Apatite fission track and (U-Th)/He thermochronology of the Rochovce granite (Slovakia) – implications for the thermal evolution of the Western Carpathian-Pannonian region

The thermal evolution of the only known Alpine (Cretaceous) granite in the Western Carpathians (Rochovce granite) is studied by low-temperature thermochronological methods. Our apatite fission track and apatite (U-Th)/He ages range from 17.5 ± 1.1 to 12.9 ± 0.9 Ma, and 12.9 ± 1.8 to 11.3 ± 0.8 Ma, respectively. The data thus show that the Rochovce granite records a thermal event in the Middle to early Late Miocene, which was likely related to mantle upwelling, volcanic activity, and increased heat flow. During the thermal maximum between ~17 and 8 Ma, the granite was heated to temperatures ? 60 °C. Increase of cooling rates at ~12 Ma recorded by the apatic fission track and (U-Th)/He data is primarily related to the cessation of the heating event and relaxation of the isotherms associated with the termination of the Neogene volcanic activity. This contradicts the accepted concept, which stipulates that the internal parts of the Western Carpathians were not thermally affected during the Cenozoic period. The Miocene thermal event was not restricted to the investigated part of the Western Carpathians, but had regional character and affected several basement areas in the Western Carpathians, the Pannonian basin and the margin of the Eastern Alps.     

Genetic Implications of Two Different Ultramafic Rocks from Hongseong Area in the Southwestern Gyeonggi Massif, South Korea

Two distinct ultramafic bodies occur in Baekdong and Bibong in the Hongseong area within Gyeonggi massif of South Korea. The Hongseong area is now extensively documented as an extension of the Dabie-Sulu collision belt in China. The Baekdong ultramafic body has a NWW elongation direction. This elongation trend is similar to the general trend of the Dabie-Sulu collision belt. The Bibong ultramafic body is elongated in a NNE direction and runs parallel to the direction of the main fault in the study area. The Baekdong ultramafic bodies show porphyroclastic and mylonitic textures while those at Bibong exhibit a mosaic texture. Both were grouped into peridotite and serpentinite based on their modal abundance of serpentine. In the olivine (Fo) vs. spinel [Cr# = Cr/ (Cr+Al)] diagram, both ultramafic rocks fall with in olivine spinel mantle array. The compositions of olivine, orthopyroxene and spinel indicate that the Baekdong ultramafic rock formed in deeper parts of the upper-mantle under passive margin tectonic setting. The SREE content of Baekdong ultramafic rock vary from 0.19 to 5.7, exhibits a flat REE pattern in the chondrite-normalized diagram, and underwent 5% partial melting. Conversely, large variation in SREE (0.5 21.53) was observed for Bibong ultramafic rocks with an enrichment of LREE with a negative slope and underwent 17 24% partial melting. The Baekdong ultramafic rocks experienced three stages of metamorphism after a high pressure residual mantle stage. The first stage of metamorphism occurred under the eclogite-granulite transitional facies (1123 911°C, >16.3 kb) the second under the granulite facies (825 740°C, 16.3 11.8 kb) and the third is the retrogressive metamorphism under amphibolite facies (782 718°C, 8.2 8.7 kb) metamorphism. The Baekdong ultramafic rocks had undergone high-P/T metamorphism during subduction of the South China Block, and experienced a fast isothermal uplift, and finally cooled down isobarically. Evidences for metamorphism were not identified in Bibong ultramafic rocks. Hence, the Baekdong ultramafic rocks with in the Hongseong area may indicate a link on the Korean counterpart of Dabie-Sulu collision belt between North and South China Blocks.     

The Estimation of the Cavity Effect by Higher Degree Finite Element Approximation

The measurements of tide-induced tilts and deformations are usually performed in underground cavities (mostly man-made). Therefore, the data obtained must be debugged of the influence of the cavity itself (cavity effect) and of the effect of elastic parameter inhomogeneities in the vicinity of the point of measurement (geological effect), if they are to he presented. Since these effects are reflected as a modulation of tidal waves (in both amplitude and phase), the only way to perform this can be modelling of the strain and stress field around the cavity as precisely as possible. The finite element method (F.E.M.) seems to be a very useful tool for this purpose. To justify some conclusions in this paper, a number of numerical runs of the F.E.M. models of the tide-induced strains and stresses (in two dimensions) were performed. A higher degree of approximation (up to the value of 7) was used in these calculations. To estimate the cavity effect, the correction factors (relative changes of particular strain components due to the presence of the cavity) were determined and plotted in the cavity's close neighbourhood. The distribution of the deformation energy (and also the work of external forces) over the whole domain of interest is given, and the conclusions for subsequent error estimation are drawn. An attempt was made to compare the real tilt data to the theoretical deduced from the numerical model.     

Numerical flow simulation of flush type intake duct of waterjet

Waterjet propulsion system is widely used to thrust high speed marine vessels in excess of 30–35 knots by virtue of high propulsive efficiency, good maneuverability, and less vibration. Since, however, approximately 7–9% of the total power is lost in intake duct due to flow separation, nonuniformity, etc., detail understanding of flow phenomena occurring within intake duct is essential to reduce the power loss. The present work solved 3D incompressible RANS equations on multiblocked grid system of the flush type intake duct of waterjet. The numerical results of surface pressure distributions, velocity vectors, and streamlines were compared with experiments and good agreements were obtained for three jet velocity ratios. Strong suction flow through the inlet was shown and the vortex induced by the separation along the corner of the side wall was clearly shown. Flow separation on the lip was also observed. The location of stagnation point on the lip was well predicted, in accordance with PIV measurement.     

Dilution of North Pacific Intermediate Water studied with chlorofluorocarbons

Assessment was made of residual ratio of North Pacific Intermediate Water (NPIW) produced in subpolar region of the North Pacific using chlorofluorocarbons, CFC-11 and CFC-12 (CCl₃F and CCl₂F₂), along 175°E. NPIW on density horizons less than 26.80 remained more than 80% north of 30°N. It was suggested that new NPIW laterally spreads over the northern North Pacific without hardly being diluted by the surroundings. For density horizons greater than 26.80 north of 30°N, NPIW remained less than 60%. The difference in the residual ratio between <26.80 and >26.80 north of 30°N suggests that NPIW is produced on density horizons less than 26.80, which contacts the atmosphere in the subpolar region, and that NPIW is diluted by upwelling deep water on density horizons greater than 26.80 in high latitude of the North Pacific. NPIW on a density horizon of 26.80 remained about 50% south of 30°N. The decrease in the horizontal distribution of the residual ratio of NPIW suggests that half the new NPIW produced in the subpolar region is laterally spread over the North Pacific with the southward movement of NPIW.     

Potential effects of future adoption of the REDD mechanism as a preventive measure against deforestation and forest degradation in North Korea

This study assesses potential effects of adaption to climate change in the future as a carbon related value using a baseline and credit approach, considering the implementation of the Reducing Emissions from Deforestation and forest Degradation(REDD) mechanism. Basic data were obtained for implementing the REDD mechanism in the Democratic People's Republic of Korea(DPRK) for scientific decision-making to prevent deforestation and forest degradation. The potential effects according to the implementation of the REDD mechanism in the DPRK based on forest status data(the latest) are as follows. If the deforestation rate is reduced to a level below 6% through a 20-year REDD mechanism beginning in 2011, 0.01–11.64 C-tons of carbon credit per ha could be issued for DPRK. Converted into CO?-tons per ha, this amounts to 0.03–42.68 CO?-tons, which translates to a minimum of 226,000 CO?-tons and a maximum of 289,082,000 CO?-tons overall for forests in DPRK. In terms of carbon price, this measures up to 1.10 million USD–1.4 billion USD, considering that the REDD carbon price in voluntary carbon markets in 2010 was around 5 USD.     

A Method for Reinforcing the Ground Adjacent to the Footing Using Micropiles

The in-situ application of micropiles has gradually increased in limited spaces of downtown areas because the micropile has various advantages, such as low vibration and noise and compact machine size. In this study, model tests were carried out to understand the reinforcement effect induced by the mechanical interaction between the micropile and soil. The micropiles were installed in the soil adjacent to footings. Factors such as reinforced range (W) with piles, spacing (S) between piles, the installed angle (θ) of piles, and pile length (L) were considered variables in the tests. The reinforced angle (θ) was a more critical factor than the others for restraining the settlement and increasing soil stiffness in the model test results. The reinforcement effect rapidly increased around the reinforced range (W) of 2B (B: the width of a footing), the reinforced angle (θ) of 45 ～ 75°, and the pile length (L) of 3B. Based on the results of the experimental analyses, the purpose of this study is to improve the reinforcement efficiency of micropiles by recommending the most effective pattern and design method for installing them.     

Early diagenesis in recent bottom sediments of the Dvina Bay (White Sea)

Investigations in the water column and bottom sediments including entrapped water were carried out on expeditions of the P.P. Shirshov Institute of Oceanology in the Dvina Bay, the White Sea. We studied the transformation of particulate organic matter at the biogeochemical barrier between the water and bottom and in the underlying Holocene sediments. Low rates of the early diagenesis of sediments caused by low values of primary production in the conditions of high fluxes of terrigenous organic matter were established. The low temperatures of microorganisms habitat play the secondary role.     

Spatial variability of the species composition,abundance, and productivity of the phytoplankton in the white sea in the late summer period

The species composition, cell concentration (N), and biomass (B) of the phytoplankton, as well as the chlorophyll a (Chl a) concentration, primary production (PP), and the concentrations of the dissolved inorganic micronutrients (phosphorus, silica, nitrogen as nitrite), were estimated for Kandalaksha Bay (KB), Dvina Bay (DB), and the basin (Bas) of the White Sea in August of 2004. The micronutrient concentrations were lower compared to the average long-term values for the summer period. The Chl a concentration varies from 0.9 to 2.0 mg/m³ for most of the studied areas, reaching up to 7.5 mg/m³ in the Northern Dvina River estuary. The surface water layer of the DB was the most productive area, where the PP reached up to 270–375 mg C/(m³ day). The phytoplankton biomass varied from 11 to 205 mg C/m³ with the highest values observed in the Bas and DB. Three groups of stations were defined during the analysis of the phytoplankton’s species composition similarity. The dinoflagellates Dinophysis norvegica and Ceratium fusus were particular to the phytoplankton assemblages in the KB; the diatom Ditylum brightwellii was particular to the upper and central parts of the DB. These three phytoplankton species were less abundant in the Bas.