Astron observations of the Rapid Burster MXB 1730-335 and constraints on burster parameters from spectra of trailing bursts

We report on eight X-ray bursts detected by ASTRON from the Rapid Burster (RB) on 13 and 28 April and 16 August, 1983. Six of them (trailing bursts), with durations of 1.5–2 min, rise times of 5–10 s and intervals of 1–1.5 hours, exhibit spectral softening during the burst decay and may be related to the type I bursts. Two of the bursts (triangle bursts) observed on 28 April at interval of 28 min with much longer rise times (30–50 s) and longer durations (3 min), do not show distinct spectral softening. Persistent flux from RB on 16 August was estimated asF _p(2.0–2.4)×10^–9 erg cm^–2 s^–1. Spectral evolution of two trailing bursts was investigated by fitting their spectra in consecutive time intervals with the blackbody (BB), isothermal scattering photosphere (SP) and thermal bremsstrahlung (TB) models. Around the burst maxima the SP model fits the data best whereas in the burst tails the TB model is generally better. The BB model is worse than at least one of the two others. Interpretation of the burst spectra in terms of the BB radiation leads to improbably small neutron star mass and radius (M<0.86M ,R _NS<5 km) if the peak luminosity does not exceed the Eddington limit. Interpretation of the spectra around the burst maxima (3–15 s from the burst onset) in terms of an isothermal SP yields reasonable constraints onM,R _NS, and distanceD. For instance, for the hydrogen photosphere we obtainedM=(1.0–2.1)M R _NS=(7.1–16.4) km ifD=11 kpc. If one postulatesM=1.4M , thenD=(8.5–13) kpc for hydrogen photosphere; if, besides,D=11 kpc, thenR _NS=(8.1–13.3) km. It follows also from the SP-interpretation that the photosphere radius may increase up to 20–30 km in maxima of the trailing bursts when the luminosity becomes close to the Eddington luminosity.     

Drift in toroidal configurations

It is found that charged particles of positive energiesE, when constrained on axisymmetric isoflux surfaces , execute sinusoidal motions with typical frequencies =(2E/m)^1/2). In general, it was found that under equilibrium condition p=J ^B/cthe particles develop a non-ambipolar drift velocityv _d =(cµ/eb)[1+q ² +2(q/)²]p.     

Transmission and reflection of Rayleigh waves at a thin low velocity vertical layer: A laboratory and theoretical study

A three-dimensional ultrasonic modelling was used to study the Rayleigh waves reflected from a thin low velocity vertical layer and those transmitted through the same zone. The reflection and transmission coefficients of the Rayleigh waves have been calculated by an approximate method based on the Green function technique. Nonrigid contact boundary conditions were used for the low velocity layer modelling. A rather good correspondence between the theoretical and experimental absolute values of the reflection and the transmission coefficients was obtained. Some discrepancies between experimental and theoretical results, in particular with regard to phase shifts, may be explained by a certain inadequacy of the theoretical model to the low velocity layer investigated by the ultrasonic modelling.     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

Magmatism in the eastern Aleutian Arc: temporal characteristic of igneous activity on Akutan Island

Lavas from Akutan Island, located in the eastern Aleutian arc at the transition between continental and oceanic crust, show a gradual change in their petrologic and chemical characteristics over the last 4 million years. The oldest lavas exposed on the island, the Hot Springs Bay Volcanics (HSBV), range from magnesian basalt to dacite (45%–62% SiO₂). The most mafic basalts contain salitic clinopyroxene, Cr- and Al-rich spinel, and pargasitic amphibole suggesting that they were derived from relatively hydrous magmas at greater pressures than lavas from the younger Akutan Volcanics (AKV) and the modern volcano (MOD). AKV lavas also range between basalt and dacite (46%–63% SiO₂), but contain no hydrous phenocrysts and seem to have fractionated within a shallow level magma chamber. Lavas from the modern volcano are andesitic (52%–57% SiO₂) and have a mineral assemblage similar to that of AKV lavas of similar composition. With the exception of clinopyroxene and spinel in the most mafic lavas, the compositions of plagioclase (An_92?45), olivine (Fo_88?51), orthopyroxene (En_69?56), and titanomagnetite (15%–21% TiO₂) phenocrysts found in these lavas are within the range observed in lavas from other Aleutian volcanoes. Variations in the major element chemistry of the older lavas can be reproduced by fractional crystallization of the observed mineral assemblages, however closed system crystal fractionation models are inadequate to explain the trace element variations. During the last 4 million years, La/Yb ratios have decreased (6.5–3.3 for HSBV lavas and 2.9–1.9 for MOD lavas) whereas Ba/La ratios appear to have increased slightly (37–43 for HSBV and AKV, and 41–45 of MOD). The lower La/Yb ratios of MOD lavas correspond with lower total abundances of the REE and slightly higher Sr and Pb isotopic ratios. The increased⁸⁷Sr/⁸⁶Sr ratios and Pb isotopic ratios in the MOD lavas, the less enriched LREE, and the higher Ba/La ratios may result from partial melting of an arc source which has experienced previous melting events but has continued to be contaminated by a component from the subducting slab. It may also indicate a change in the degree of partial melting of the underlying mantle, which corresponds to a different percentage of a slab derived component being incorporated into the overlying mantle.     

Transmission electron microscopy of subsolidus oxidation and weathering of olivine

Olivine crystals in basaltic andesites which crop out in the Abert Rim, south-central Oregon have been studied by high-resolution and analytical transmission electron microscopy. The observations reveal three distinct assemblages of alteration products that seem to correspond to three episodes of olivine oxidation. The olivine crystals contain rare, dense arrays of coherently intergrown Ti-free magnetite and inclusions of a phase inferred to be amorphous silica. We interpret this first assemblage to be the product of an early subsolidus oxidation event in the lava. The second olivine alteration assemblage contains complex ordered intergrowths on (001) of forsterite-rich olivine and laihunite (distorted olivine structure with Fe³⁺ charge balanced by vacancies). Based on experimental results for laihunite synthesis (Kondoh et al. 1985), these intergrowths probably formed by olivine oxidation between 400 and 800°C. The third episode of alteration involves the destruction of olivine by low-temperature hydrothermal alteration and weathering. Elongate etch-pits and channels in the margins of fresh olivine crystals contain semi-oriented bands of smectite. Olivine weathers to smectite and hematite, and subsequently to arrays of oriented hematite crystals. The textures resemble those reported by Eggleton (1984) and Smith et al. (1987). We find no evidence for a metastable phase intermediate between olivine and smectite (M — Eggleton 1984). The presence of laihunite exerts a strong control on the geometry of olivine weathering. Single laihunite layers and laihunite-forsteritic olivine intergrowths increase the resistance of crystals to weathering. Preferential development of channels between laihunite layers occurs where growth of laihunite produced compositional variations in olivine, rather than where coherency-strain is associated with laihunite-olivine interfaces.     

Petrology,isotope characteristics,and K-Ar ages of the Maranhão,northern Brazil,Mesozoic basalt province

Northern Brazil contains remnants of Mesozoic flood basalts and hypabyssal rocks that were apparently emplaced during tectonism related to opening of the Atlantic Ocean. Analyses and new K-Ar ages reveal that this 700x250 km Maranhão province (5°–8°S) has low-Ti basalts (1.1 wt% TiO₂) in the western part that range about 160 to 190 Ma, and high-Ti basalts (3.4–4.4 wt% TiO₂) in the eastern part about 115–122 Ma. Low-Ti basalt compositions are less evolved and have a smaller range, Mg# 62-56, than the high-Ti basalts, Mg# 44–33. General characteristics of the least evolved members of low- and high-Ti groups include, respectively, Zr 100 and 250 ppm, Sr 225 and 475 ppm, Ba 200 and 500 ppm, Nb 10 and 26 ppm, Y 29 and 36 ppm, La/Yb_(n) 4.2 and 8.8, where La_(n) is 30 and 90. Overall compositions resemble the low- and high-Ti basaltic rocks of the Mesozoic Serra Geral (Paraná) province in southern Brazil. The Maranhão low-Ti basalts have more radiogenic Sr and Pb and higher ¹⁸O than the high-Ti basalts. Respectively, low- vs high-Ti: _Sr26–54 vs 15–18; ²⁰⁶Pb/²⁰⁴Pb=18.25–.78 vs 18.22–.24; and ¹⁸O 8.9–12.6 vs 6.5–8.6. Nd isotopes overlap: _Nd–1.6 to –3.8 vs –2.1 to –3. Ages, compositions, and isotopes indicate that the low- and high-Ti groups had independent parentages from enriched subcontinental mantle. However, both groups can be modeled from one source composition if low-Ti basalt isotopes reflect crustal contamination, and if the parentages for each group were picritic liquids that represent either higher (for low-Ti) or lower (for high-Ti) percentages of melting of that single source. When comparing Pb isotopes of Maranhão and Serra Geral high-Ti basalts (uncontaminated) to evaluate the DUPAL anomaly, Maranhão has Pb 7/4=4.6–11, and Pb 8/4=72–87; Serra Geral has Pb 7/4=10–13, and Pb 8/4=95–125. The small difference is not enough to conform to DUPAL contours, and is inconsistent with large-scale isotopic heterogeneity of mantle beneath Brazil prior to rifting of South America from Africa. Maranhão low-Ti magmas probably relate to the opening of central North Atlantic, and high-Ti magmas to the opening of equatorial Atlantic. The proposed greater percentage of source melting for low-Ti basalts may reflect a Triassic-Jurassic hotspot, while lesser melting for high-Ti magmas may relate to Cretaceous decompressional (rifting) melting.     

Carbon isotopic fractionation between CO2 vapour,silicate and carbonate melts: an experimental study to 30 kbar

The carbon isotopic fractionation between CO₂ vapour and sodamelilite (NaCaAlSi₂O₇) melt over a range of pressures and temperatures has been investigated using solid-media piston-cylinder high pressure apparatus. Ag₂C₂O₄ was the source of CO₂ and experimental oxygen fugacity was buffered at hematite-magnetite by the double capsule technique. The abundance and isotopic composition of carbon dissolved in sodamelilite (SM) glass were determined by stepped heating and the ¹³C of coexisting vapour was determined directly by capsule piercing. CO₂ solubility in SM displays a complex behavior with temperature. At pressures up to 10 kbars CO₂ dissolves in SM to form carbonate ion complexes and the solubility data suggest slight negative temperature dependence. Above 20 kbars CO₂ reacts with SM to form immiscible Na-rich silicate and Ca-rich carbonate melts and CO₂ solubility in Na-enriched silicate melt rises with increasing temperature above the liquidus. Measured values for carbon isotopic fractionation between CO₂ vapour and carbonate ions dissoived in sodamelilite melt at 1200°–1400° C and 5–30 kbars average 2.4±0.2, favouring¹³C enrichment in CO₂ vapour. The results are maxima and are independent of pressure and temperature. Similar values of 2 are obtained for the carbon isotopic fractionation between CO₂ vapour and carbonate melts at 1300°–1400° C and 20–30 kbars.     

Examples of predominantly two-body orbits in the Sun-Jupiter asteroid system

Accurate numerical continuation of families of plane symmetric direct periodic orbits around the large primary in the Sun-Jupiter case of the restricted problem of three bodies allows the determination of the vertical branching points where families of three-dimensional symmetric periodic orbits bifurcate from the planar ones. Three families of plane periodic orbits, and the initial segments of ten bifurcating families of three-dimensional ones are determined. The stability of these families is examined and examples of their orbits are illustrated.     

Hypersensitization of Kodak infrared plates: Results of some chemical methods and pre-exposure

Tests have been carried out on Kodak Spectroscopic Plates Type I-N, in order to find a treatment which could be easily applied to the infrared plates to be used with the Loiano 152 cm,f/8, Ritchey-Chrétien telescope. Different techniques have been tested, not only with the aim of achieving the higher speed gain, but also to obtain the better uniformity and reproducibility. Our results suggest that the advantages of preexposure techniques are underestimated in this respect. Furthermore, we find that blue and infrared preexposures (at 0.8 s) give different results, suggesting a different degree of dispersity in the latent image produced by pre-exposure in the two cases.Baths including both ammonia and Ag-compounds provide the higher speed gains, but the increment of the fog is often non-uniform and/or very high. The best results have been obtained with baths including AgNO₃ and AgCl. The rejuvenation process found by Sanduleak and the results obtained by Jenkins and Farnell on the reversibility of the gains due to silver-nitrate baths have been confirmed.