Preindustrial, historical, and fertilization simulations using a global ocean carbon model with new parameterizations of iron limitation, calcification, and N2 fixation

The Canadian Model of Ocean Carbon (CMOC) has been developed as part of a global coupled climate carbon model. In a stand-alone integration to preindustrial equilibrium, the model ecosystem and global ocean carbon cycle are in general agreement with estimates based on observations. CMOC reproduces global mean estimates and spatial distributions of various indicators of the strength of the biological pump; the spatial distribution of the air-sea exchange of CO₂ is consistent with present-day estimates. Agreement with the observed distribution of alkalinity is good, consistent with recent estimates of the mean rain ratio that are lower than historic estimates, and with calcification occurring primarily in the lower latitudes. With anthropogenic emissions and climate forcing from a 1850-2000 climate model simulation, anthropogenic CO₂ accumulates at a similar rate and with a similar spatial distribution as estimated from observations. A hypothetical scenario for complete elimination of iron limitation generates maximal rates of uptake of atmospheric CO₂ of less than 1 PgC y⁻¹, or about 11% of 2004 industrial emissions. Even a ‘perfect’ future of sustained fertilization would have a minor impact on atmospheric CO₂ growth. In the long term, the onset of fertilization causes the ocean to take up an additional 77 PgC after several thousand years, compared with about 84 PgC thought to have occurred during the transition into the last glacial maximum due to iron fertilization associated with increased dust deposition.     

Glacial stratigraphy of East and Central Jutland

Glaciostratigraphic investigations at one key locality (Haldum), 9 major and about 160 minor localities in East and Central Jutland, Denmark, together with laboratory work, have led to the establishment of a stratigraphy consisting of 10 till units, usually separated by meltwater deposits. The stratigraphy is in some degree supported by thermoluminescence datings. The complete sequence includes one till unit with associated meltwater deposits of Menapian age, three till units with intercalated meltwater deposits of Elsterian age, marine sediments deposited during the Holsteininan, and three till units with intercalated of Elsterian age, marine sediments deposited during the Holsteinian, and three till units with intercalated glaciofluvial sedimants of Saalian age. Eemian deposits are present above this level, and the whole sequence is capped by till and meltwater deposits related to three glacial advances during the Weichselian.     

The complex X-ray spectrum of the isolated neutron star RBS1223

We present a first analysis of a deep X-ray spectrum of the isolated neutron star RBS1223 obtained with XMM-Newton. Spectral data from four new monitoring observations in 2005/2006 were combined with archival observations obtained in 2003 and 2004 to form a spin-phase averaged spectrum containing 290 000 EPIC-pn photons. This spectrum shows higher complexity than its predecessors, and can be parameterised with two Gaussian absorption lines superimposed on a blackbody. The line centers, E ₂≃2E ₁, could be regarded as supporting the cyclotron interpretation of the absorption features in a field B∼4×10¹³ G. The flux ratio of those lines does not support this interpretation. Hence, either feature might be of truly atomic origin.      

Modelling observed and future runoff from a glacierized tropical catchment (Cordillera Blanca, Perú)

Monthly runoff from the 34.3% glacierized tropical catchment of Llanganuco in the tropical Cordillera Blanca, Perú, is successfully simulated and compared with a measured 44 year time series. In the investigation area, the climate is characterized by all-year round homogenous temperature conditions and a strong variability in air humidity and moisture content of the atmosphere. Thus, contrary to the mid latitudes, the seasonal variation in glacier melt strongly depends on moisture-related variables, rather than on air temperature. The here presented ITGG-2.0-R model aims for these requirements. The lack of moisture-related input data other than precipitation demands for an intermediate calibration step. Net shortwave radiation, the emissivity of the atmosphere and a sublimation/melt ratio are related to precipitation amounts. Runoff is well simulated and correlates with the measured record with r² = 0.76. Seasonally obtained r² are only slightly smaller. On a long-term, the cumulative deviation is minor, and the mean annual cycle of runoff is reproduced rather well (r² = 0.99). Based on four different IPCC climate change scenarios, future runoff is simulated. All runoff scenarios are modelled for the respective steady-state glacier extent. This leads to a reduction in the glacier size and a decreased amount of glacier melt. On the other hand, direct runoff increases due to larger glacier free areas. Consequently, mean annual runoff remains almost unchanged, but the seasonality intensifies considerably with more runoff during the wet and less runoff during the dry season.     

WASP-1b and WASP-2b: two new transiting exoplanets detected with SuperWASP and SOPHIE

We have detected low-amplitude radial-velocity variations in two stars, USNO-B1.0 1219–0005465 (GSC  02265–00107 = WASP–1  ) and USNO-B1.0 0964–0543604 (GSC  00522–01199 = WASP–2  ). Both stars were identified as being likely host stars of transiting exoplanets in the 2004 SuperWASP wide-field transit survey. Using the newly commissioned radial-velocity spectrograph SOPHIE at the Observatoire de Haute-Provence, we found that both objects exhibit reflex orbital radial-velocity variations with amplitudes characteristic of planetary-mass companions and in-phase with the photometric orbits. Line-bisector studies rule out faint blended binaries as the cause of either the radial-velocity variations or the transits. We perform preliminary spectral analyses of the host stars, which together with their radial-velocity variations and fits to the transit light curves yield estimates of the planetary masses and radii. WASP-1b and WASP-2b have orbital periods of 2.52 and 2.15 d, respectively. Given mass estimates for their F7V and K1V primaries, we derive planet masses 0.80–0.98 and 0.81–0.95 times that of Jupiter, respectively. WASP-1b appears to have an inflated radius of at least 1.33 R _Jup, whereas WASP-2b has a radius in the range 0.65–1.26 R _Jup.     

Methane evolution from UV-irradiated spacecraft materials under simulated martian conditions: Implications for the Mars Science Laboratory (MSL) mission

Fifteen organic and three inorganic compounds were tested for methane (CH₄) evolution under simulated martian conditions of 6.9 mbar; UVC (200-280 nm) flux of 4 W m⁻²; 20 °C; simulated optical depth of 0.1; and a Mars gas composition of CO₂ (95.3%), N₂ (2.7%), Ar (1.7%), O₂ (0.13%), and water vapor (0.03%). All three inorganic compounds (i.e., NaCl, CaCO₃, graphite) failed to evolve methane at the minimum detection level 0.5 ppm, or above. In contrast, all organic compounds evolved methane when exposed to UV irradiation under simulated martian conditions. The polycyclic aromatic hydrocarbon, pyrene, released the most methane per unit of time at 0.175 nmol CH₄ g⁻¹ h⁻¹, and a spectral reflectance target material used for the MER rovers and Phoenix lander released the least methane at 0.00065 nmol CH₄ cm⁻² h⁻¹. Methane was also released from UV-killed bacterial endospores of Bacillus subtilis. Although all organic compounds evolved methane when irradiated with UV photons under martian conditions, the concentrations of residual organics, biogenic signature molecules, and dead microbial cells should be relatively low on the exterior surfaces of the MSL rover, and, thus, not significant sources of methane contamination. In contrast, kapton tape was found to evolve methane at the rate of 0.00165 nmol CH₄ cm⁻² h⁻¹ (16.5 nmol m⁻² h⁻¹) under the UV and martian conditions tested. Although the evolution of methane from kapton tape was found to decline over time, the large amount of kapton tape used on the MSL rover (lower bound estimated at 3 m²) is likely to create a significant source of terrestrial methane contamination during the early part of the mission.     

Planar deformation features in quartz from impact‐produced polymict breccia of the Xiuyan crater,China

Abstract– The 1.8 km‐diameter Xiuyan crater is an impact structure in northeastern China, exposed in a Proterozoic metamorphic rock complex. The major rocks of the crater are composed of granulite, hornblendite, gneiss, tremolite marble, and marble. The bottom at the center of the crater covers about 100 m thick lacustrine sediments underlain by 188 m thick crater‐fill breccia. A layer of polymict breccia composed of clasts of granulite, gneiss, hornblendite, and fragments of glass as well as clastic matrix, occurs near the base, in the depth interval from 260 to 295 m. An investigation in quartz from the polymict breccia in the crater‐fill units reveals abundant planar deformation features (PDFs). Quartz with multiple sets of PDFs is found in clasts of granulite that consist of mainly quartz and feldspar, and in fine‐grained matrix of the impact‐produced polymict breccia. A universal stage was used to measure the orientation of PDFs in 70 grains of quartz from five thin sections made from the clasts of granulite of polymict breccia recovered at the depth of 290 m. Forty‐four percent of the quartz grains contain three sets of PDFs, and another 40% contain two sets of PDFs. The most abundant PDFs are rhombohedron forms of , , and with frequency of 33.5, 22.3, and 9.6%, respectively. A predominant PDF form of in quartz suggests a shock pressure >20 GPa. The occurrence of PDFs in quartz from the polymict breccia provides crucial evidence for shock metamorphism of target rocks and confirms the impact origin of this crater, which thus appears to be the first confirmed impact crater in China.