Effect of polychromatic X‐ray microtomography imaging on the amino acid content of the Murchison CM chondrite

X‐ray microcomputed tomography (μCT) is a useful means of characterizing cosmochemical samples such as meteorites or robotically returned samples. However, there are occasional concerns that the use of μCT may be detrimental to the organic components of a chondrite. Small organic compounds such as amino acids comprise up to ~10% of the total solvent extractable carbon in CM carbonaceous chondrites. We irradiated three samples of the Murchison CM carbonaceous chondrite under conditions akin to and harsher than those typically used during typical benchtop X‐ray μCT imaging experiments to determine if detectable changes in the amino acid abundance and distribution relative to a nonexposed Murchison control sample occurred. After subjecting three meteorite samples to ionizing radiation dosages between ~300 Gray (Gy) and 3 kGy with bremstrahlung X‐rays, we analyzed the amino acid content of each sample. Within sampling and analytical errors, we cannot discern differences in the amino acid abundances and amino acid enantiomeric ratios when comparing the control samples (nonexposed Murchison) and the irradiated samples. We conclude that a polychromatic X‐ray μCT experiment does not alter the abundances of amino acids to a degree greater than how well those abundances are measured with our techniques and therefore any damage to amino acids is minimal.     

Water Cooperation Priorities in the Lancang-Mekong River Basin Based on Cooperative Events Since the Mekong River Commission Establishment

The Lancang-Mekong River has attracted much attention from researchers, but the cooperation on water issues in this river basin has been limited, even after the establishment of the Mekong River Commission(MRC). Cooperation on water resources has been determined as one of the key priority areas in the Lancang-Mekong Cooperation Mechanism, but there are no details of targets. In order to establish the priorities of water cooperation under the mechanism, we adopted nine categories to classify the objectives of 87 water cooperation events based on the ‘Lancang-Mekong Water Cooperative Events Database' from 1995 to 2015. Based on the occurrence of cooperative events, cooperative objectives, cooperative scales, and approaches to cooperation, we conducted statistical, correlation, and text analyses. Our analyses indicated the following results: under the impact of economic conditions inside and outside the river basin, full cooperation appeared more difficult than bilateral and multilateral cooperation. Each of the partners adopted different preferences for cooperation targets. Cooperation with more definite objectives was easier to establish than cooperation with broader and more complex objectives. The potential objectives for water cooperation were navigation, hydropower, joint management, data sharing, flood control and water use. Because hydropower development is controversial, and because water cooperation is avoided by most existing regional cooperation mechanisms due to its complexity, we suggest the following priority areas for water cooperation in the Lancang-Mekong River Basin. 1) Navigation and flood control/drought relief are attractive objectives for all the riparian countries across the whole watershed. 2) Data sharing should be a priority for cooperation in the watershed due to its laying the foundation for the equitable and reasonable utilization of transboundary waters. 3) Hydropower is an objective best implemented mainly through bilateral cooperation, and on tributaries.     

Specifying a joint space- and time-lag using a bivariate Poisson distribution

Separate space- or time-lags have been considered regularly in data analyses; as space–time models are more recently being studied extensively in data analytic fashion, joint estimation of both lags has to be considered explicitly. This paper addresses this issue, taking into special consideration parametric parsimony together with specification richness; use of the bivariate Poisson frequency distribution is advocated and applied to an empirical case. The relation of this approach to random effects specifications is investigated. Data for Belgian regional products constitute the empirical case study.

The application of remote sensing to environmental archaeology

An area in the Fenlands of Eastern England was used to assess the spectral, spatial, and seasonal requirements of airborne multispectral data for identifying wetland archaeological features by detecting crop and soil marks. Ordination of data from a scanner with 11 spectral channels was achieved using the Sheffield method, which calculates the wavebands that produce a 3 band composite image with optimum contrast using band variances and interband correlations. the spatial detail requirements for multispectral data were investigated by applying an edge enhancing filter to single waveband images. the loss of feature clarity with increased levels of spatial smoothing is visually apparent. Seasonal variation in crop mark visibility was quantified by cross tabulating feature visibility in fields known to contain features with time period and sensor type. If remote sensing is to be used for repeated operational archaeological survey then the quality and quantity of information which can be gained from the data must be evaluated. This study attempts to define some of the necessary operational requirements for the use of multispectral data for archaeology.     

Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters

Habitat mapping data are increasingly being recognised for their importance in underpinning marine spatial planning. The ability to collect ultra-high resolution (cm) multibeam echosounder (MBES) data in shallow waters has facilitated understanding of the fine-scale distribution of benthic habitats in these areas that are often prone to human disturbance. Developing quantitative and objective approaches to integrate MBES data with ground observations for predictive modelling is essential for ensuring repeatability and providing confidence measures for habitat mapping products. Whilst supervised classification approaches are becoming more common, users are often faced with a decision whether to implement a pixel based (PB) or an object based (OB) image analysis approach, with often limited understanding of the potential influence of that decision on final map products and relative importance of data inputs to patterns observed. In this study, we apply an ensemble learning approach capable of integrating PB and OB Image Analysis from ultra-high resolution MBES bathymetry and backscatter data for mapping benthic habitats in Refuge Cove, a temperate coastal embayment in south-east Australia. We demonstrate the relative importance of PB and OB seafloor derivatives for the five broad benthic habitats that dominate the site. We found that OB and PB approaches performed well with differences in classification accuracy but not discernible statistically. However, a model incorporating elements of both approaches proved to be significantly more accurate than OB or PB methods alone and demonstrate the benefits of using MBES bathymetry and backscatter combined for class discrimination.     

Multibeam sonar backscatter data processing

Multibeam sonar systems now routinely record seafloor backscatter data, which are processed into backscatter mosaics and angular responses, both of which can assist in identifying seafloor types and morphology. Those data products are obtained from the multibeam sonar raw data files through a sequence of data processing stages that follows a basic plan, but the implementation of which varies greatly between sonar systems and software. In this article, we provide a comprehensive review of this backscatter data processing chain, with a focus on the variability in the possible implementation of each processing stage. Our objective for undertaking this task is twofold: (1) to provide an overview of backscatter data processing for the consideration of the general user and (2) to provide suggestions to multibeam sonar manufacturers, software providers and the operators of these systems and software for eventually reducing the lack of control, uncertainty and variability associated with current data processing implementations and the resulting backscatter data products. One such suggestion is the adoption of a nomenclature for increasingly refined levels of processing, akin to the nomenclature adopted for satellite remote-sensing data deliverables.     

Time distributions in satellite constellation design

The aim of the time distribution methodology presented in this paper is to generate constellations whose satellites share a set of relative trajectories in a given time, and maintain that property over time without orbit corrections. The model takes into account a series of orbital perturbations such as the gravitational potential of the Earth, the atmospheric drag, the Sun and the Moon as disturbing third bodies and the solar radiation pressure. These perturbations are included in the design process of the constellation. Moreover, the whole methodology allows to design constellations with multiple relative trajectories that can be distributed in a minimum number of inertial orbits.     

Sedimentary facies,production rates and facies models for recent coralline algal gravels,Co. Galway,Ireland

Five sedimentary facies are described from SCUBA diving examination and sampling of Mannin Bay, Ireland. A Bank facies is built up by the unattached coralline algae Lithothamnium corallioides and Phymatolithon calcareum. This autochthonous facies occurs in shallow sheltered environments. In exposed areas a rippled Clean Algal Gravel facies is found composed of coralline and molluscan debris. In intermediate energy areas a Muddy Algal Gravel facies is found with small amounts of live corallines. Sheltered creeks have a Mud facies which is partly carbonate and partly terrigenous. The shallow water coralline algal sediments are overlapped by a Fine Sand facies of mixed biogenic composition. Each facies is characterized by particular phenotypic growth forms of the unattached corallines. Rates of organic calcium carbonate production are obtained which are found to be similar to rates from shallow tropical non-reef environments. The carbonate sediments of Mannin Bay are compared with similar sediments from Kilkerrin Bay. Ireland, from Brittany and from Falmouth Harbour. From these comparisons, facies models are proposed for these carbonate sediments. The major factor controlling facies distribution is coastal morphology. The present day shelf is considered to be too exposed to preserve complete sequences of the shallow water sediments.     

Extrusion movements of a tunnel head reinforced by finite length bolts—a closed‐form solution using homogenization approach

An analytical model on the general behaviour of a tunnel head, reinforced by finite length bolts is proposed. This model is based on the homogenization method and spherical symmetry assumption. Despite its simplicity, and in consequence its limits of validity, it does allow a quick estimation of the key design parameters: frontal displacement, extension of decompressed zone, ground stresses and bolt tension, and constitutes thereby a very useful and handy tool for design engineers. In particular, the influence of the reinforcement length, as well as other important design parameters, are studied by the proposed model. The charts resulting from the parametric studies are directly applicable. Otherwise, the comparison to a 3D numerical model is also presented in this paper. The first results provide the validation of the analytical solution, at least in terms of average extrusion movements. Copyright © 2000 John Wiley & Sons, Ltd.     

Comparative studies of the kinetic parameters of various algaenans and kerogens via open-system pyrolyses

Kinetic parameters were determined for the first time, via open-system pyrolyses, on algaenans (highly resistant biomacromolecules that are selectively preserved during kerogen formation) isolated from extant microalgae. Parallel studies were also carried out on 10 kerogens exhibiting, with one exception, a low level of maturity. These kerogens included samples chiefly derived from the selective preservation of the above algaenans and samples mainly, or almost exclusively, derived from the “natural vulcanization” pathway. Important differences in activation energy (E_a) distributions were observed between the four algaenans investigated and correlated with their chemical structures. The kerogens predominantly derived from algaenan-selective preservation (Pula alginite, NE 70 and BJ 248 Torbanites, Rundle Oil Shale) also exhibited pronounced differences in E_a distributions. These distributions provided: (i) information on the diversity of the source materials; and (ii) reflected the occurrence of important differences in chemical structures and thermal behaviour between three of the tested kerogens, even though they are all classified as low maturity type I. The Kimmeridge Clay samples and the Lorca Oil Shale showed broad E_a distributions shifted to low energies when compared with the above algaenans and kerogens. Such shifts reflect an important (or even almost exclusive for some of these kerogens) contribution of materials originating from sulphur incorporation into various lipids during early diagenesis. Finally, the kinetic data derived for the nine low maturity fossil samples were extrapolated to a very low, geological heating rate of 3°C Ma⁻¹ and the generation rate curves and cumulative yield curves thus obtained were compared.