Transpiration and plant water relations of evergreen woody vegetation on a recently constructed artificial ecosystem under seasonally dry conditions in Western Australia

Understanding transpiration and plant physiological responses to environmental conditions is crucial for the design and management of vegetated engineered covers. Engineered covers rely on sustained transpiration to reduce the risk of deep drainage into potentially hazardous wastes, thereby minimizing contamination of water resources. This study quantified temporal trends of plant water potential (ψ_p), stomatal conductance (g_s), and transpiration in a 4‐year‐old evergreen woody vegetation growing on an artificial sandy substrate at a mine waste disposal facility. Transpiration averaged 0.7 mm day^?1 in winter, when rainfall was frequent, but declined to 0.2 mm day^?1 in the dry summer, when the plants were quite stressed. In winter, the mean ψ_p was ?0.6 MPa at predawn and ?1.5 MPa at midday, which were much higher than the corresponding summer values of ?2.0 MPa and ?4.8 MPa, respectively. The g_s was also higher in winter (72.1–95.0 mmol m^?2 s^?1) than in summer (<30 mmol m^?2 s^?1), and negatively correlated with ψ_p (p < 0.05, r² = 0.71–0.75), indicating strong stomatal control of transpiration in response to moisture stress. Total annual transpiration (147.2 mm) accounted for only 22% of the annual rainfall (673 mm), compared with 77% to 99% for woody vegetation in Western Australia. The low annual transpiration was attributed to the collective effects of a sparse and young vegetation, low moisture retention of the sandy substrate, and a superficial root system constrained by high subsoil pH. Amending the substrate with fine‐textured materials should improve water storage of the substrate and enhance canopy growth and deep rooting, while further reducing the risk of deep drainage during the early stages of vegetation establishment and in the long term. Overall, this study highlights the need to understand substrate properties, vegetation characteristics, and rainfall patterns when designing artificial ecosystems to achieve specific hydrological functions. Copyright © 2011 John Wiley & Sons, Ltd.     

Transfer factors of contamination between the German Bight and its tributary waters derived from measured tritium and Cs-137 activity concentrations

Summary Evaluation of the results of radioactivity monitoring in the southern North Sea between 1977 and 1987 has shown that in the water of the German Bight three areas stand out due to their different ratios between salinity and concentration of dissolved Cs-137 and tritium. While salinity steadily increases with greater distance from the coast, the Cs-137 concentration above 34 PSU (Practical Salinity Unit) increases sharply and shows how far water from the western and central North Sea, contaminated by nuclear reprocessing in Sellafield (Irish Sea), reaches into the German Bight. In the 34 to 32.5 PSU range, the influence can be seen of water contaminated by tritium originating in the rivers Rhein, Maas and Schelde, precipitation and the nuclear reprocessing plant at La Hague (Channel). Below 32.5 PSU, the influence of the influx from the rivers Elbe, Weser and Ems becomes apparent. These rivers are less contaminated with tritium.Assuming that Cs-137 and tritium, like the salinity of sea water, behave conservatively and that the decay-time of these two isotopes is long compared with the time-scale of water exchange in the southern North Sea, the concentration values measured are used to calculate the structure of the water masses in the three areas of the German Bight mentioned above using the mixing principle. Evaporation is taken into account. Results show that beyond 34 PSU, about half the sea water originates in the western central North Sea while the other half comes from the Channel. Below 34 PSU, the first mentioned share amounts only to a few per cent. Results also show that fresh water from the Rhein delta and precipitation, increasing with a decrease in salinity from 34 to 32.5 PSU, accounts for a maximum of 5% each. The fresh water influx into the German Bight via the rivers Elbe, Weser and Ems amounts to app. 11% when the PSU value reaches 29. The calculated portions are the mean values for the observation period. The number of measurements available makes it impossible to distinguish more exactly between the temporal and spatial variability of the amounts of the individual components.The quantity of each calculated portion of sea water also represents the transfer factor of concentration between the nuclide concentration in the source (e. g. the Rhein) and the concentration in the German Bight. In addition, these factors are used to calculate the transfer factors of discharge using the annual drainage rates of the sources. Thus a radioactive discharge rate of 10¹⁵ Bq per year into the Rhein would produce a mean activity concentration of 0.34 Bq/l in the German Bight (at a salinity of 33.5 PSU). To verify the calculated transfer factors, tritium concentrations in the German Bight are derived from existing environmental tritium data and the results are compared with the values actually measured.

---

Transferkaktoren zwischen der Deutschen Bucht und ihren Zuflüssen abgeleitet aus der Tritium- und Cs-137-Aktivitätskonzentration in den beteiligten Gewässern

Zusammenfassung Eine zusammenhängende Auswertung der Meßergebnisse der Radioaktivitätsüberwachung in der südlichen Nordsee über den Zeitraum 1977 bis 1987 hat gezeigt, daß im Wasser der Deutschen Bucht deutlich drei durch den Salzgehalt des Meerwassers und die Konzentration der gelösten Radionuklide charakterisierte Bereiche zu unterscheiden sind.Während der Salzgehalt mit wachsender Entfernung von der Küste stetig zunimmt, steigt die Cs-137-Konzentration oberhalb 34 PSU (Practical Salinity Unit) sprunghaft an und signalisiert die Grenze, bis zu der das durch die Kernbrennstoff-Wiederaufarbeitung in Sellafield (Irische See) kontaminierte Meerwasser der westlichen und mittleren Nordsee in die Deutsche Bucht vordringt. Im Bereich 34 bis 32,5 PSU ist das von Westen zugeführte, stärker Tritium-kontaminierte Wasser aus Rhein, Maas, Schelde und atmosphärischem Niederschlag zu erkennen, an das sich unterhalb 32,5 PSU der geringer mit Tritum kontaminierte Zufluß aus Elbe, Weser und Ems anschließt.Davon ausgehend, daß sich Cs-137 und Tritium wie der Salzgehalt im Meerwasser konservativ verhalten und daß weiterhin die Halbwertzeit des radioaktiven Zerfalls dieser beiden Nuklide lang ist gegenüber den Wasseraustauschzeiten im betrachteten Meeresgebiet, wurden die in der südlichen Nordsee gemessenen sowie aus der Literatur für den Süßwasserbereich entnommenen Konzentrationswerte dazu genutzt, um rechnerisch mit Hilfe des Mischungsgesetzes den Wassermassenaufbau in den drei genannten Salinitätsbereichen in der Deutschen Bucht quantitativ zu bestimmen. Es zeigte sich, daß oberhalb von 34 PSU das Meerwasser aus etwa gleichen Teilen aus der westlichen/mittleren Nordsee und dem Kanal stammt, während unterhalb dieser Salzgehaltsgrenze nur noch mit wenigen Prozentanteilen Wasser aus der mittleren Nordsee zu finden ist. Ferner ergab sich, daß das aus dem Rheinmündungsbiet bzw, aus dem atmosphärischen Niederschlag stammende Süßwasser — mit sinkendem Salzgehalt steigend — bei 32,5 PSU einen maximalen Anteil von jeweils 5% an Meerwasser hat. Der direkte Süßwasserzufluß aus Elbe, Weser und Ems beträgt in die Deutsche Bucht bei 29 PSU ca. 11%.Die berechneten Anteile sind Mittelwerte über den gesamten Beobachtungszeitraum; die Anzahl der Messungen läßt eine genauere Unterscheidung in zeitliche und räumliche Variabilität der Zusammensetzung nicht zu.Die Größe des jeweils bestimmten Anteils am Meerwasser stellt gleichzeitig den Transferfaktor der Konzentration zwischen der Nuklidkonzentration im Ursprungsgewässer (z. B. dem Rhein) und der sich daraus einstellenden Konzentration in der Deutschen Bucht dar. Ferner wurden die Transferfaktoren der Konzentration in Verbindung mit aus der Literatur entnommenen Größen der jährlichen Abflußmengen der Ursprungsgewässer genutzt, um auch die Transferfaktoren der jährlichen Einbringung zu ermitteln. So ergibt die jährliche Einbringung von 10¹⁵ Bq eines Nuklides z. B. in den Rhein bei 33,5 PSU in der Deutschen Bucht eine mittlere Konzentration von 0,34 Bq/l.Als Anwendungsbeispiel und zur Überprüfung der Richtigkeit der Transferfaktoren wird die Auswertung des Tritiumauslasses bei La Hague auf die Deutsche Bucht berechnet und mit den gemessenen Werten verglichen.

     

Emerging Technologies and Synergies for Airborne and Space-Based Measurements of Water Vapor Profiles

A deeper understanding of how clouds will respond to a warming climate is one of the outstanding challenges in climate science. Uncertainties in the response of clouds, and particularly shallow clouds, have been identified as the dominant source of the discrepancy in model estimates of equilibrium climate sensitivity. As the community gains a deeper understanding of the many processes involved, there is a growing appreciation of the critical role played by fluctuations in water vapor and the coupling of water vapor and atmospheric circulations. Reduction of uncertainties in cloud-climate feedbacks and convection initiation as well as improved understanding of processes governing these effects will result from profiling of water vapor in the lower troposphere with improved accuracy and vertical resolution compared to existing airborne and space-based measurements. This paper highlights new technologies and improved measurement approaches for measuring lower tropospheric water vapor and their expected added value to current observations. Those include differential absorption lidar and radar, microwave occultation between low-Earth orbiters, and hyperspectral microwave remote sensing. Each methodology is briefly explained, and measurement capabilities as well as the current technological readiness for aircraft and satellite implementation are specified. Potential synergies between the technologies are discussed, actual examples hereof are given, and future perspectives are explored. Based on technical maturity and the foreseen near-mid-term development path of the various discussed measurement approaches, we find that improved measurements of water vapor throughout the troposphere would greatly benefit from the combination of differential absorption lidar focusing on the lower troposphere with passive remote sensors constraining the upper-tropospheric humidity.     

Inclined lidar observations of boundary layer aerosol particles above the Kongsfjord,Svalbard

An inclined lidar with vertical resolution of 0.4 m was used for detailed boundary layer studies and to link observations at Zeppelin Mountain (474 m) and Ny-Ålesund, Svalbard. We report on the observation of aerosol layers directly above the Kongsfjord. On 29 April 2007, a layer of enhanced backscatter was observed in the lowest 25 m above the open water surface. The low depolarization ratio indicated spherical particles. In the afternoon, this layer disappeared. The ultrafine particle concentration at Zeppelin and Corbel station (close to the Kongsfjord) was low. On 1 May 2007, a drying process in the boundary layer was observed. In the morning, the atmosphere up to Zeppelin Mountain showed enhanced values of the backscatter coefficient. Around noon, the top of the highly reflecting boundary layer decreased from 350 to 250 m. The top of the boundary layer observed by lidar was confirmed by radiosonde data.     

Heat Transport Processes in the Earth’s Crust

The heat of the Earth derives from internal and external sources. A heat balance shows that most of the heat provided by external sources is re-emitted by long-wavelength heat radiation and that the dominant internal sources are original heat and heat generated by decay of unstable radioactive isotopes. Understanding of the thermal regime of the Earth requires appreciation of properties and mechanisms for heat generation, storage, and transport. Both experimental and indirect methods are available for inferring the corresponding rock properties. Heat conduction is the dominant transport process in the Earth’s crust, except for settings where appreciable fluid flow provides a mechanism for heat advection. For most crustal and mantle rocks, heat radiation becomes significant only at temperatures above 1200°C.

Estimating the sediment trap efficiency of intermittently dry reservoirs: lessons from the Kruger National Park,South Africa

The assessment of sediment yield from reservoir siltation requires knowledge of the reservoir's sediment trap efficiency (TE). Widely used approaches for the estimation of the long‐term mean TE rely on the ratio of the reservoir's storage capacity (C) to its catchment size (A) or mean annual inflow (I). These approaches have been developed from a limited number of reservoirs (N ≤ 40), most of them located in temperate climate regions. Their general applicability to reservoirs receiving highly variable runoff such as in semi‐arid areas has been questioned. Here, we examine the effect of ephemeral inflow on the TE of 10 small (≤ 280 × 10³ m³), intermittently dry reservoirs located in the Kruger National Park. Fieldwork was conducted to determine the storage capacity of the reservoir basins. The frequency and magnitude of spillage events was simulated with the daily time step Pitman rainfall–runoff model. Different runoff scenarios were established to cope with uncertainties arising from the lack of runoff records and imperfect input data. Scenarios for the relationship between water and sediment discharge were created based on sediment rating curves. Taking into account uncertainties in hydrological modelling, uncertainties of mean TE estimates, calculated from all scenarios (N = 9), are moderate, ranging from ±6 to ±11% at the 95% confidence level. By comparison, estimating TE from the storage capacity to catchment area (C/A) ratio induces high uncertainty (ranges of 35 to 65%), but this uncertainty can be confined (15 to 33%) when the latter approach is combined with hydrological modelling. Established methods relying on the storage capacity to mean annual inflow (C/I) ratio most probably lead to an overestimation of the TE for the investigated reservoirs. The approach presented here may be used instead to estimate the TE of small, intermittently dry reservoirs in semi‐arid climate regions. Copyright © 2017 John Wiley & Sons, Ltd.     

A large sedimentary basin in the Terra Sirenum region of the southern highlands of Mars

Different lines of evidence point to hydrological cycling in the martian past. The extent, duration, and magnitude of this cycling remains unclear, as well as the magnitude of aqueous processes on the surface. Here, we provide geomorphic and mineralogic evidence of a large inter-crater sedimentary basin located in the Terra Sirenum region, which was once covered by a body of liquid water with an areal extent of at least 30,000 km² and a depth of approximately 200 m. The topographic basin, which is modified by a number of large impact craters, is partly controlled by ancient impact and tectonic structures. As a result of evaporation of the large body of water, salt flats formed in the lowest topographic reaches of the basin. Hydrated phyllosilicates occur in close proximity to the salt flats and in the ejecta and rim materials of small impact craters with stratigraphic relations that suggest that they underlie the evaporite deposits. Crater statistics place the maximum age of aqueous activity during the Late Noachian epoch. The relatively pristine mineral deposits in the basin have a high potential to yield information of the geochemistry and water activity during the ancient Noachian Period when conditions were seemingly more conducive to life.     

Late Quaternary growth and decay of the Svalbard/Barents Sea ice sheet and paleoceanographic evolution in the adjacent Arctic Ocean

The paleoceanography in the Nordic seas was characterized by apparently repeated switching on and off of Atlantic water advection. In contrast, a continous influx of Atlantic waters probably occurred along the northern Barents Sea margin during the last 150?ka. Temporary ice-free conditions enhanced by subsurface Atlantic water advection and coastal polynyas accelerated the final ice sheet build-up during glacial times. The virtually complete dissolution of biogenic calcite during interglacial intervals was controlled mainly by CO2-rich bottom waters and oxidation of higher levels of marine organic carbon and indicates intensive Atlantic water inflow and a stable ice margin.     

Assessing quality of volunteer crowdsourcing contributions: lessons from the Cropland Capture game

Volunteered geographic information (VGI) is the assembly of spatial information based on public input. While VGI has proliferated in recent years, assessing the quality of volunteer-contributed data has proven challenging, leading some to question the efficiency of such programs. In this paper, we compare several quality metrics for individual volunteers’ contributions. The data were the product of the ‘Cropland Capture’ game, in which several thousand volunteers assessed 165,000 images for the presence of cropland over the course of 6 months. We compared agreement between volunteer ratings and an image's majority classification with volunteer self-agreement on repeated images and expert evaluations. We also examined the impact of experience and learning on performance. Volunteer self-agreement was nearly always higher than agreement with majority classifications, and much greater than agreement with expert validations although these metrics were all positively correlated. Volunteer quality showed a broad trend toward improvement with experience, but the highest accuracies were achieved by a handful of moderately active contributors, not the most active volunteers. Our results emphasize the importance of a universal set of expert-validated tasks as a gold standard for evaluating VGI quality.     

Can GPS-Derived Surface Loading Bridge a GRACE Mission Gap?

We investigated two ‘gap-filler’ methods based on GPS-derived low-degree surface loading variations (GPS-I and GPS-C) and a more simple method (REF-S) which extends a seasonal harmonic variation into the expected Gravity Recovery and Climate Experiment (GRACE) mission gap. We simulated two mission gaps in a reference solution (REF), which is derived from a joint inversion of GRACE (RL05) data, GPS-derived surface loading and simulated ocean bottom pressure. The GPS-I and GPS-C methods both have a new type of constraint applied to mitigate the lack of GPS station network coverage over the ocean. To obtain the GPS-C solution, the GPS-I method is adjusted such that it fits the reference solution better in a 1.5 year overlapping period outside of the gap. As can be expected, the GPS-I and GPS-C solutions contain larger errors compared to the reference solution, which is heavily constrained by GRACE. Within the simulated gaps, the GPS-C solution generally fits the reference solution better compared to the GPS-I method, both in terms of spherical harmonic loading coefficients and in terms of selected basin-averaged hydrological mass variations. Depending on the basin, the RMS-error of the water storage variations (scaled for leakage effects) ranges between 1.6 cm (Yukon) and 15.3 cm (Orinoco). In terms of noise level, the seasonal gap-filler method (REF-S) even outperforms the GPS-I and GPS-C methods, which are still affected by spatial aliasing problems. However, it must be noted that the REF-S method cannot be used beyond the study of simple harmonic seasonal variations.