上新世——早更新世青藏高原北缘隆升的磁性地层学证据

对新疆叶城剖面西域砾岩及下伏第三纪地层的磁性地层学研究表明 ,西域砾岩的沉积时代为晚上新世至早更新世 ,磁性地层年龄为 3.5至 <1.8Ma。阿图什组沉积于早上新世 ,古地磁年龄为 4 .6～ 3.5 Ma。阿图什组以砂岩和粉砂岩为主夹薄层砾岩 ,为河流相及冲积扇前缘相。西域砾岩以厚层砾岩为主夹风成粉砂岩 ,为典型洪积—冲积扇堆积。西域砾岩的沉积反映了青藏高原北缘晚上新世至早更新世强烈的隆起和剥蚀     

华北板块北缘东段陆缘活动带构造岩片划分及变质变形特征

1∶25万和龙市幅、汪清县幅等九幅区域地质调查成果显示,华北板块北缘东段残存着数条元古代-古生代不同时期的构造岩片,这些构造岩片均经历了强烈的变形改造及变质作用叠加,记录了增生型造山带在不同演化阶段热-动力学条件。吉林东部华北板块北缘陆缘活动带东段内元古代-古生代构造地层单位的确定,对探讨吉黑地区的大地构造演化具有重要意义。     

基于GIS的城市交通网络要素可视化表达方法研究

城市交通网络要素的可视化表达是GIS—T研究和应用领域中的一个难题,本文在对目前流行的交通网络数据模型进行系统研究的基础上,选择了动态分段技术下的结点-弧段模型,对交通网络复杂要素进行可视化表达,并对城市交通网络要素的可视化表达方法和形式进行了分析,最后结合交通网络复杂要素的可视化表达,设计和创建了具体的数据结构表和数据结构图。     

雾水的D和18O同位素研究进展

凝结水的D、¹⁸O同位素研究目前主要集中在雾水方面,露水和土壤吸附水的相关研究仍属空白。由于形成时的温度较高,大多数雾水的D、¹⁸O同位素较当地雨水富集,但不同类型雾的同位素特征存在差异。平流式海洋雾为单级的蒸发—冷凝封闭循环系统的首次凝结,D、¹⁸O同位素较当地雨水显著富集;热带云雾林中的地形雾与降雨同时发生,且水分源于同一云团,δD、δ¹⁸O值差异较小;内陆辐射雾因部分水汽源于当地水分的再循环,过量氘和δD、δ¹⁸O值高于降雨。目前有少量研究用D、¹⁸O同位素指示雾水对植被、地下水和地表径流的补给作用,但以定性分析为主,基于端元混合模型的定量评价极少。露水和土壤吸附水的稳定同位素研究是干旱区凝结水研究的重要方向;D、¹⁸O同位素与其它同位素或化学指标的结合有助于促进凝结水生态水文效应的研究进展;短间隔、高密度的长期观测和用于稳定同位素分析的凝结水采样器的设计是需要进一步开展的工作。     

矿集区预测中的探索式空间分析方法及应用——以中亚铜矿集区预测为例

随着地理信息科学和计算机技术的发展,计算环境下矿集区预测方法的研究热潮也初现端倪.依据矿集区所包含的理论内涵(矿床密集区、潜力密集区的聚集内涵),提出了应用探索式空间分析法进行矿集区预测的设想,并以北至科克舍套,南至帕米尔高原,西至乌拉尔山,东至新疆边境的中亚区域为研究区,利用探索式空间分析方法从含矿潜力的确定及其空间分布模式的探索入手,对研究区铜矿集区进行了预测,初步圈定了乌拉尔、矿区阿尔泰、北滨巴尔喀什、斋桑、塔尔巴合台等17处铜矿集区.研究成果除包含了研究区已知矿集区外,还有7处新区,反映了探索式空间分析法在矿集区预测中的应用潜力.     

灌注桩钢筋笼内部的磁异常特征

通过分析有限长直立圆柱体内部的磁异常特征,结合模型桩试验,研究了灌注桩钢筋笼内部的磁异常特征,结果表明在钢筋笼内部钻孔中的磁异常Za 垂直分量总体上呈现"两峰夹一谷"的特征,钢筋笼中部呈宽缓的马鞍形负异常,钢筋笼底端位置对应磁异常从极小值转变为极大值的拐点,相应梯度曲线出现极大值.     

利用钻芯孔检测灌注桩钢筋笼长度的方法

根据充电法原理,结合模型桩试验,分析了钢筋笼周围的充电电场特征,结果表明钢筋笼的底端对应于电位梯度曲线的极小值点及电位曲线的拐点。以此研究结果为基础,提出了利用钻芯孔来检测成桩后钢筋笼长度的方法。某桥的应用表明,该方法简便、实用、可靠。     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.