Chronology of Quaternary terrace deposits at the locality Hohle Gasse (Pratteln,NW Switzerland)

The Quaternary stratigraphy of the Alpine Foreland consists of distinct terrace levels, which have been assigned to four morphostratigraphic units: Höhere (Higher) Deckenschotter, Tiefere (Lower) Deckenschotter, Hochterrasse (High Terrace) and Niederterrasse (Lower Terrace). Here, we focus on the terrace gravels at Hohle Gasse, SSE of Pratteln near Basel, which are mapped as Tiefere Deckenschotter. Petrographic and morphometric data established from clasts allowed to infer the transport mechanisms and sources of the gravels. Sedimentological analyses indicate that the gravels were transported by a braided river and deposited in a distal glaciofluvial setting. In addition, it can be shown that the majority of the clasts display multiple reworking and only a minority maintained a distinct glaciofluvial shape. Cosmogenic multi-isotope dating using ¹⁰Be and ³⁶Cl allowed direct dating of the sediments at the study site. A depth-profile age of \(2 70_{ - 1 90}^{ + 8 30}\) ka for ¹⁰Be was achieved for the deposits at Hohle Gasse. Unfortunately, no age could be modelled from the ³⁶Cl concentrations as the blank correction was too high. Furthermore, this age proves that the studied terrace level should be assigned to the morphostratigraphic unit Hochterrasse.     

Comparative studies of the kinetic parameters of various algaenans and kerogens via open-system pyrolyses

Kinetic parameters were determined for the first time, via open-system pyrolyses, on algaenans (highly resistant biomacromolecules that are selectively preserved during kerogen formation) isolated from extant microalgae. Parallel studies were also carried out on 10 kerogens exhibiting, with one exception, a low level of maturity. These kerogens included samples chiefly derived from the selective preservation of the above algaenans and samples mainly, or almost exclusively, derived from the “natural vulcanization” pathway. Important differences in activation energy (E_a) distributions were observed between the four algaenans investigated and correlated with their chemical structures. The kerogens predominantly derived from algaenan-selective preservation (Pula alginite, NE 70 and BJ 248 Torbanites, Rundle Oil Shale) also exhibited pronounced differences in E_a distributions. These distributions provided: (i) information on the diversity of the source materials; and (ii) reflected the occurrence of important differences in chemical structures and thermal behaviour between three of the tested kerogens, even though they are all classified as low maturity type I. The Kimmeridge Clay samples and the Lorca Oil Shale showed broad E_a distributions shifted to low energies when compared with the above algaenans and kerogens. Such shifts reflect an important (or even almost exclusive for some of these kerogens) contribution of materials originating from sulphur incorporation into various lipids during early diagenesis. Finally, the kinetic data derived for the nine low maturity fossil samples were extrapolated to a very low, geological heating rate of 3°C Ma⁻¹ and the generation rate curves and cumulative yield curves thus obtained were compared.     

Estimation of viscoelastic attenuation of real seismic data by use of ray tracing software: Application to the detection of gas hydrates and free gas

Analysis of P wave velocity profiles and seismic data recorded over the 2002 Hydratech cruise conducted in the Storegga region, North of Norway, has shown the existence of anomalies (a velocity decrease) in some layers of the medium. An elastic propagation model is not sufficient to explain clearly these anomalies, since the viscoelastic attenuation, represented by the quality factor Q_P, is sensitive to physical phenomena of geological media. The combination of the quality factor profile with the velocity profile leads to realistic explanations of these anomalies. In this article, we explain the procedure which we developed for determining the Q_P profile from the P wave velocity profile and the seismic data recorded during Hydratech cruise. Both the Q_P and velocity profiles indicate anomalies in the same layers. Based on previous studies, we interpret that these anomalies are being due to existence of gas hydrates and free gas within these layers.     

Aerosol polarized phase function and single-scattering albedo retrieved from ground-based measurements

Aerosol optical parameters, polarized phase function and single-scattering albdeo, have been retrieved from ground-based sun photometer measurements in Beijing 2003. The measured aerosol optical thickness varies from 0.12 to 0.77 with an average value of 0.39. The measured Ångström coefficient ranges from 0.75 to 1.47 with an average value of 1.21. The retrieved single-scattering albedo at 870 nm is within the 0.76–0.94 range and the average value is 0.85, suggests there are considerable aerosol absorptions in Beijing. The maximum value of retrieved polarized phase function at 870 nm ranges from 0.068 to 0.225 with an average value of 0.16, and it illustrates good correlations with the Ångström coefficient, i.e. the relative size of aerosol particles. Analyses of measurements and theoretical calculations show the polarized phase function is sensitive to aerosol size distribution and complex refractive index, especially the imaginary part of the refractive index which denotes aerosol light absorbing effects. These results suggest that the polarized phase function is an effective and unique aerosol optical parameter and is able to improve the retrieval of aerosol physical properties.     

Empirical relationships between diversity of invertebrate communities and altitude in rivers: Application to biomonitoring

The relationships between the diversity of invertebrate communities and the altitude of sampling sites were analysed in 438 benthic samples, collected between 1982 and 1991, in 56 rivers of western Switzerland. Diversity, estimated from total number of taxa (genus or family) and from number of taxa intolerant of pollution, was positively correlated with increasing altitude. In contrast, density of human population and the level of organic pollution were negatively correlated with increasing altitude. Therefore, the upstream increase of invertebrate diversity was attributed to the decrease of human population which is the main source of organic pollution. In this study, altitude was used, instead of organic pollution, to predict diversity. Empirical relationships between diversity and altitude were applied to surveys of water quality to describe the general altitudinal pattern characteristic for each region and to single out anomalous sites and rivers. In addition, changes in the altitudinal patterns of diversity can be used to monitor the recovery of rivers from pollution.     

Eruptive history of the Colima volcanic complex (Mexico)

The evolution of the Colima volcanic complex can be divided into successive periods characterized by different dynamic and magmatic processes: emission of andesitic to dacitic lava flows, acid-ash and pumice-flow deposits, fallback nuées ardentes leading to pyroclastic flows with heterogeneous magma, plinian air-fall deposits, scoriae cones of alkaline and calc-alkaline nature. Four caldera-forming events, resulting either from major ignimbrite outbursts or Mount St. Helens-type eruptions, separate the main stages of development of the complex from the building of an ancient shield volcano (25 × 30 km wide) up to two summit cones, Nevado and Fuego.The oldest caldera, C1 (7–8 km wide), related to the pouring out of dacitic ash flows, marks the transition between two periods of activity in the primitive edifice called Nevado I: the first one, which is at least 0.6 m.y. old, was mainly andesitic and effusive, whereas the second one was characterized by extrusion of domes and related pyroclastic products. A small summit caldera, C2 (3–3.5 km wide), ended the evolution of Nevado I.Two modern volcanoes then began to grow. The building of the Nevado II started about 200,000 y. ago. It settled into the C2 caldera and partially overflowed it. The other volcano, here called Paleofuego, was progressively built on the southern side of the former Nevado I. Some of its flows are 50,000 y. old, but the age of its first outbursts is not known. However, it is younger than Nevado II. These two modern volcanoes had similar evolutions. Each of them was affected by a huge Mount St. Helens-type (or Bezymianny-type) event, 10,000 y. ago for the Paleofuego, and hardly older for the Nevado II. The landslides were responsible for two horseshoe-shaped avalanche calderas, C3 (Nevado) and C4 (Paleofuego), each 4–5 km wide, opening towards the east and the south. In both cases, the activity following these events was highly explosive and produced thick air-fall deposits around the summit craters.The Nevado III, formed by thick andesitic flows, is located close to the southwestern rim of the C3 caldera. It was a small and short-lived cone. Volcan de Fuego, located at the center of the C4 caldera, is nearly 1500 m high. Its activity is characterized by an alternation of long stages of growth by flows and short destructive episodes related to violent outbursts producing pyroclastic flows with heterogeneous magma and plinian air falls.The evolution of the primitive volcano followed a similar pattern leading to formation of C1 and then C2. The analogy between the evolutions of the two modern volcanoes (Nevado II–III; Paleofuego-Fuego) is described. Their vicinity and their contemporaneous growth pose the problem of the existence of a single reservoir, or two independent magmatic chambers, after the evolution of a common structure represented by the primitive volcano.     

The mechanical state of the lithosphere in the Altiplano-Puna segment of the Andes

Information about topography, the shape of the geoid, seismicity, Neogene deformation and volcanism in the region of Altiplano-Puna of western South America is used to analyse the state of stress across the convergent plate margin in terms of the effects of topography and simple models of its compensation. An average elevation near 4 km is consistent with compensation by a yet unresolved combination of crustal root and hot uppermost mantle producing a geoid high of 22–27 meters, average horizontal compressive stress (in excess of a reference sea level lithostatic value) of 390 bars in a 150 km thick lithosphere, and an average shear stress of 170 bars along a 30° dipping interplate boundary. The basis for these estimates is evidence for a neutral to extensional stress regime within the high plateau contrasted with a compressional regime on the eastern slopes and along the interplate boundary itself. Comparison with other plateaus in a convergent plate tectonic setting suggests an evolutionary sequence from compressional to extensional tectonics as elevation of the plateau increases.