New developments in water efficiency

1Water LossInitiativesUnaccounted-for water(or unbilled water)has beenreceiving newscrutiny at both the state and nationallevels.For years,water conservationeffortsin Europehave emphasized reduction in water loss to a muchgreater extent thaninthe United S…     

A comparative study of the modelling of cement hydration and cement-rock laboratory experiments

The use of cement and concrete as fracture grouting or as tunnel seals in a geological disposal facility for radioactive wastes creates potential issues concerning chemical reactivity. From a long-term safety perspective, it is desirable to be able model these interactions and changes quantitatively. The ‘Long-term Cement Studies’ (LCS) project was formulated with an emphasis on in situ field experiments with more realistic boundary conditions and longer time scales compared with former experiments. As part of the project programme, a modelling inter-comparison has been conducted, involving the modelling of two experiments describing cement hydration on one hand and cement-rock reaction on the other, with teams representing the NDA (UK), Posiva (Finland), and JAEA (Japan).This modelling exercise showed that the dominant reaction pathways in the two experiments are fairly well understood and are consistent between the different modelling teams, although significant differences existed amongst the precise parameterisation (e.g. reactive surface areas, dependences of rate upon pH, types of secondary minerals), and in some instances, processes (e.g. partition of alkali elements between solids and liquid during cement hydration; kinetic models of cement hydration). It was not conclusive if certain processes such as surface complexation (preferred by some modellers, but not by others) played a role in the cement-rock experiment or not. These processes appear to be more relevant at early times in the experiment and the evolution at longer timescales was not affected. The observed permeability profile with time could not be matched. The fact that no secondary minerals could be observed and that the precipitated mass calculated during the simulations is minor might suggest that the permeability reduction does not have a chemical origin, although a small amount of precipitates at pore throats could have a large impact on permeability.The modelling exercises showed that there is an interest in keeping the numerical models as simple as possible and trying to obtain a reasonable fit with a minimum of processes, minerals and parameters. However, up-scaling processes and model parameterisation to the timescales appropriate to repository safety assessment are of considerable concern. Future modelling exercises of this type should focus on a suitable natural or industrial analogue that might aid assessing mineral-fluid reactions at these longer timescales.     

The effect of El Niño Southern Oscillation cycles on the decadal scale suspended sediment behavior of a coastal dry‐summer subtropical catchment

Rivers display temporal dependence in suspended sediment–water discharge relationships. Although most work has focused on multi‐decadal trends, river sediment behavior often displays sub‐decadal scale fluctuations that have received little attention. The objectives of this study were to identify inter‐annual to decadal scale fluctuations in the suspended sediment–discharge relationship of a dry‐summer subtropical river, infer the mechanisms behind these fluctuations, and examine the role of El Niño Southern Oscillation climate cycles. The Salinas River (California) is a moderate sized (11 000 km²), coastal dry‐summer subtropical catchment with a mean discharge (Q_mean) of 11.6 m³ s^?1. This watershed is located at the northern most extent of the Pacific coastal North America region that experiences increased storm frequency during El Niño years. Event to inter‐annual scale suspended sediment behavior in this system was known to be influenced by antecedent hydrologic conditions, whereby previous hydrologic activity regulates the suspended sediment concentration–water discharge relationship. Fine and sand suspended sediment in the lower Salinas River exhibited persistent, decadal scale periods of positive and negative discharge corrected concentrations. The decadal scale variability in suspended sediment behavior was influenced by inter‐annual to decadal scale fluctuations in hydrologic characteristics, including: elapsed time since small (~0.1 × Q_mean), and moderate (~10 × Q_mean) threshold discharge values, the number of preceding days that low/no flow occurred, and annual water yield. El Niño climatic activity was found to have little effect on decadal‐scale fluctuations in the fine suspended sediment–discharge relationship due to low or no effect on the frequency of moderate to low discharge magnitudes, annual precipitation, and water yield. However, sand concentrations generally increased in El Niño years due to the increased frequency of moderate to high magnitude discharge events, which generally increase sand supply. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydropyrolysis: A new technique for the analysis of macromolecular material in meteorites

The carbonaceous chondrite meteorites are fragments of asteroids that have remained relatively unprocessed since the formation of the Solar System 4.56 billion years ago. The major organic component in these meteorites is a macromolecular phase that is resistant to solvent extraction. The information contained within macromolecular material can be accessed by degradative techniques such as pyrolysis. Hydropyrolysis refers to pyrolysis assisted by high hydrogen gas pressures and a dispersed sulphided molybdenum catalyst. Hydropyrolysis of the Murchison macromolecular material successfully releases much greater quantities of hydrocarbons than traditional pyrolysis techniques (twofold greater than hydrous pyrolysis) including significant amounts of high molecular weight polyaromatic hydrocarbons (PAH) such as phenanthrene, carbazole, fluoranthene, pyrene, chrysene, perylene, benzoperylene and coronene units with varying degrees of alkylation. When hydropyrolysis products are collected using a silica trap immersed in liquid nitrogen, the technique enables the solubilisation and retention of compounds with a wide range of volatilities (i.e. benzene to coronene). This report describes the hydropyrolysis method and the information it can provide about meteorite macromolecular material constitution.     

A quadratic variation indirect boundary element method for traction boundary-value problems of two-dimensional elastostatics

Boundary integral equations for traction boundary-value problems of two-dimensional elastostatics are derived by the indirect boundary element method. Quadratic variation functions for the representation of geometry, fictitious forces and displacements over each boundary element are described. A system of equations approximating to the boundary integral equations is obtained by a Galerkin formulation in which the integral equation is written at Gauss integration points of elements. The method of computation of the Cauchy principal value is described. Examples of application to the analysis of stress and displacement around underground excavations demonstrate the accuracy and efficiency of the formulation.     

Spatial and seasonal variations in the chemistry of sediment interstitial waters in the Tamar Estuary

Chemical concentration gradients in the interstitial waters of shallow (0–10 cm), reducing sediments are reported for four stations in the Tamar Estuary over a two-year period. The products of organic matter breakdown, sedimentary redox changes and diagenetic reactions have been determined and a multicomponent analytical approach has enabled the interactions of complementary processes to be examined. While many components show spatial and seasonal patterns related to the supply of organic matter and salinity associated sulphate distribution, the effects of temperature, sediment disturbance and river flow are also apparent.Sediment stored prior to the separation of interstitial water showed significant changes in chemical composition compared to samples processed within 24 h of collection.     

Magnesium isotope fractionation in silicate melts by chemical and thermal diffusion

Two types of laboratory experiments were used to quantify magnesium isotopic fractionations associated with chemical and thermal (Soret) diffusion in silicate liquids. Chemical diffusion couples juxtaposing a molten natural basalt (SUNY MORB) and a molten natural rhyolite (Lake County Obsidian) were run in a piston cylinder apparatus and used to determine the isotopic fractionation of magnesium as it diffused from molten basalt to molten rhyolite. The thermal diffusion experiments were also run in a piston cylinder apparatus but with a sample made entirely of molten SUNY MORB displaced from the hotspot of the assembly furnace so that the sample would have a temperature difference of about 100-200 °C from one end to the other. The chemical diffusion experiments showed fractionations of ²⁶Mg/²⁴Mg by as much as 7‰, which resulted in an estimate for the mass dependence of the self-diffusion coefficients of the magnesium isotopes corresponding to D_26Mg/D_24Mg=(24/26)^β with β = 0.05. The thermal diffusion experiments showed that a temperature difference of about 100 °C resulted in the MgO, CaO, and FeO components of the basalt becoming slightly enriched by about 1 wt% in the colder end while SiO₂ was enriched by several wt% in the hotter end. The temperature gradient also fractionated the magnesium isotopes. A temperature difference of about 150 °C produced an 8‰ enrichment of ²⁶Mg/²⁴Mg at the colder end relative to the hotter end. The magnesium isotopic fractionation as a function of temperature in molten basalt corresponds to 3.6 × 10⁻²‰/°C/amu.     

Remote leveling of tide gauges using GNSS reflectometry: case study at Spring Bay,Australia

We further developed a new approach using GNSS reflectometry to determine the leveling connection between a tide gauge and a GNSS antenna. This approach includes the optimization of the unknown receiver bandwidth and the estimation of frequency changes in the signal-to-noise ratio (SNR) oscillation through an extended Kalman filter/smoother algorithm. We also corrected the geometric bending of the GNSS signals due to tropospheric refraction using local meteorological observations. Using 3 weeks of SNR data in Spring Bay, Australia, from a GNSS antenna placed sideways (i.e., ground plane orientated vertically and directed in azimuth toward the sea surface) to improve the SNR interference near the horizon, we obtained mean leveling differences of approximately 5 mm, with an RMS of approximately 3 cm level with respect to the nominal leveling from classical surveying techniques. SNR data from three different receiver manufacturers, coupled to the same antenna, provided similar leveling results. With a second antenna in the usual upright configuration, we obtained mean leveling differences of 1–2 cm and a RMS of about 10 cm. In the upright configuration, the leveling differences may include errors in the GNSS antenna phase center calibration, which are avoided in our technique but not in the classical surveying techniques. These results demonstrate the usefulness of the reflectometry technique to obtain precisely and remotely the leveling between a GNSS antenna and a tide gauge. In addition, this technique can be applied continuously, providing an independent and economical means to monitor the stability of the tide gauge zero.