Trace element geochemistry of K-rich impact spherules from howardites

The howardite–eucrite–diogenite (HED) achondrites are a group of meteorites that probably originate from the asteroid Vesta. Howardites are complex polymict breccias that sometimes contain, in addition to various rock debris, impact melt glasses which show an impressive range of compositions. In this paper we report on the geochemistry and O isotopes of a series of 6 Saharan polymict breccias (4 howardites and 2 polymict eucrites), and on the trace element abundances of high-K impact spherules found in two of them, Northwest Africa (NWA) 1664 and 1769, which are likely paired.The high-K impact spherules found in the howardites NWA 1664 and NWA 1769 display remarkable trace element patterns. Compared to eucrites or howardites, they all show prominent enrichments in Cs, Rb, K, Li and Ba, strong depletion in Na, while the REE and other refractory elements are unfractionated. These features could not have been generated during impact melting of their host howardites, nor other normal HED target materials. The involvement of Na-poor rocks, and possibly rocks of granitic composition, appears likely. Although these lithologies cannot be well constrained at present, our results demonstrate that the surface of Vesta is certainly more diverse than previously thought. Indeed, despite the large number of available HED meteorites (about 1000 different meteorites), the latter are probably not sufficient to describe the whole surface of their parent body.     

Development of a refinement criterion for adaptive mesh refinement in steam-assisted gravity drainage simulation

Steam-assisted gravity drainage (SAGD) is an enhanced oil recovery process for heavy oils and bitumens. Numerical simulations of this thermal process allow us to estimate the retrievable volume of oil and to evaluate the benefits of the project. As there exists a thin flow interface (compared to the reservoir dimensions), SAGD simulations are sensitive to the grid size. Thus, to obtain precise forecasts of oil production, very small-sized cells have to be used, which leads to prohibitive CPU times. To reduce these computation times, one can use an adaptive mesh refinement technique, which will only refine the grid in the interface area and use coarser cells outside. To this end, in this work, we introduce new refinement criteria, which are based on the work achieved in Kröner and Ohlberger (Math Comput 69(229):25–39, 2000) on a posteriori error estimators for finite volume schemes for hyperbolic equations. Through numerical experiments, we show that they enable us to decrease in a significant way the number of cells (and then CPU times) while maintaining a good accuracy in the results.     

Unstructured-mesh modeling of the Congo river-to-sea continuum

With the second largest outflow in the world and one of the widest hydrological basins, the Congo River is of a major importance both locally and globally. However, relatively few studies have been conducted on its hydrology, as compared to other great rivers such as the Amazon, Nile, Yangtze, or Mississippi. The goal of this study is therefore to help fill this gap and provide the first high-resolution simulation of the Congo river-estuary-coastal sea continuum. To this end, we are using a discontinuous-Galerkin finite element marine model that solves the two-dimensional depth-averaged shallow water equations on an unstructured mesh. To ensure a smooth transition from river to coastal sea, we have considered a model that encompasses both hydrological and coastal ocean processes. An important difficulty in setting up this model was to find data to parameterize and validate it, as it is a rather remote and understudied area. Therefore, an important effort in this study has been to establish a methodology to take advantage of all the data sources available including nautical charts that had to be digitalized. The model surface elevation has then been validated with respect to an altimetric database. Model results suggest the existence of gyres in the vicinity of the river mouth that have never been documented before. The effect of those gyres on the Congo River dynamics has been further investigated by simulating the transport of Lagrangian particles and computing the water age.     

The surface chemistry of multi-oxide silicates

The surface chemistry of natural wollastonite, diopside, enstatite, forsterite, and albite in aqueous solutions was characterized using both electrokinetic techniques and surface titrations performed for 20 min in batch reactors. Titrations performed in such reactors allow determination of both proton consumption and metal release from the mineral surface as a function of pH. The compositions, based on aqueous solution analysis, of all investigated surfaces vary dramatically with solution pH. Ca and Mg are preferentially released from the surfaces of all investigated divalent metal silicates at pH less than ∼8.5-10 but preferentially retained relative to silica at higher pH. As such, the surfaces of these minerals are Si-rich and divalent metal poor except in strongly alkaline solutions. The preferential removal of divalent cations from these surfaces is coupled to proton consumption. The number of protons consumed by the preferential removal of each divalent cation is pH independent but depends on the identity of the mineral; ∼1.5 protons are consumed by the preferential removal of each Ca atom from wollastonite, ∼3 protons are consumed by the preferential removal of each Mg or Ca atom from diopside or enstatite, and ∼4 protons are consumed by the preferential removal of each Mg from forsterite. These observations are interpreted to stem from the creation of additional ‘internal’ adsorption sites by the preferential removal of divalent metal cations which can be coupled to the condensation of partially detached Si. Similarly, Na and Al are preferentially removed from the albite surface at 2 > pH > 11; mass balance calculations suggest that three protons are consumed by the preferential removal of each Al atom from this surface over this entire pH range. Electrokinetic measurements on fresh mineral powders yield an isoelectric point (pH_IEP) 2.6, 4.4, 3.0, 4.5, and <1, for wollastonite, diopside, enstatite, forsterite, and albite, respectively, consistent with the predominance of SiO₂ in the surface layer of all of these multi-oxide silicates at acidic pH. Taken together, these observations suggest fundamental differences between the surface chemistry of simple versus multi-oxide minerals including (1) a dependency of the number and identity of multi-oxide silicate surface sites on the aqueous solution composition, and (2) the dominant role of metal-proton exchange reactions on the reactivity of multi-oxide mineral surfaces including their dissolution rate variation with aqueous solution composition.     

Rock-magnetic properties of topsoils and urban dust from Morelia (>800,000 inhabitants), Mexico: Implications for anthropogenic pollution monitoring in Mexico’s medium size cities

In this work, we investigate the correlation between some magnetic parameters and the level of contamination by heavy metals in urban soils from Morelia city, western Mexico. The magnetic study was carried out on 98 urban soils samples belonging to distinct land uses. Most of analyzed samples contain ferrimagnetic minerals as the responsible for magnetization, most probably corresponding to the titanomagnetites/ titanomaghemites solid solutions. This is inferred from the susceptibility vs. temperature measurements and the isothermal remanent magnetization (IRM) experiments. These measurements also indicate that most of samples are almost completely saturated before 300 mT. Additionally, the S_-200 values (S_-200 = IRM_-200/ SIRM, where IRM_-200= Back-field of 200 mT after magnetic saturation) are between 0.7 and 1.0, characteristic of low coercivity magnetic minerals. The averaged saturation isothermal remanent magnetization (SIRM) curves can be used as an indicator of pollution level, as these curves show different saturation values according to the level of contamination by heavy metals: Cu, Ni, Cr and Sr. These associations of (titano)magnetite with heavy metals were observed by Scanning Electron Microscope revealing some complex aggregates rather than commonly detected spherules.     

Requirements for Topology in 3D GIS

Topology and its various benefits are well understood within the context of 2D Geographical Information Systems. However, requirements in three‐dimensional (3D) applications have yet to be defined, with factors such as lack of users’ familiarity with the potential of such systems impeding this process. In this paper, we identify and review a number of requirements for topology in 3D applications. The review utilises existing topological frameworks and data models as a starting point. Three key areas were studied for the purposes of requirements identification, namely existing 2D topological systems, requirements for visualisation in 3D and requirements for 3D analysis supported by topology. This was followed by analysis of application areas such as earth sciences and urban modelling which are traditionally associated with GIS, as well as others including medical, biological and chemical science. Requirements for topological functionality in 3D were then grouped and categorised. The paper concludes by suggesting that these requirements can be used as a basis for the implementation of topology in 3D. It is the aim of this review to serve as a focus for further discussion and identification of additional applications that would benefit from 3D topology.     

Population-level genotyping of coat colour polymorphism in woolly mammoth (Mammuthus primigenius)

Patterns in the spatial or temporal distribution of genotypes may be indicative of natural selection. Previous work on the woolly mammoth melanocortin-1 receptor (Mc1r) gene identified three polymorphic positions that suggest Pleistocene populations may have harboured both light- and dark-haired mammoths (Rompler et al., 2006, 313: 62). Here, we extend this work and present the first population-level analysis of a functional gene in an extinct species. We genotyped the Mc1r gene in 47 woolly mammoth samples excavated from sites across the central portion of the woolly mammoths’ former range to examine the extent of variation of this polymorphism through time and across space. Only one individual was found to be heterozygous, indicating that the frequency of the ‘light’ mutant allele was very low. We conclude that light-coloured woolly mammoths would have been very rare, and may even have been non-existent if the ‘light’ mutant allele was strongly selected against in its homozygotic form. With the increasing availability of large-scale sequencing technologies, population-level datasets capable of identifying local adaptation will become increasingly attainable.     

Kinetics and mechanism of natural fluorapatite dissolution at 25 °C and pH from 3 to 12

The dissolution rates of natural fluorapatite (FAP), Ca₁₀(PO₄)₆F₂, were measured at 25 °C in mixed-flow reactors as a function of pH from 3.0 to 11.7, and aqueous calcium, phosphorus, and fluoride concentration. After an initial preferential Ca and/or F release, stoichiometric Ca, P, and F release was observed. Measured FAP dissolution rates decrease with increasing pH at 3 ? pH ? 7, FAP dissolution rates are pH independent at 7 ? pH ? 10, and FAP dissolution rates again decrease with increasing pH at pH ? 10. Measured FAP dissolution rates are independent of aqueous Ca, P, and F concentration at pH ≈ 3 and pH ≈ 10.Apatite dissolution appears to be initiated by the relatively rapid removal from the near surface of F and the Ca located in the M1 sites, via proton for Ca exchange reactions. Dissolution rates are controlled by the destruction of this F and Ca depleted surface layer. The destruction of this layer is facilitated by the adsorption/penetration of protons into the surface at acidic conditions, and by surface hydration at neutral and basic conditions. Taking into account these two parallel mechanisms, measured fluorapatite forward dissolution rates can be accurately described using

     

Longues séries d'insolation homogénéisées en France

Prior to have long-term sunshine-duration series, data rescue effort has to be engaged. Eighteen series have been homogenized over the period 1931–2000. These series complete the set of diagnoses on climate change at a regional scale, confirm part of the diagnosis established for the temperatures, and offer new tracks for the mechanisms of climate change. To cite this article: J.-M. Moisselin, C. Canellas, C. R. Geoscience 337 (2005).     

Archeointensity investigation on pottery vestiges from Puertas de Rolón, Capacha culture: In search for affinity with other Mesoamerican pre-Hispanic cultures

We report the results of a rock magnetic and archeointensity study on pottery fragments recovered at the archaeological site of Puertas de Rolón, Capacha culture (Colima), that is considered one of the most important pre-Classic cultural developments of western Mesoamerica, Mexico. Standard rock magnetic experiments were carried out in order to investigate the reliability of the ancient field strength recovered from studied materials. Six out of the seven analyzed fragments gave reliable intensity determinations. The mean archeointensity value obtained in this study is 35.3 ± 3.4 μT. It is in good agreement with another contemporaneous Mesoamerican mean archeointensity of 34.3 ± 1.1 μT obtained for El Opeño. Statistically similar rock-magnetic parameters between ceramics from El Opeño and Puertas de Rolón potsherds appear to be related to clay-sources with similar geological settings and weathering processes. Alternatively, ancient trade or interexchange between western (Capacha Culture) and eastern Mesoamerica locations, as it has been proposed earlier, seem to be supported by results obtained in this study.