Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

长江中下游地区二叠纪碳酸盐斜坡沉积及其成矿意义

长江中下游地区二叠系发育,主要由碳酸盐岩、硅质岩和碎屑岩组成.其二叠系不仅是华南地区最重要的烃源岩,而且也是长江中下游铜等多金属成矿带的重要赋矿层位之一,因此,进一步确定其沉积相以及古地理意义重大.发育在长江中下游地区的二叠系以往多被认为主要属于浅水碳酸盐台地沉积,其次是较深水的陆棚沉积或者裂陷槽沉积.但进一步研究发现,二叠系的碳酸盐斜坡沉积相发育,它主要由砾屑石灰岩、泥晶粉屑灰岩、硅质岩和泥晶灰岩组成,斜坡主要发育于中二叠世的栖霞期和茅口期,其次是吴家坪期和长兴期.碳酸盐斜坡主要沿安徽铜陵-东至-宿松-线以及湖北大冶-江西瑞昌一线分布,其成因大致受江南断裂和长江断裂控制.同沉积断裂不仅控制着碳酸盐斜坡的发育和展布,同时也构筑了深水盆地、斜坡和浅水台地沉积体系,构成油气生、储、盖单元的组合,为二叠系成为华南地区最重要的烃源岩提供了成因解释.控制斜坡发育的断裂既可以是含矿热水溶液、海底热泉和火山的通道,同时斜坡带也可以成为金属硫化物矿床的富集场所,因此,它对长江中下游铜多金属成矿带的层控和喷流成因提供了可选择的解释.长江中下游地区中、晚二叠世断裂发育,显示盆地的伸展特征,符合古特提斯洋东扩构造背景.     

南海温跃层基本特征及一维预报模式

根据现有1907—1990年南海大面调查资料,按1°×1°网格进行逐月的标准水层的温度统计。在此基础上采用3次样条函数的插值方法计算出整个南海温跃层的深度、厚度和强度并予以相应分析。分析表明,南海温跃层主要分为两种类型:第一类为辐射型,主要分布在南海北部的陆架区内,季节变化显著;第二类为不同水体叠置型,主要分布在广大深水区,它长年存在,季节变化较小。一种温跃层的一维积分预报模式,该模式是基于忽略热平流作用和水平热扩散的前提下,从局部热平衡方程出发,建立了受海面热收支及风混合作用下求解温度垂直分布及温跃层的时空变化。在南海北部水深约300m处进行了单站温跃层后报,结果表明,温跃层的深度、厚度和强度的相对误差均在30％以下。     

非线性洋面温度反演

本文从辐射方程出发，简述洋面温度与亮度温度之间的非线性关系，进行非线性洋面温度反演的方案设计，用正演算法 计算出非线性洋面温度反演公式的回归系数，对样进行检验。     

秦山核电站邻近水域环境化学要素特征

本文根据1989年4、7、10月和1990年1月(春、夏、秋、冬)秦山核电站邻近水域零点生态调查和水质监测结果的资料整理而成。经研究证明,该海域是河-海混合水域,盐度从小于3至12之间变化,受杭州湾的涌潮、风浪的影响,水体混合比较强烈,悬浮颗粒物质的含量比长江口高。由于该测区所处的海岸、海底地形,生态系统、径流输入以及水体交换状况不同,故其海洋学特征也不相同。     

鱼粉脂肪酸组成的分析研究

本文应用气相色谱对水产饲料的主要原料——— 4类进口鱼粉的脂肪酸组成进行分析 ,结果表明 :①鱼粉中主要脂肪酸含量SFA为C1 6∶0、C1 8∶0 ,MUFA为C1 8∶1、C1 6∶1 ,PUFA为EPA和DHA .② 4类鱼粉中 ,美国、新西兰、俄罗斯的鱼粉MUFA含量较为接近 ,都在 4 0 %左右 ,但新西兰鱼粉的C1 8∶1含量较美国鱼粉高 ,其平均值分别为 2 50 %和 1 9.53% ,而C 2 0∶1、C2 2∶1 ,则比美国低一些 ,俄罗斯鱼粉的含量居两者之间 .智利鱼粉的MUFA比前 3种鱼粉低 ,只有 30 %左右 .③ 4类鱼粉中新西兰鱼粉的PUFA最低 ,它们的EPA与DHA的比值为 :美国鱼粉接近 1∶1 ,新西兰鱼粉为1∶1 .5～ 1∶3.2 ,俄罗斯鱼粉为 1∶1 .2～ 1∶1 .4 ,智利鱼粉为 1∶2左右 ,④智利鱼粉的C2 2∶5n 3明显高于其它 3类鱼粉 ,而C2 0∶1、和C2 2∶1则明显低于其它 3类鱼粉     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

珠江口伶仃洋水域溶解氧特征

根据１９８７年６，８，１１月和１９８８年２月４个航次珠江口伶汀洋的调查资料，分析了溶解氧的特征。结果表明：溶解氧含量表层均高于底层，周年变化呈现从夏季到冬季逐渐上升，且明显受珠江径流的影响，溶解氧（基本上是不饱和状态）与盐度成负相关。有机物和营养盐均影响溶解氧，但水温仍为溶解氧主要影响因素。     

Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves