Negative Impacts of Perkinsus olseni Infection in Manila Clam Ruditapes philippinarum Observed from Tidal Flats in Anmyeondo Island on the West Coast of Korea During Post-Spawning Period

Ocean Science Journal - The high load of protozoan parasites in marine bivalves often leads to mass mortalities of the hosts. On the west coast of Korea in the Yellow Sea, the protozoan parasite...     

P-wave attenuation anisotropy in TI media and its application in fracture parameters inversion

The existence of aligned fractures in fluid-saturated rocks leads to obvious attenuation anisotropy and velocity anisotropy. Attenuation anisotropy analysis can be applied to estimate fracture density and scale, which provide important information for reservoir identification. This paper derives P-wave attenuation anisotropy in the ATI media where the symmetry axis is in the arbitrary direction theoretically and modifies the spectral ratio method to measure attenuation anisotropy in the ATI media, thus avoiding a large measurement error when applied to wide azimuth or full azimuth data. Fracture dip and azimuth can be estimated through attenuation anisotropy analysis. For small-scale fractures, fracture scale and fracture density can be determined with enhanced convergence if velocity and attenuation information are both used. We also apply the modified spectralratio method to microseismic field data from an oilfield in East China and extract the fracture dip through attenuation anisotropy analysis. The result agrees with the microseismic monitoring.     

The roughness of the dark side of Iapetus from the 2004 to 2005 flyby

The roughness of a planetary surface offers clues to its past geologic history. We apply a surface roughness model developed by Buratti and Veverka (Buratti, B.J., Veverka, J. [1985]. Icarus 64, 320-328) to Cassini ISS data from the January 1st, 2005 flyby of Iapetus. This model uses the observed scattering behavior to provide a depth to radius factor q quantifying the size of idealized craters on the surface. Our findings indicate that the surface on the dark side is significantly smoother than the surfaces of other icy low-albedo saturnian satellites. We have found that the average depth to radius on the leading (dark) side is 0.084, corresponding to a Hapke mean slope angle of 6°. As compared to the 13-33° Hapke mean slope angle of other icy satellites (Buratti, B.J., and 10 colleagues [2008]. Icarus 193, 309-322), our results present a clearly different picture for the leading surface of Iapetus, suggesting that the dark deposit contributes to the decrease in macroscopic surface roughness of the leading side. Attempts were made to obtain an average depth to radius value for the trailing (bright) side; however the scans of the bright side from this flyby exhibited large variations in albedo, resulting in results that were physically unrealistic.     

Spheroidal pyroxenite aggregates in the Bushveld Complex — a special case of silicate liquid immiscibility

Spherical aggregates of orthopyroxene are reported from some parts of the Bushveld Complex in a variety of host rocks.Detailed mapping has shown that these spherical aggregates, comprising pyroxenite spheroids in a quartz-norite matrix, are contact phenomena and not stratigraphic markers. Orthopyroxene, biotite and amphibole are enriched in spheroids relative to matrix; their mineral chemistry showing a fairly constant orthopyroxene and plagioclase composition through the spheroids and into the matrix, indicating in-situ formation.Bulk chemistry shows spheroid to matrix tie-lines orthogonal to those generally accepted for silicate liquid immiscibility, but other chemical information is consistent with the occurrence of immiscibility.The formation of the aggregates may be related to the industrial process of spherical agglomeration, by which spheroids are formed by the introduction of an immiscible “bridging liquid” to the melt — probably derived from the floor rocks in this case. The mechanism accounts for the field relationships, petrography and chemistry of the aggregate-matrix system. The petrology of the process equates with a special case of silicate liquid immiscibility induced by local contamination and ageing of the original magma.A similar “bridging liquid” mechanism could also account for the formation of the so-called “boulder bed” beneath the Merensky Reef.     

基于地貌单元的小区域地质灾害易发性分区方法研究

以汶川县城周边区域为研究区,分别以栅格单元与地貌单元作为单位评价单元,以信息量法与逻辑回归法两种评价模型对研究区进行地质灾害易发性评价分区。根据对评价结果的比较分析,在小区域范围内,基于地貌单元的区域易发性分区不仅仅能够更好地体现出区域内局部综合特性,而且评价分区结果与地质灾害实际分布情况更加吻合,分级层次更加明显,数学模型的适用效率很好。由此可见,在小范围区域内,基于地貌单元的地质灾害易发性评价分区具有良好的适用性与可塑性,在大比例尺地质灾害易发性和危险性制图中是一个有益的尝试与启发。     

The granite problem as exposed in the southern Snake Range,Nevada

A geochemically and mineralogically diverse group of granitoids is present within an area of 900 km² in the southern Snake Range of eastern Nevada. The granitoids exposed range in age from Jurassic through Cretaceous to Oligocene and include two calcic intrusions, two different types of two-mica granites, and aplites. The younger intrusions appear to have been emplaced at progressively more shallow depths. All of these granitoid types are represented elsewhere in the eastern Great Basin, but the southern Snake Range is distinguished by the grouping of all these types within a relatively small area. The Jurassic calcic pluton of the Snake Creek-Williams Canyon area displays large and systematic chemical and mineralogical zonation over a horizontal distance of five km. Although major element variations in the pluton compare closely with Daly's average andesite-dacite-rhyolite over an SiO₂ range of 63 to 76 percent, trace element (Rb, Sr, Ba) variations show that the zonation is the result of in situ fractional crystallization, with the formation of relatively mafic cumulates on at least one wall of the magma chamber. Models of trace element and isotopic data indicate that relatively little assimilation took place at the level of crystallization. Nonetheless, an initial ⁸⁷Sr/⁸⁶Sr value of 0.7071 and δ ¹⁸O values of 10.2 to 12.2 permil suggest a lower crustal magma that was contaminated by upper crustal clastic sedimentary rocks before crystallization. The involvement of mantle-derived magmas in its genesis is difficult to rule out. Two other Jurassic plutons show isotopic and chemical similarities to the Snake Creek-Williams Canyon pluton. Cretaceous granites from eastern Nevada that contain phenocrystic muscovite are strongly peraluminous, and have high initial Sr-isotope ratios and other features characteristic of S-type granitoids. They were probably derived from Proterozoic metasediments and granite gneisses that comprise the middle crust of this region. Another group of granitoids (including the Tertiary aplites) show chemical, mineralogic, and isotopic characteristics intermediate between the first two groups and may have been derived by contamination of magmas from the lower crust by the midcrustal metasediments.     

A Method for Installing Piezometers in Large Cobble Bed Rivers

An impact drive point method is described for emplacing piezometers in a cobble river bottom where this has previously been difficult without the use of drilling rigs. To force the drive point piezometers through coble, the vibrational impact of an air-powered hammer was carried directly to the drive point by the use of an internal drive rod. After insertion to depth, the drive rod was removed from the lower portion of the piezometer and a standpipe was added to extend the piezometer above the river level. Piezometers installed in this way have permitted water quality analysis and dynamic measurement of vertical potentials in cobble sediments ranging in size from 2.5 to >30 cm and the method has been successfully used in the Columbia River, USA, and Töss River, Switzerland. This innovative method provides information on the hydrodynamics of pore water in highly permeable, cobble deposits that are common in high-energy river and lake bottoms. Piezometers installed using the internal drive rod method facilitate the assessment of the temporal and spatial dynamics of recharge and discharge at the ground water/surface water interface and analyses of the ecological connectivity between the hyporheic zone and surface water of rivers and streams. This information will lead to improved management decisions related to our nation's ground water and surface water supplies.     

Incorporating uncertainty into the estimation of biological reference points for a spiny lobster (Panulirus penicillatus) fishery

The status of a fishery is often defined as the probability of fishing mortality rate exceeding a perilous level for long‐term sustainability. Lobster stock assessments are often subject to large uncertainty in input data and high levels of natural variability in lobster life history processes, which calls for incorporating uncertainty associated with both indicator and management reference points in an evaluation of biological risk of overfishing. Using a Monte Carlo simulation approach, we evaluated the impacts of uncertainty in modelling on the determination of the status of the Taitung spiny lobster (Panulirus penicillatus) fishery (Taiwan), which has not been quantitatively determined despite its commercial importance. The commonly used biological reference points derived from the per recruit model (F _0.1 the fishing mortality rate where the slope of the curve of yield‐per‐recruit model is 10% of the maximum slope and F _4Q%, the fishing mortality rate that reduces the expected egg production for a cohort of female lobsters to 40% of that produced in the absence of a fishery of the egg‐per‐recruit model) were influenced by uncertainties associated with lobster life history and fishery parameters. A large uncertainty in the current fishing mortality rate (F _cnr) and estimates of biological reference points (F _BRPs) increased the uncertainty in determining the risk of overexploitation throughout the confidence levels of the stochastic decision‐making framework. This simulation study suggests that the target reference point of F _40% is less sensitive to the input parameters’ uncertainty than F _0.1 We suggest a further evaluation of other F‐based references points and development of biomass‐based reference points before final selection and implementation for the management of the Taitung lobster fishery.     

Some statistical characteristics of large deepwater waves around the Korean Peninsula

The relationship between significant wave height and period, the variability of significant wave period, the spectral peak enhancement factor, and the directional spreading parameter of large deepwater waves around the Korean Peninsula have been investigated using various sources of wave measurement and hindcasting data. For very large waves comparable to design waves, it is recommended to use the average value of the empirical formulas proposed by Shore Protection Manual in 1977 and by Goda in 2003 for the relationship between significant wave height and period. The standard deviation of significant wave periods non-dimensionalized with respect to the mean value for a certain significant wave height varies between 0.04 and 0.21 with a typical value of 0.1 depending upon different regions and different ranges of significant wave heights. The probability density function of the peak enhancement factor is expressed as a lognormal distribution, with its mean value of 2.14, which is somewhat smaller than the value in the North Sea. For relatively large waves, the probability density function of the directional spreading parameter at peak frequency is also expressed as a lognormal distribution.     

Designation processes for marine protected areas in the coastal wetlands of South Korea

The history of Korean tidal flat management and the process for designating Coastal Wetland Protected Areas (CWPAs) are described. Korean coastal wetlands have a long history of intensive use through reclamation for agricultural and industrial uses in the 20th century. Recently, the management policy is shifting away from intensive use towards the conservation of wetlands. This shift is caused by increasing public awareness of the value of wetlands and strong institutional support from the government. Since the Wetlands Conservation Act was passed in 1999, a total of twelve CWPAs have been designated through both top-down and bottom-up processes. Three designation paths are classified based on the relevant drivers, namely government-driven designations (seven CWPAs), local community driven designations (three CWPAs), and conflict resolution (trade-offs) driven designation (two CWPAs). The lessons learned from the designation of Korean CWPAs is that diversification of designation process could facilitate voluntary participation of local stakeholders and thereby enhance the chance of successful implementation of wise use strategy of tidal flats.