Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

The Dynamic Evaluation of Rock Slope Stability Considering the Effects of Microseismic Damage

A state-of-the-art microseismic monitoring system has been implemented at the left bank slope of the Jinping first stage hydropower station since June 2009. The main objectives are to ensure slope safety under continuous excavation at the left slope, and, very recently, the safety of the concrete arch dam. The safety of the excavated slope is investigated through the development of fast and accurate real-time event location techniques aimed at assessing the evolution and migration of the seismic activity, as well as through the development of prediction capabilities for rock slope instability. Myriads of seismic events at the slope have been recorded by the microseismic monitoring system. Regions of damaged rock mass have been identified and delineated on the basis of the tempo-spatial distribution analysis of microseismic activity during the periods of excavation and consolidation grouting. However, how to effectively utilize the abundant microseismic data in order to quantify the stability of the slope remains a challenge. In this paper, a rock mass damage evolutional model based on microseismic data is proposed, combined with a 3D finite element method (FEM) model for feedback analysis of the left bank slope stability. The model elements with microseismic damage are interrogated and the deteriorated mechanical parameters determined accordingly. The relationship between microseismic activities induced by rock mass damage during slope instability, strength degradation, and dynamic instability of the slope are explored, and the slope stability is quantitatively evaluated. The results indicate that a constitutive relation considering microseismic damage is concordant with the simulation results and the influence of rock mass damage can be allowed for its feedback analysis of 3D slope stability. In addition, the safety coefficient of the rock slope considering microseismic damage is reduced by a value of 0.11, in comparison to the virgin rock slope model. Our results demonstrate that microseismic activity induced by construction disturbance only slightly affects the stability of the slope. The proposed feedback analysis technique provides a novel method for dynamically assessing rock slope stability and can be used to assess the slope stability of other similar rock slopes.     

叠覆式三角洲——一种特殊的浅水三角洲

不同于常规三角洲以分流河道体系所形成的分流河道、河口坝、席状砂等微相为三角洲朵体的基本单元,叠覆式三角洲以内部结构简单的朵体为基本构成单元,朵体相互叠置,形成复合叠合体,进而构成三角洲骨架。单个朵体由河道扫描或扩展而成,复合朵体则是由单朵体侧向迁移或前(退)积而成。三角洲因大量朵体叠置而形成厚层状、内部结构复杂的复合砂体。不同朵体形成于不同时期,因而不存在统一的分流体系,单一沉积体具有层状特征,但不同期朵体受可容空间和地貌控制,呈三维叠置,而非简单的层状叠加,从而使得三角洲内部呈现出拼合式、立体式特点。单朵体是结构的基本单元,发育范围有限,与相邻朵体发育于不同时间单元,因而只能在复合体约束下小范围追踪。单一朵体接触关系及接触界面的渗流能力决定了油气富集和注水开发响应特征。朵体迁移、叠置造成大面积、巨厚的砂层可形成大型油气藏,而同时朵体间泥岩的不均匀分布也造就了砂体局部不连通或朵体间连通性变化,为岩性油气藏形成创造了条件,并且影响了注水开发中的注采对应性,进而影响水驱采油效果。     

福建省紫金山铜金矿床原生晕地球化学特征及深部找矿前景

通过系统采集紫金山铜金矿床4~11线共41个钻孔的岩矿样,绘制原生晕剖面图,建立垂向元素分带序列、矿体剥蚀程度准则,结合深部指示元素的特征,进行隐伏矿预测。该矿床金矿近矿晕为Au-Ag-Zn1,尾部晕为BiGa-Mo-Sn-Ti-Co-Ni-W1-V;铜矿前缘晕为Hg-Sb-As,近矿晕为Cu-Pb1-Zn2,尾部晕为Be-W2。矿体剥蚀程度评价表明,高硫型铜矿体往深部已尖灭。深部F-Mn-Pb2-Zn3的异常形态和元素组合符合典型斑岩矿床的外带特征,斑岩体延伸至矿床周边;深部的蚀变矿物组合、金属矿物组合、流体包裹体特征等均表明深部可能存在斑岩铜(钼)矿床。     

中国娱乐传媒产业全球生产网络的发展路径与地理特征

利用2012年和2017年《福布斯中国名人榜单》中娱乐明星行动轨迹数据探索中国娱乐传媒产业全球生产网络的空间组织模式。研究发现：① 中国娱乐传媒产业的全球化经历了“产品引进”“产品输出”“对外投资并购与跨国生产”几个阶段,具有明显的内需驱动式全球化特点;② 中国娱乐传媒产业生产网络形成较为明显的“核心-边缘”结构,相较于典型制造业生产网络表现出更加快速的动态演化特征;③ 娱乐传媒产业各类价值活动的地理分布呈现出显著的差异,反映出不同价值环节的需求与各区域平台、资源或市场条件的战略耦合关系;④ 中国娱乐传媒产业的国外活动呈现出向西方发达国家和亚洲邻近国家集聚的趋势,体现出发达国家主导的全球娱乐传媒市场结构以及“地理-文化邻近效应”的作用。     

Integrating a Raster Geographical Information System with Multi‐Objective Land Allocation Optimization for Conservation Reserve Design

The multi‐objective land allocation problem is to optimize the selection of land for different uses based on a set of decision objectives. For most applications, a geographical information system (GIS) is either absent or loosely coupled through file exchange. In this article the evolutionary algorithm (EA), a heuristic solution method for optimization problems, is integrated with a raster GIS to form a spatial decision support system (SDSS) for multi‐objective conservation reserve design. The SDSS effectively combines the functions of a GIS for data management, analysis, and visualization, with the optimization capability of the EA; and provides a uniform way to solve conservation reserve design problems with different types of constraints and objectives. The SDSS is demonstrated through application to the creation of conservation reserves in Bolivia to protect 17 endemic mammals.     

《海西交通图集》的编制探讨

《海西交通图集》是以省基础地理信息为基础框架,运用计算机制图技术、数据库技术和全数字桌面出版一体化技术集成制作的综合交通图集,也是一本反映海西交通基础设施及主要成就的图集。对图集的技术创新、内容选题、设计特点等进行分析与探讨。     

Relation between the “Double-Hump” Behavior in the Radio Band and the Broad-Line Luminosity for Blazars

The physics behind the spectral energy distribution (SED) of blazars remains open. We assembled 36 blazars to tackle the factors that control their SED. Now, many blazar spec- tra have the "double hump" feature in the radio and far-IR frequencies. For these a parameter, , is created to characterize the behavior of the SED. We found a significant correlation be- tween the broad-line luminosity (LBLR) and . Because LBLR is an indicator of the accreting power of the source in blazars, we derived a linear correlation, ∝ M˙1/3.18, which suggests that the SED of blazars may depend on the accretion rate, like that of BL Lac objects. We also found a significant correlation between ■ and for a sample of 11 blazars (out of one of 36) with available black hole masses. This implies the Eddington accretion ratio may influence the shape of the SED of blazars.     

Isolation, cloning and sequencing of AFLP markers related to disease-resistance traits in Fenneropenaeus chinensis

Amplified fragment length polymorphisms （AFLP） technique was used to analyze the fingerprinting of four successive generations of Fenneropenaeus chinensis to reveal their disease-resistance traits. Some loci showed quite different genetic frequencies due to artificial selection, which implied that these fragments were putative markers related to the disease-resistance trait. We developed a simple and effective method to further characterize these AFLP fragments. Specific AFLP bands were cut directly from polyacrylamide gels, re-amplified, cloned and sequenced. Eight putative genetic markers were sequenced and their sizes ranged from 63 to 209 bp. The sequences were submitted to dbGSS （database of Genome Sequence Survey）; and the BLAST analysis showed low similarity to the function genes, indicating these markers were tightly linked to a disease-resistance trait but were not functional genes.     

ANALYSIS OF MESOSCALE CONVECTIVE SYSTEMS OVER TIBETAN PLATEAU IN SUMMER

1INTRODUCTION In meteorological satellite cloud images, the features of Mesoscale Convective System (MCS) are shown in white bright cloud cluster, cloud band, cloud line, vorti- calcloudsystem,etc. The MCSlife cycle and spatial size usuallyvaryfrom several hours to one day and 100km to approximately 1000km, respectively. In the last two decades, it has been proven that storm and intensive con- vective weather, such as spasmodic thunderstorm and gale, tornado and short macro-precipitati…