Anomalous Behavior of the Linear Polarization of the Herbig Ae Star WW Vul during the 1997 Minimum

In the course of photopolarimetric monitoring of the Herbig Ae star WW Vul, an unusual variation of linear polarization upon energence from a deep minimum was recorded, which cannot be explained by the standard mechanism for such objects (UX Ori stars): a variable contribution of radiation scattered by circumstellar dust. An analysis of possible causes of the anomalous behavior of polarization shows that it was most likely due to the presence of aligned, aspherical dust grains in the dust cloud crossing the line of sight at that time.     

Inverse Analysis of Deep Excavation Using Differential Evolution Algorithm

This paper presents the applications of the differential evolution (DE) algorithm in back analysis of soil parameters for deep excavation problems. A computer code, named Python‐based DE, is developed and incorporated into the commercial finite element software ABAQUS, with a parallel computing technique to run an FE analysis for all trail vectors of one generation in DE in multiple cores of a cluster, which dramatically reduces the computational time. A synthetic case and a well‐instrumented real case, that is, the Taipei National Enterprise Center (TNEC) project, are used to demonstrate the capability of the proposed back‐analysis procedure. Results show that multiple soil parameters are well identified by back analysis using a DE optimization algorithm for highly nonlinear problems. For the synthetic excavation case, the back‐analyzed parameters are basically identical to the input parameters that are used to generate synthetic response of wall deflection. For the TNEC case with a total of nine parameters to be back analyzed, the relative errors of wall deflection for the last three stages are 2.2, 1.1, and 1.0%, respectively. Robustness of the back‐estimated parameters is further illustrated by a forward prediction. The wall deflection in the subsequent stages can be satisfactorily predicted using the back‐analyzed soil parameters at early stages. Copyright © 2014 John Wiley & Sons, Ltd.     

The biogeochemical sulfur cycle in the marine boundary layer over the Northeast Pacific Ocean

The major components of the marine boundary layer biogeochemical sulfur cycle were measured simultaneously onshore and off the coast of Washington State, U.S.A. during May 1987. Seawater dimethylsulfide (DMS) concentrations on the continental shelf were strongly influenced by coastal upwelling. Concentration further offshore were typical of summer values (2.2 nmol/L) at this latitude. Although seawater DMS concentrations were high on the biologically productive continental shelf (2–12 nmol/L), this region had no measurable effect on atmospheric DMS concentrations. Atmospheric DMS concentrations (0.1–12 nmol/m³), however, were extremely dependent upon wind speed and boundary layer height. Although there appeared to be an appreciable input of non-sea-salt sulfate to the marine boundary layer from the free troposphere, the local flux of DMS from the ocean to the atmosphere was sufficient to balance the remainder of the sulfur budget.     

Estimation of the effect of protective piers on wind wave parameters in the Sevastopol Bay

An effectiveness of the storm wave attenuation by protective piers in the Sevastopol Bay of the Black Sea is studied on the basis of numerical simulation using the SWAN spectral model. Analyzed are the parameters of waves generated by winds of four main directions as well as by the southern cyclone during the storm on November 11, 2007. It is obtained that waves from the northwest part of the Black Sea penetrate most intensively into the Sevastopol Bay in case of western wind and, to a lesser degree, in case of northern and southern winds. A protective effect of the piers is observed in the west part of the bay only and the wave attenuation near the southern coast is more significant than near the northern one. The area of the southern coast directly behind the southern pier is completely protected from the storm waves and, as moving away from the pier, the danger of intensive wave effect on the coast is kept.     

Modelling of local velocity anomalies: a cookbook

The determination of small-scale velocity anomalies (from tens to a few hundreds of metres) is a major problem in seismic exploration. The impact of such anomalies on a structural interpretation can be dramatic and conventional techniques such as tomographic inversion or migration velocity analysis are powerless to resolve the ambiguity between structural and velocity origins of anomalies. We propose an alternative approach based on stochastic modelling of numerous anomalies until a set of models is found which can explain the real data. This technique attempts to include as much a priori geological information as possible. It aims at providing the interpreter with a set of velocity anomalies which could possibly be responsible for the structural response. The interpreter can then choose one or several preferred models and pursue a more sophisticated analysis. The class of retained models are all equivalent in terms of data and therefore represent the uncertainty in the model space. The procedure emulates the real processing sequence using a simplified scheme. Essentially, the technique consists of five steps: 1 Interpretation of a structural anomaly in terms of a velocity anomaly with its possible variations in terms of position, size and amplitude. 2 Drawing a model by choosing the parameters of the anomaly within the acceptable range. 3 Modelling the traveltimes in this model and producing the imaging of the reflected interface. 4 Comparing the synthetic data with the real data and keeping the model if it lies within the data uncertainty range. 5 Iterate from step 2. In order to avoid the high computational cost inherent in using statistical determinations, simplistic assumptions have been made: ? The anomaly is embedded in a homogeneous medium: we assume that the refraction and the time shift due to the anomaly have a first-order effect compared with ray bending in the intermediate layers. ? We model only the zero-offset rays and therefore we restrict ourselves to structural problems. ? We simulate time migration and so address only models of limited structural complexity. These approximations are justified in a synthetic model which includes strong lateral velocity variations, by comparing the result of a full processing sequence (prestack modelling, stack and depth migration) with the simplified processing. This model is then used in a blind test on the inversion scheme.     

Coupled changes in sand grain size and sand transport driven by changes in the upstream supply of sand in the Colorado River: Relative importance of changes in bed-sand grain size and bed-sand area

Sand transport in the Colorado River in Marble and Grand canyons was naturally limited by the upstream supply of sand. Prior to the 1963 closure of Glen Canyon Dam, the river exhibited the following four effects of sand supply limitation: (1) hysteresis in sediment concentration, (2) hysteresis in sediment grain size coupled to the hysteresis in sediment concentration, (3) production of inversely graded flood deposits, and (4) development or modification of a lag between the time of a flood peak and the time of either maximum or minimum (depending on reach geometry) bed elevation. Construction and operation of the dam has enhanced the degree to which the first two of these four effects are evident, and has not affected the degree to which the last two effects of sand supply limitation are evident in the Colorado River in Marble and Grand canyons. The first three of the effects involve coupled changes in suspended-sand concentration and grain size that are controlled by changes in the upstream supply of sand. During tributary floods, sand on the bed of the Colorado River fines; this causes the suspended sand to fine and the suspended-sand concentration to increase, even when the discharge of water remains constant. Subsequently, the bed is winnowed of finer sand, the suspended sand coarsens, and the suspended-sand concentration decreases independently of discharge. Also associated with these changes in sand supply are changes in the fraction of the bed that is covered by sand. Thus, suspended-sand concentration in the Colorado River is likely regulated by both changes in the bed-sand grain size and changes in the bed-sand area. A physically based flow and suspended-sediment transport model is developed, tested, and applied to data from the Colorado River to evaluate the relative importance of changes in the bed-sand grain size and changes in the bed-sand area in regulating suspended-sand concentration. Although the model was developed using approximations for steady, uniform flow, and other simplifications that are not met in the Colorado River, the results nevertheless support the idea that changes in bed-sand grain size are much more important than changes in bed-sand area in regulating the concentration of suspended sand.     

Intraplate deformation and 3D rheological structure of the Rhine Rift System and adjacent areas of the northern Alpine foreland

The lithosphere of the Northern Alpine foreland has undergone a polyphase evolution during which interacting stress-induced intraplate deformation and upper mantle thermal perturbations controlled folding of the thermally weakened lithosphere. In this paper we address relationships among deeper lithospheric processes, neotectonics and surface processes in the Northern Alpine foreland with special emphasis on tectonically induced topography. We focus on lithosphere memory and neotectonics, paying special attention to the thermo-mechanical structure of the Rhine Graben System and adjacent areas of the northern Alpine foreland lithosphere. We discuss implications for mechanisms of large-scale intraplate deformation and links with surface processes and topography evolution.     

Observational estimation of heat budgets on drifting ice and open water over the Arctic Ocean

It is of major scientific interests to determine the parameters of momentum, heat and vapor exchange in the planetary boundary layer in order to study the effects of ocean-ice-atmosphere interactions and their feedback mechanisms on global climate[1]. Lin…     

Mesoscale and macroscale aspects of the morning Urban Heat Island around Athens,Greece

Summary This paper examines the characteristics of the morning Urban Heat Island (UHI) in Athens basin, Greece. The study is performed by using and analyzing mesoscale and synoptic data covering the period 1990–2001. The UHI was estimated using the 0600 Local Time (LT) minimum temperature differences between rural and urban areas of the city. The analysis results in 7 UHI classes. A strong UHI was found for the 1/3 of days. The specific meteorological characteristics (surface and upper air, cooling rate) of each UHI class were revealed and examined. The spatial and temporal characteristics of the UHI were also identified. The UHI is largest on nights with clear skies and low relative humidity. In all seasons the UHI switches on rapidly in afternoon. During spring and summer, sea breeze commonly reduces and delays the UHI. Cases documenting the sensitivity and rapidity of changes of the UHI to changes in classes (cloud cover, wind) are also presented. The cooling rate is higher in the urban area under negative and lower under positive UHI conditions. Mesoscale and macroscale phenomena were examined during the different UHI classes through a weather type scheme. It was emerged that high UHI classes are associated with anticyclonic conditions or advection in the lower troposphere, while low UHI classes are associated with strong northeasterly winds. Anticyclonic conditions which frequently occur in spring and early summer, reduce or reverse the UHI to Urban Cooling Island.     

Helical structures around quiescent solar prominences computed from observable magnetic fields

We analyse the magnetic support of solar prominences in two-dimensional linear force-free fields. A line current is added to model a helical configuration, well suited to trap dense plasma in its bottom part. The prominence is modeled as a vertical mass-loaded current sheet in equilibrium between gravity and magnetic forces.We use a finite difference numerical technique which incorporates both vertical photospheric and horizontal prominence magnetic field measurements. The solution of this mixed boundary problem generally presents singularities at both the bottom and top of the model prominence. The removal of the singularities is achieved by superposition of solutions. Together with the line current equilibrium, these three conditions determine the amplitude of the magnetic field in the prominence, the flux below the prominence and the current intensity, for a given height of the line current. A numerical check of accuracy in the removal of singularities, is done by using known analytical solutions in the potential limit.We have investigated both bipolar and quadrupolar photospheric regions. In this mixed boundary problem the polarity of the field component orthogonal to the prominence is mainly fixed by the imposed height of the line current. For bipolar regions above (respectively below) a critical height the configuration is inverse (respectively normal). For quadrupolar regions the polarity is reversed if we refer the prominence polarity to the closest photospheric polarities. We introduce the polarity of the component parallel to the prominence axis with reference to a sheared arcade. Increasing the shear with fixed boundary conditions can increase or decrease the mass supported depending on the configuration.