Microstructurally controlled trace element (Zr,U–Pb) concentrations in metamorphic rutile: An example from the amphibolites of the Bergen Arcs

As a common constituent of metamorphic assemblages, rutile provides constraints on the timing and conditions of rock transformation at high resolution. However, very little is known about the links between trace element mobility and rutile microstructures that result from synmetamorphic deformation. To address this issue, here we combine in situ LA-ICP-MS and sensitive high-resolution ion microprobe trace element data with electron back-scatter diffraction microstructural analyses to investigate the links between rutile lattice distortions and Zr and U–Pb systematics. Furthermore, we apply this integrated approach to constrain further the temperature and timing of amphibolite facies metamorphism and deformation in the Bergen Arcs of southwestern Norway. In outcrop, the formation of porphyroblastic rutile in dynamically hydrated leucocratic domains of otherwise rutile-poor statically hydrated amphibolite provides key contextual information on both the ambient conditions of hydration and deformation and the composition of the reactive fluid. Rutile in amphibolite recorded ambient metamorphic temperatures of ~590–730°C during static hydration of the granulitic precursor. By contrast, rutile from leucocratic domains in the directly adjacent shear zone indicates that deformation was accompanied by a localized increase in temperature. These higher temperatures are recorded in strain-free rutile (~600–860°C) and by Zr concentration measurements on low-angle boundaries and shear bands (620–820°C). In addition, we also observe slight depletions of Zr and U along rutile low-angle boundaries relative to strain-free areas in deformed grains from the shear zone. This indicates that crystal–plastic deformation facilitated the compositional re-equilibration of rutile upon cooling to slightly below the peak temperature of deformation. Cessation of deformation at mid-crustal conditions near ~600°C is recorded by late stage growth of small (<150 µm) rutile in the high-strain zones. U–Pb age data obtained from the strain-free and distorted rutile grains cluster in distinct populations of 437.4 ± 2.7 Ma and c. 405–410 Ma, respectively. These different ages are interpreted to reflect the difference in closure for thermally induced Pb diffusion between undeformed and deformed rutile during post-deformation exhumation and cooling. Thus, our results provide a reconstruction of the thermochronological history of the amphibolite facies rocks of the Lindås Nappe and highlight the importance of integration of microstructural data during application of thermometers and geochronometers.     

Potential evidence for slab detachment from the flexural backstripping of a foredeep: Insight on the evolution of the Pescara basin (Italy)

The discrepancy between the size of the Apenninic chain and the depth of the Adriatic foredeep is investigated using 2D flexural backstripping on well‐constrained depth‐converted cross‐sections in the Pescara basin (Central Italy). The procedure consisted of removal, uplift, unfolding and unfaulting of the Pliocene–Pleistocene foreland deposits to produce a palaeogeographic map of the basin at the end of the Messinian and to constrain sedimentary rates since the Miocene. Results are found to support the contribution of an external load to the foreland evolution together with the Apenninic chain load. The interplay of the two types of loads resulted in spatial and temporal variations of the foredeep evolution that are quantified by palaeogeographic maps and sedimentation rates obtained through backstripping. Results are interpreted as representing the effects of a southward‐migrating wave linked to slab detachment beneath the Adriatic foredeep. This procedure can be useful to investigate similar problems on other chains worldwide.     

Limestone Provenance in Roman Lime‐Volcanic Ash Mortars from the Villa dei Quintili,Rome

Roman mortars were collected from the Villa dei Quintili in Rome, an archaeological site consisting of numerous edifices from nine construction phases dating from the 2nd century A.D. to modern times. A multianalytical approach was used on 34 mortar samples to infer the evolution of production techniques over time and to identify the source area of calcareous raw materials used in the preparation of the lime. Optical microscopy, scanning electron microscopy coupled with an energy‐dispersive system, and laser ablation inductively coupled plasma mass spectrometry were used to study the samples. The major and trace element data were compared with the compositions of two types of limestone samples (Calcare Massiccio and Calcare Maiolica) collected from the Cornicolani Mountains. The results suggest that the technological practices and the calcareous raw materials used for lime production remained unchanged over the time period considered (2nd century A.D. to 3rd century A.D.). The compositions of lime‐related particles in the mortars match those of Calcare Maiolica, which suggests its use as raw material for lime production. On the whole, the results are in agreement with data from existing literature regarding both the use by Roman builders of specific raw materials for the mortars’ production and the relative supply area.     

Organic matter recycling during a mucilage event and its influence on the surrounding environment (Ligurian Sea, NW Mediterranean)

The development of benthic mucilage in the Marine Protected Area of Portofino (Ligurian Sea) during the summer of 2009 was studied to verify the influence of this event on the surrounding environment (seawater and soft-bottom). The calm meteorological and sea conditions at the beginning of the time frame under consideration caused the thermal stratification of the water column. This stratification was one of the driving factors influencing the development of the mucilage, which developed on a large boulder surface above the pycnocline. Mucilage was progressively detached from the boulder surface by hydrodynamism, together with macroalgae, and sank onto the sediment below the thermocline. Increased surface-water movements, caused by meteorological forcing during the study period, influenced the aggregation-disaggregation of mucilage flocks above the thermocline, leading to increased dissolved oxygen concentrations and enhanced production and turnover of the organic matter (OM). Mixing with the adjacent seawater led to the fertilisation of the surrounding environment with potentially labile OM and inorganic phosphorus, which caused increases in the hydrolytic enzymatic activity. Conversely, below the thermocline, the sunken mucilage and algae aggregates supported a heterotrophic consumption system. Dissolved oxygen concentrations were lower than those recorded in the mucilage lying above the thermocline, making more carbohydrates than proteins and labile phosphorus available. Despite the slow oxygenation of this mucilage, it contributed to the food supply for the soft-bottom macrofauna, which showed an increase in density, diversity and biomass during the study. These results suggest that the development and fate of the mucilage, as well as its interactions with the surrounding environment, were principally regulated by physical features. In the oligotrophic coastal area of the Ligurian Sea, certain compartments of the ecosystem were able to promptly respond and take advantage of the mucilage event of the summer of 2009, although the persistence of mucilage on hard substrates is known to cause suffocation and macroalgae biomass depletion. It is proposed that, at least in oligotrophic conditions and as long as mucilage persistence doesn't cause severe oxygen depletion, its appearance might have an enhancing rather than a detrimental effect on the seawater and soft-bottom biogeochemical processes.     

SWASV speciation of Cd, Pb and Cu for the determination of seawater contamination in the area of the Nicole shipwreck (Ancona coast, Central Adriatic Sea)

The study reports for the first time on the heavy metal contamination of the waters surrounding a shipwreck lying on the sea floor. Square wave anodic stripping voltammetry has been used for a survey of the total and dissolved Cd, Pb and Cu contents of the seawater at the site of the sinking of the Nicole M/V (Coastal Adriatic Sea, Italy). Results show that the hulk has a considerable impact as regards all three metals in the bottom water, especially for the particulate fraction concentrations, which increased by factors of ∼9 (Cd), ∼3 (Pb) and ∼5 (Cu). The contaminated plume extended downstream for about 2 miles. Much lower contamination was observed for dissolved bottom concentrations; nevertheless Pb (0.56 ± 0.03 nmol/L) is higher than the Italian legal limits established for 2015 and Cd (0.23 ± 0.03 nmol/L) is very close the limit of Cd will be exceeded if the hulk is not removed.     

Zooplankton succession during extraordinary drought–flood cycles: A case study in a South American floodplain lake

We examined the zooplankton abundance and composition of Laguna Grande, a floodplain wetland of the Lower Paraná Basin (Argentina), during an extraordinary drought–flood cycle that affected both the environment and the biological conditions of the lake. Low waters were characterised by remarkably high conductivities and pH values, and high phytoplankton and bacterioplankton abundances with cyanobacterial blooms, while high waters showed opposite features. In relation to zooplankton, the mean abundances of all the taxonomic groups (rotifers, cladocerans, copepods, ciliates, and heterotrophic nanoflagellates) were slightly higher at low waters. Major changes were observed in the specific composition of metazooplankton: the euryhaline species assemblage that dominated in the dry warm period was replaced by several oligohaline littoral and planktonic species characteristic of the Paraná River Basin, when the water level rose. Mean species richness values at high waters doubled those of low waters and were directly correlated to water depth. Most of the rotifers of the genus Brachionus and the cladoceran Moina micrura switched from parthenogenetic to sexual reproduction during low waters, as a response to a harsh environment and crowding. We suggest that the main changes in the environmental conditions in this eutrophic floodplain lake are driven by the hydrology, which regulates the zooplankton succession. The herein described shifts in the zooplankton structure and dynamics of Laguna Grande over an extraordinary drought–flood cycle contribute to the understanding of the processes that might occur under the scenarios predicted by climate change models.     

Application of protective products to “Noto” calcarenite (south-eastern Sicily): a case study for the conservation of stone materials

Noto is an important Baroque urban center in south-eastern Sicily, which was completely reconstructed after the severe earthquake of 1693. Most of its monuments and historic buildings were built in Pietra di Noto stone, a pale cream calcarenite, quarried in outcrops located near the city. This stone, still currently used as building material, is undergoing many forms of alteration and degradation, which cause significant damage to monuments. In this study, three commercial protective products were tested on some Noto calcarenite samples from quarries, with the aim of assessing their protective effectiveness. In particular, petrographic analyses by optical microscopy were carried out for textural characterization of the stone materials. Capillary water absorption, porosimetric and colorimetric procedures, UV radiation and salt crystallization aging tests were performed to better evaluate interactions between protective products and substrate.     

Assessing food web dynamics and relative importance of organic matter sources for fish species in two Portuguese estuaries: a stable isotope approach

Stable carbon and nitrogen isotopes (δ13C, δ1?N) were used to analyse food web dynamics of two of the main estuaries of the Portuguese coast: Tejo and Mira. The ultimate sources of organic matter supporting production of some of the most abundant and commercially important fish species were determined; and seasonal, inter- and intra- estuarine differences in the trophic relations among producers and consumers were identified. Stable isotope analysis was performed in different producers, primary consumers (main prey items for fish) and fish species (Solea solea, Solea senegalensis, Pomatoschistus microps, Dicentrarchus labrax, Liza ramada, Diplodus vulgaris and Atherina presbyter) of two areas in each estuary, in July and October 2009. Model calculations showed that the main prey for the fish species in the Tejo estuary used mostly salt marsh-derived organic matter as nutritional sources, with no marked differences between the sampled months. Trophic levels of fish species from the same estuary differed at multiple scales: inter-species, seasonally and spatially (both between and within estuaries). Significant differences in isotopic composition of fish species were more pronounced spatially (between the two sampled areas in the estuary) than seasonally (between sampled months). Trophic relationships in both estuaries demonstrated that organic matter is transferred to higher trophic positions mainly through benthic pathways. This shows the flexibility of these species to share resources and to exploit temporary peaks in prey populations. The present results showed that extensive disturbance in intertidal habitats from both estuaries may potentially change the balance of organic matter in the base of these complex food webs.     

On the use of infinite elements in the analysis of two-dimensional layered elastic systems via discretized integral equations

A boundary integral equation approach is presented for the two-dimensional plane strain analysis of horizontally layered elastic systems resting on a rough and rigid base. The validity of Somigliana identity for unbounded layers is discussed and an Infinite Boundary Element is proposed in order to take into account the lateral unboundedness of the physical problem in the discretized equations. This element is implemented in a computer code based on a successive stiffness solution procedure. A series of numerical tests concerning single- and multi-layered problems is illustrated, and the performance of the proposed solution method is compared with that of more traditional boundary element and finite element techniques.