Characteristics of Saturated Soft Clay in Dynamic Deformation

-This paper presents the research results of dynamic pore water pressure and the characteristics of dynamic deformation of saturated soft clay and the factors affecting the dynamic pore water pressure and dynamic deformation. Dynamic triaxial compression tests are carried out and the soil samples used in the tests are remoulded clay from the seabed of the Bohai Bay. The paper also deals with the dynamic deformation mechanism of saturated soft clay foundation without drain. A calculation model for permanent dynamic deformation of saturated soft clay foundation has been established.     

Application of A Fast Multipole BIEM for Flow Diffraction from A 3D Body

A Fast Multipole Method (FMM) is developed as a numerical approach to the reduction of the computational cost and requirement memory capacity for a large in solving large-scale problems. In this paper it is applied to the boundary integral equation method (BIEM) for current diffraction from arbitrary 3D bodies. The boundary integral equation is discretized by higher order elements, the FMM is applied to avoid the matrix/vector product, and the resulting algebraic equation is solved by the Generalized Conjugate Residual method (GCR). Numerical examination shows that the FMM is more efficient than the direct evaluation method in computational cost and storage of computers.     

Reflection of Oblique Incident Waves by Breakwaters with Partially-Perforated Wall

The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity poten-tials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.     

Numerical Simulation of Wave Height and Wave Set-Up in Nearshore Regions

Based on the time dependent mild slope equation including the effect of wave energy dissipation, an expression for the energy dissipation factor is derived in conjunction with the wave energy balance equation, and then a practical method for the simulation of wave height and wave set-up in nearshore regions is presented. The variation of the complex wave amplitude is numerically simulated by use of the parabolic mild slope equation including the effect of wave energy dissipation due to wave breaking. The components of wave radiation stress are calculated subsequently by new expressions for them according to the obtained complex wave amplitude, and then the depth-averaged equation is applied to the calculation of wave set-up due to wave breaking. Numerical results are in good agreement with experimental data, showing that the expression for the energy dissipation factor is reasonable and that the new method is effective for the simulation of wave set-up due to wave breaking in nearshore regions.     

Wave-Induced Seepage Force Acting on Cylinder Groups

Wave-induced seepage force acting on cylinder groups is studied by using Biot consolidation theory in this paper. Both tandem arrangement and side by side arrangement are considered simultaneously. The variations of the coefficient of grouping effect with the distance between cylinders for different KD are discussed. In order to verify the numerical solution, several sets of experiments are conducted. The agreement between numerical and experimental solutions is satisfactory.     

Numerical Model of Cnoidal Wave Flume

The volume of fluid(VOF)method is used to set up a wave flume with an absorbing wavemaker of cnoidal waves.Based on the transfer function between wave surface and paddle velocity obtained bythe shallow water wave theory,the velocity boundary condition of an absorbing wave maker is introduced toabsorb reflected waves that reach the numerical wave maker.For H/d ranging from 0.1 to 0.59 and T(g/d)~(1/2)from 7.9 to 18.3,the parametric studies have been carried out and compared with experiments.     

Nonlinear Model of Mean Free Surface of Waves

-A nonlinear model of mean free surface of waves or wave set-up is presented.The model isbased on that of Roelvink(1993),but the numerical techniques used in the solution are based on theWeighted-Average Flux(WAF)method(Watson et al,1992),with Time-Operator-Splitting(TOS)usedfor the treatment of the source terms.This method allows a small number of computational points to beused,and is particularly efficient in modeling wave set-up.The short wave(or primary wave)energy equa-tion is solved by use of a more traditional Lax-Wendroff technique.A nonlinear wave theory(James,1974)is introduced.The model described in this paper is found to be satisfactory in most respects whencompared with the measurements conducted by Stive(1983)except in modeling the mean free surface veryclose to the mean shoreline.     

Numerical simulation of tidal current and erosion and sedimentation in the Yangshan deep-water harbor of Shanghai

Yangshan near-shore sea area is the multi-island and multi-channel area with strong flow velocity and high suspended sediment concentration. Based on the characteristics of tidal currents, waves, and sediment in the Yangshan area, a two-dimensional numerical model of tidal currents, sediment transport, and sea bed deformation is developed. In the model, the effects of tidal currents and wind waves on sediment transport are considered. According to characteristics of the study area, unstructured grids are applied to fit the boundaries of the near-shore sea area. The results show that the calculated values are in good agreement with the measured data. The field of tidal currents, suspended sediment concentrations, and the deformation of the seabed can be successfully simulated.     

船体曲面几何表达及水动力性能计算的NURBS方法

采用非均匀有理B样条(NURBS)对船体曲面形状进行几何表达,所生成的网格直接用于后续的有关船体水动力性能计算工作中。对Wigley船型的线性兴波阻力和斜航操纵运动的船体,结合近似的Kutta条件作了相应的数值计算,从与试验结果的比较来看,该方法具有较好的工程精度,对船舶及海洋工程领域中的计算机辅助设计(CAD)与计算流体动力学(CFD)之间的相互集成,具有推动与促进作用。