Microbial mass-dependent fractionation of chromium isotopes

Mass-dependent fractionation of Cr isotopes occurs during dissimilatory Cr(VI) reduction by Shewanella oneidensis strain MR-1. Cells suspended in a simple buffer solution, with various concentrations of lactate or formate added as electron donor, reduced 5 or 10 μM Cr(VI) to Cr(III) over days to weeks. In all nine batch experiments, ⁵³Cr/⁵²Cr ratios of the unreacted Cr(VI) increased as reduction proceeded. In eight experiments covering a range of added donor concentrations up to 100 μM, isotopic fractionation factors were nearly invariant, ranging from 1.0040 to 1.0045, with a mean value somewhat larger than that previously reported for abiotic Cr(VI) reduction (1.0034). One experiment containing much greater donor concentration (10 mM lactate) reduced Cr(VI) much faster and exhibited a lesser fractionation factor (1.0018). These results indicate that ⁵³Cr/⁵²Cr measurements should be effective as indicators of Cr(VI) reduction, either bacterial or abiotic. However, variability in the fractionation factor is poorly constrained and should be studied for a variety of microbial and abiotic reduction pathways.     

Calcite precipitation instability under laminar, open-channel flow

We present a 2D numerical model for the growth of calcite from supersaturated aqueous solutions under laminar, open-channel flow conditions. The model couples solution chemistry, precipitation at solution/calcite interfaces, hydrodynamics, diffusion and degassing. The model output is compared with experimental results obtained using an oversaturated calcite solution produced by mixing CaCl₂ and Na₂CO₃. The precipitation rate is observed to increase when the supersaturated solution flows over an obstruction, leading to a growth instability that causes the formation of terraces. At relatively high flow rates, the most important mechanism for this behaviour seems to be hydrodynamic advection of dissolved species either towards or away from the calcite surface, depending on location relative to the obstruction, which deforms the concentration gradients. At lower flow rates, steepening of diffusion gradients around protrusions becomes important. Enhanced degassing over the obstruction due to shallowing and pressure drop is not important on small scales. Diffusion controlled transport close to the calcite surface can lead to a fingering-type growth instability, which generates porous textures. Our results are consistent with existing diffusive boundary layer theory, but for flow over non-smooth surfaces, simple calcite precipitation models that include empirical correlations between fluid flow rate and calcite precipitation rate are inaccurate.     

Large and giant hydrocarbon accumulations in the transitional continent-ocean zone

The petroleum resource potential is considered for the Atlantic, West Pacific, and East Pacific types of deepwater continental margins. The most considerable energy resources are concentrated at the Atlantic-type passive margins in the zone transitional to the ocean. The less studied continental slope of backarc seas of the generally active margins of the West Pacific type is currently not so rich in discoveries as the Atlantic-type margin, but is not devoid of certain expectations. In some of their parameters, the margins bounded by continental slopes may be regarded as analogs of classical passive margins. At the margins of the East Pacific type, the petroleum potential is solely confined to transform segments. In the shelf-continental-slope basins of the rift and pull-apart nature, petroleum fields occur largely in the upper fan complex, and to a lesser extent in the lower graben (rift) complex. In light of world experience, the shelf-continental-slope basins of the Arctic and Pacific margins of Russia are evaluated as highly promising.     

Opacitization conditions of hornblende in Bezymyannyi volcano andesites (March 30, 1956 eruption)

The paper is devoted to the conditions under which opacite rims developed around hornblende grains in andesite of the catastrophic eruption (March 30, 1956) of Bezymyannyi volcano, Kamchatka. The opacite rims were produced by a bimetasomatic reaction between hornblende and melt with the development of the following zoning: hornblende → Px + Pl + Ti-Mag → Px + Pl → Px → melt. Biometasomatic reaction was accompanied by the active removal of CaO from the rim, addition of SiO₂, and more complicated behavior of other components. The hornblende also shows reactions of its volumetric decomposition under near-isochemical conditions. The opacite rims developed under isobaric conditions, at a pressure of approximately 6 kbar. The main reason for the instability of the hornblende was the heating of the magma chamber from 890 to 1005°C due to new hot magma portion injection. The time interval between the injection and the start of eruption was estimated from the thickness of the opacite rims and did not exceed 37 days. Hence, the March 30, 1956, eruption was not related to the volcanic activity in November of 1955 but to the injection of a fresh magma portion in February–March of 1956.     

The presence of anomalous trace element levels in present day Jamaican soils and the geochemistry of Late-Miocene or Pliocene phosphorites

High levels of Cd and Zn in Jamaican soils observed in geochemical surveys are related to the presence of phosphorites of possible Late-Miocene or Pliocene age. The trace element and REE geochemistry of the phosphorites, together with SEM studies, indicate a guano origin for the phosphorites. No specific host minerals for Cd could be identified in the fossiliferous phosphorite which is characterized by uniquely high levels of Cd, Zn, Ag, Be, U and Y. However, in the soil Cd is present in lithiophorite and a complex history of pedological development is preserved in the aluminous–goethite present in the soil. The unique guano signature is preserved in the soil despite the fact that guanos themselves have either not been observed or have been destroyed by continuing karst and soil development. The phosphorite geochemical signature can be traced in the data of a 1988 island-wide soil geochemical survey, identifying areas where the Palaeo-environment that supported bird ‘rookeries’ existed in the Late-Miocene or Pliocene.     

The hydrochemistry of a semi-arid pan basin case study: Sua Pan,Makgadikgadi, Botswana

This study presents results on the fluid and salt chemistry for the Makgadikgadi, a substantial continental basin in the semi-arid Kalahari. The aims of the study are to improve understanding of the hydrology of such a system and to identify the sources of the solutes and the controls on their cycling within pans. Sampling took place against the backdrop of unusually severe flooding as well as significant anthropogenic extraction of subsurface brines. This paper examines in particular the relationship between the chemistry of soil leachates, fresh stream water, salty lake water, surface salts and subsurface brines at Sua Pan, Botswana with the aim of improving the understanding of the system’s hydrology. Occasionally during the short wet season (December–March) surface water enters the saline environment and precipitates mostly calcite and halite, as well as dolomite and traces of other salts associated with the desiccation of the lake. The hypersaline subsurface brine (up to TDS 190,000 mg/L) is homogenous with minor variations due to pumping by BotAsh mine (Botswana Ash (Pty) Ltd.), which extracts 2400 m³ of brine/h from a depth of 38 m. Notable is the decrease in TDS as the pumping rate increases which may be indicative of subsurface recharge by less saline water. Isotope chemistry for Sr (⁸⁷Sr/⁸⁶Sr average 0.722087) and S (δ³⁴S average 34.35) suggests subsurface brines have been subject to a lithological contribution of undetermined origin. Recharge of the subsurface brine from surface water including the Nata River appears to be negligible.     

National-scale estimation of potentially harmful element ambient background concentrations in topsoil using parent material classified soil:stream–sediment relationships

Regulatory authorities require estimates of ambient background concentrations (ABCs) of potentially harmful elements (PHEs) in topsoil; such data are currently not available in many countries. High resolution soil geochemical data exist for only part of England and Wales, whilst stream sediment data cover the entire landscape. A novel methodology is presented for estimating soil equivalent ABCs for PHEs from high-resolution (HR) stream sediment geochemical data grouped by common parent materials (PM), using arsenic (As) as an example. Geometric mean (GM) values for local PM groups are used to investigate different approaches for transforming sediment to soil equivalent concentrations. Holdout validation is used to assess: (i) the optimum number of samples for calculating local GM values, and (ii) the optimum scale at which to group data when using linear regression analysis to estimate GM soil ABCs from local sediment geochemical values. Holdout validation showed that the smallest differences were generally observed when five observations were used to calculate the GM and that these should be grouped over the smallest possible area in order to encompass soils over PMs with elevated GM As concentrations. Geometric mean ABCs are estimated and mapped for As in mineral soil across all of England and Wales within delineations of PM polygons. Errors for the estimation of soil equivalent GM As ABCs based on sediment data for an independent validation set were of a similar magnitude to those from holdout validation applied to the original data suggesting the approach is robust. The estimates of soil equivalent ABCs suggest that As exceeds the regulatory threshold used in risk assessments for residential land use (20 mg kg⁻¹) across 16% of the landscape of England and Wales. The applicability of the method for cognate landscapes, and potential refinements is discussed.     

First U–Pb SHRIMP age of the Hauterivian stage, Neuquén Basin, Argentina

A high-resolution ion-microprobe (SHRIMP) U–Pb zircon age from a tuff layer intercalated in the ammonoid bearing sedimentary succession of the Neuquén Basin in Argentina provides a robust geochronologic date to add to the absolute ages and to improve the relative chronology of the Early Cretaceous Hauterivian stage. The tuff layer appears interbedded between shales of the upper member (Agua de la Mula) of the Agrio Formation within the Spitidiscus riccardii ammonoid zone (base of the Late Hauterivian) yielding a date of 132.5 ± 1.3 Ma. This date confirms and supports an accurate correlation between the ammonoid biostratigraphy of the Neuquén Basin with the Western Mediterranean Province of the Tethys during the Early Cretaceous and matches with the most recently published time scale. It also casts doubts on the validity of K–Ar ages on glauconite-grains recently reported from the Lower Cretaceous of the Vocontian Basin of France.     

Si diffusion in zircon

Self-diffusion of Si under anhydrous conditions at 1 atm has been measured in natural zircon. The source of diffusant for experiments was a mixture of ZrO₂ and ³⁰Si-enriched SiO₂ in 1:1 molar proportions; experiments were run in crimped Pt capsules in 1-atm furnaces. ³⁰Si profiles were measured with both Rutherford backscattering spectrometry (RBS) and nuclear reaction analysis with the resonant nuclear reaction ³⁰Si(p,γ)³¹P. For Si diffusion normal to c over the temperature range 1,350–1,550°C, we obtain an Arrhenius relation D = 5.8 exp(−702 ± 54 kJ mol⁻¹/RT) m² s⁻¹ for the NRA measurements, which agrees within uncertainty with an Arrhenius relation determined from the RBS measurements [62 exp(−738 ± 61 kJ mol⁻¹/RT) m² s⁻¹]. Diffusion of Si parallel to c appears slightly faster, but agrees within experimental uncertainty at most temperatures with diffusivities for Si normal to c. Diffusion of Si in zircon is similar to that of Ti, but about an order of magnitude faster than diffusion of Hf and two orders of magnitude faster than diffusion of U and Th. Si diffusion is, however, many orders of magnitude slower than oxygen diffusion under both dry and hydrothermal conditions, with the difference increasing with decreasing temperature because of the larger activation energy for Si diffusion. If we consider Hf as a proxy for Zr, given its similar charge and size, we can rank the diffusivities of the major constituents in zircon as follows: D _Zr < D _Si << D _{O, dry} < D _{O, ‘wet’}.