Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.     

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.     

Ranking of Placer Gold Prospects in Chile Through Analytic Hierarchy Process

Chile has a rich, but poorly known history of placer gold mining. At present, this sector is almost nonexistent and there are some restrictions for its revival: disperse and partial information on existing resources and limited technical expertise to assess the potential of placer gold mine sites. This paper presents the background, methodology and results of the prioritization process of known prospects of this kind in Chile. This research was part of a publicly funded project aimed to incentivize the development of this industry. The ranking was carried out using the analytic hierarchy process, which allowed to include different quantitative and qualitative variables related to the economic potential, technical aspects, contextual viability and socioeconomic factors in the analysis. The results show that, despite the increasing relevance of environmental and community issues in mining development, the business potential and the economic/technical aspects are the main factors in the early selection of a site to advance in exploration and development activities. Both variables represented around 40% and 37% of weights in the final selection, respectively. In contrast, contextual viability and local socioeconomic impacts only accounted for the remaining 23%. This study also shows that the inclusion of experts with different backgrounds in the process enriches the analysis and does not significantly distort the final outcome of the prioritization. Finally, the relevance of using MCDM tools when assessing the attractiveness of mine sites for their development is highlighted, particularly when public funds for subsequent exploration activities are committed.

     

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...     

Evidence for multiple 4.0–3.7 Ga impact events within the Apollo 16 collection

In a histogram of lunar impact ages from the Apollo 16 site, there is a spike circa 3.9 Ga that has been interpreted to represent either a large number of nearly synchronous events or an abundance of samples that were affected slightly differently by the event that produced the Imbrium basin. To further scrutinize those age relationships, we extracted six centimeter‐sized clasts of impact melt from ancient regolith breccia 60016 and performed petrological and geochronological (⁴⁰Ar‐³⁹Ar) analyses. Three clasts have similar poikilitic textures, while others have porphyritic, aphanitic, or intergranular textures. Compositions and abundances of relict minerals are different in all six clasts and variously imply Mg‐suite and ferroan anorthosite target sequences. Estimated bulk compositions of four clasts are similar to previously defined group 1 Apollo 16 impact melt rocks, while the other two have higher Al₂O₃ and lower FeO+MgO compositions. All six clasts have similar K₂O and P₂O₅ concentrations, which could have been derived from a KREEP‐bearing component among target sequences. Eighteen ⁴⁰Ar/³⁹Ar analyses of the six clasts produced an age range from 3823 ± 75 to 4000 ± 23 Ma, consistent with estimates for the proposed late heavy bombardment. Four clasts have multiple temperature steps that define plateau ages. These ages are distinct, so they cannot be explained by a single impact event, such as the one that produced the Imbrium impact basin. The conclusion that these represent distinct ages remains after considering the possibility of artifacts in defining plateaus.     

The constancy of galactic cosmic rays as recorded by cosmogenic nuclides in iron meteorites

We measured the He, Ne, and Ar isotopic concentrations and the ¹⁰Be, ²⁶Al, ³⁶Cl, and ⁴¹Ca concentrations in 56 iron meteorites of groups IIIAB, IIAB, IVA, IC, IIA, IIB, and one ungrouped. From ⁴¹Ca and ³⁶Cl data, we calculated terrestrial ages indistinguishable from zero for six samples, indicating recent falls, up to 562 ± 86 ka. Three of the studied meteorites are falls. The data for the other 47 irons confirm that terrestrial ages for iron meteorites can be as long as a few hundred thousand years even in relatively humid conditions. The ³⁶Cl‐³⁶Ar cosmic ray exposure (CRE) ages range from 4.3 ± 0.4 Ma to 652 ± 99 Ma. By including literature data, we established a consistent and reliable CRE age database for 67 iron meteorites. The high quality of the CRE ages enables us to study structures in the CRE age histogram more reliably. At first sight, the CRE age histogram shows peaks at about 400 and 630 Ma. After correction for pairing, the updated CRE age histogram comprises 41 individual samples and shows no indications of temporal periodicity, especially not if one considers each iron meteorite group separately. Our study contradicts the hypothesis of periodic GCR intensity variations (Shaviv 2002, 2003), confirming other studies indicating that there are no periodic structures in the CRE age histogram (e.g., Rahmstorf et al. 2004; Jahnke 2005). The data contradict the hypothesis that periodic GCR intensity variations might have triggered periodic Earth climate changes. The ³⁶Cl‐³⁶Ar CRE ages are on average 40% lower than the ⁴¹K‐K CRE ages (e.g., Voshage 1967). This offset can either be due to an offset in the ⁴¹K‐K dating system or due to a significantly lower GCR intensity in the time interval 195–656 Ma compared to the recent past. A 40% lower GCR intensity, however, would have increased the Earth temperature by up to 2 °C, which seems unrealistic and leaves an ill‐defined ⁴¹K‐K CRE age system the most likely explanation. Finally, we present new ²⁶Al/²¹Ne and ¹⁰Be/²¹Ne production rate ratios of 0.32 ± 0.01 and 0.44 ± 0.03, respectively.     

In situ U–Pb analysis of shocked zircon from the Charlevoix impact structure,Québec,Canada

Laser ablation inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) U–Pb geochronology of shocked zircon grains in a vesicular‐fluidal impact melt rock from the ≥54 km Charlevoix impact structure, Québec, Canada, suggests an Ordovician to Silurian age of 450 ± 20 Ma for the impact. This age is anchored by concordant U–Pb results of ~450 Ma for a U‐rich, cryptocrystalline zircon grain in the melt rock, interpreted as a recrystallized metamict zircon crystal; the U–Th–Pb system of the metamict grain was seemingly chronometrically reset by the Charlevoix impact, but withstood later tectonometamorphic events. The new zircon age for Charlevoix is in agreement with a stratigraphically constrained Late Ordovician maximum age of ~453 Ma and corroborates earlier suggestions that the impact occurred most likely in the Ordovician, and not ~100 Myr later, as indicated by previous K/Ar and ⁴⁰Ar/³⁹Ar geochronologic results. The latter may reflect postimpact thermal overprint of impactites during the Salinian (Late Silurian to Early Devonian) and/or Acadian (Late Devonian) orogenies. U–Pb geochronology of zircon crystals in anorthosite exposed in the central uplift of the impact structure yielded a Grenvillian crystallization age of 1062 ± 11 Ma. The preferred Ordovician age for the Charlevoix impact structure, which is partially overthrusted by the Appalachian front, suggests the impact occurred during a phase of Taconian tectonism and an episode of enhanced asteroid bombardment of the Earth. Our results, moreover, demonstrate that (recrystallized) metamict zircon grains may be of particular interest in impact geochronology.     

Geological and geophysical studies of the Agoudal impact structure (Central High Atlas,Morocco): New evidence for crater size and age

Since the discovery of shatter cones (SCs) near the village of Agoudal (Morocco, Central High Atlas Mountains) in 2013, the absence of one or several associated circular structures led to speculation about the age of the impact event, the number, and the size of the impact crater or craters. Additional constraints on the crater size, age, and erosion rates are obtained here from geological, structural, and geophysical mapping and from cosmogenic nuclide data. Our geological maps of the Agoudal impact site at the scales of 1:30,000 (6 km²) and 1:15,000 (2.25 km²) include all known occurrences of SCs in target rocks, breccias, and vertical to overturned strata. Considering that strata surrounding the impact site are subhorizontal, we argue that disturbed strata are related to the impact event. Three types of breccias have been observed. Two of them (br1‐2 and br2) could be produced by erosion–sedimentation–consolidation processes, with no evidence for impact breccias, while breccia (br1) might be impact related. The most probable center of the structure is estimated at 31°59′13.73?N, 5°30′55.14?W using the concentric deviation method applied to the orientation of strata over the disturbed area. Despite the absence of a morphological expression, the ground magnetic and electromagnetic surveys reveal anomalies spatially associated with disturbed strata and SC occurrences. The geophysical data, the structural observations, and the area of occurrence of SCs in target rocks are all consistent with an original size of 1.4–4.2 km in diameter. Cosmogenic nuclide data (³⁶Cl) constrain the local erosion rates between 220 ± 22 m Ma^?1 and 430 ± 43 m Ma^?1. These erosion rates may remove the topographic expression of such a crater and its ejecta in a time period of about 0.3–1.9 Ma. This age is older than the Agoudal iron meteorite age (105 ± 40 kyr). This new age constraint excludes the possibility of a genetic relationship between the Agoudal iron meteorite fall and the formation of the Agoudal impact site. A chronolgy chart including the Atlas orogeny, the alternation of sedimentation and erosion periods, and the meteoritic impacts is presented based on all obtained and combined data.     

用于极地的中尺度大气模式Polar MM5的改进和检验

介绍了一个用于极地研究的中尺度大气模式———Polar MM5,阐述了该模式区别于标准的中尺度大气模式MM5的动力学和物理特征。利用Polar MM5获得了10 d的模拟结果表明,Polar MM5能较好地模拟高纬度地区近地面气象变量特征,尤其是对近地面温度和水汽混合比可得到高精度模拟结果,证实了在高纬度地区对标准MM5所进行的物理参数化方案的改进是切实有效的。     

Faunas from the upper silurian (upper ludlovian) in the ludlow-much wenlock district,England

Faunal lists for 17 sections in the Overton Formation are presented. Faunal diversity appears to increase towards the formations base while faunal dominance appears to increase towards its top.