火山灰的提取及测试技术

同一次火山爆发产生的火山灰 ,能在广阔的区域内形成等时标志层 ,成为地层定年和对比的极有价值的工具。文中介绍了提取肉眼不可见火山灰的 4种方法 :烧失法、稀碱法、重液浮选法和酸化法 ,还介绍了火山玻璃的显微镜下识别技术及电子探针测试技术。     

Late Neogene loess deposition in southern Tarim Basin: tectonic and palaeoenvironmental implications

Uplift of the Tibetan Plateau during the late Cainozoic resulted in a thick apron of molassic sediments along the northern piedmonts of the Kunlun and Altyn Mountains in the southern Tarim Basin. Early Neogene sediments are characterised by sandstone, siltstone and red mudstone, representing floodplain to distal alluvial fan environments. The Early Pliocene Artux Formation consists of medium-grained sandstone and sandy mudstone with thin layers of fine pebbly gritstone. The Late Pliocene to Early Pleistocene Xiyu Formation is dominated by pebble to boulder conglomerate typical of alluvial fan debris flow deposits. Sedimentological investigation, together with grain size and chemical analyses of siltstone bands intercalated with sandstone and conglomerate in the Xiyu and Artux Formations, point to an aeolian origin, suggesting desertic conditions in the Tarim Basin by the Early Pliocene. The onset of aeolian sedimentation in the southern Tarim Basin coincided with uplift of the northern Tibetan Plateau inferred from the lithofacies change from fine-grained mudstone and sandstone to coarse clasts. Tibetan Plateau uplift resulted in the shift of sedimentary environments northwards into the southern Tarim Basin, and could well have triggered the onset of full aridity in the Taklimakan region as a whole.     

The origin of low δ18O granites and related rocks from the Seychelles

The 750-Ma Seychelles granites have whole-rock '¹⁸O values that range from -1.2 to +7.5‰. Differences in '¹⁸O values between quartz, feldspar and whole-rock for samples that have a range of '¹⁸O values suggest that these minerals are in magmatic equilibrium, and that the whole-rock '¹⁸O values were little affected by post-crystallization interaction with fluids. Two suites of granites (the Mahé type and the Praslin type) have previously been recognized on the basis of chemical and radiogenic isotope composition. The former have a mean whole-rock '¹⁸O value of 5.25ǂ.65‰ (1C), whereas the latter are much more variable, with a mean whole-rock '¹⁸O value of 3.00Dž.27‰. Biotite and amphibole separates from both granite types range in 'D from -69 to -116‰, and show a positive correlation with whole-rock '¹⁸O values. Dolerite dykes that intruded the granites during or shortly after their crystallization also have whole-rock '¹⁸O values (mean 2.24ǃ.93‰) lower than that expected for mantle-derived basaltic rocks, but these values appear to be the result of fluid-rock interaction. We suggest that the Mahé-type granites are derived mainly from juvenile mafic to intermediate crust with 'normal' 'D and '¹⁸O values, whereas the Praslin-type granites are mixtures of this source and older crust that acquired its low 'D and '¹⁸O values by extensive interaction with meteoric water at high temperature. It is unlikely that meteoric water sufficiently depleted in D and ¹⁸O was available at 750 Ma because of the relatively low latitude of the region at that time. We suggest that alteration of the source took place significantly before production of the granite magmas. Depletion in ¹⁸O of the Seychelles granites does not necessarily require a regional extensional tectonic setting at 750 Ma, as has been proposed.     

Multivariate Monitoring with GPS Observations and Auxillary Multisensor Data

In a multisensor measurement or monitorin environment, p variables are measured simultaneously. The measured data are correlated and can be monitored to identify special causes of variation in order to establish control and to obtain reference samples to use as a basis in determining the control limits for future observations. One common method is to construct a multivariate control chart based on Hotelling's T² statistic. When the monitoring process is at the start-up stage, F and chi-square distributions are used to construct the necessary control limits. An example from a seven-day GPS data sample measured concurrently with the accelerometer response, wind velocity and temperature illustrates that this technique can improve the interpretation of GPS results. Moreover, the computational complexity is reduced through a reduction in the data dimensionality. ? 2002 Wiley Periodicals, Inc.     

Role of water in the origin of podiform chromitite deposits

We report experiments in basalt oversaturated with water to duplicate the nodular ore textures of podiform chromitite ores. In immiscible basalt-water systems saturated with olivine and chromite, olivine will reside in the melt while chromite will collect in the fluid phase. Fractionation is physical and is driven by differential wetting properties of melt and fluid against silicate and oxide surfaces. There is no need to suppress olivine from the liquidus of a primitive basaltic melt as suggested by Irvine [Irvine, T.N., Geology 5 (1977) 273-277], to achieve chromite accumulations as observed in natural podiform ore deposits. The results imply that podiform chromitite ores will form where a primitive olivine-chromite-saturated mantle melt is sufficiently water-rich to exsolve a fluid phase during passage through the uppermost mantle. The most likely geodynamic environment for podiform chromite mineralization to take place is a supra-subduction zone setting.     

Estimating past leaf-to-air vapour pressure deficit from terrestrial plant δ13C

δ¹³C was determined in lignin extracted from present-day cladodes of Phyllocladus alpinus (a small coniferous tree) from seven well-lit sites across New Zealand. The δ¹³C values ranged from −30.9‰ to −23.6‰ and were compared with monthly means of temperature, precipitation, relative humidity and vapour pressure deficit from the nearest recording stations. Of these parameters, the leaf-to-air vapour pressure deficit of the first month of cladode growth and expansion proved to be the most significantly correlated with lignin δ¹³C, over a range of 0.3 to 0.8 kPa, confirming the importance of atmospheric moisture content on stomatal conductance. The carbon isotopic signature of lignin from fossilised cladodes preserved under the Kawakawa Tephra (22.6 k ¹⁴C yr BP) on the North Island is identical to that of the whole tissue, suggesting that for this species at least, fossil material can be used to approximate the lignin δ¹³C. The δ¹³C of species- and organ-specific fossil terrestrial plant material therefore provides an excellent method to quantify past changes in leaf-to-air vapour pressure deficit. Copyright © 1999 John Wiley & Sons, Ltd.     

A power-law-based approach to mapping COVID-19 cases in the United States

This paper examines the spatial and temporal distribution of all COVID-19 cases from January to June 2020 against the underlying distribution of population in the United States. It is found that, as time passes, COVID-19 cases become a power law with cutoff, resembling the underlying spatial distribution of populations. The power law implies that many states and counties have a low number of cases, while only a few highly populated states and counties have a high number of cases. To further differentiate patterns between the underlying populations and COVID-19 cases, we derived their inherent hierarchy or spatial heterogeneity characterized by the ht-index. We found that the ht-index of COVID-19 cases persistently approaches that of the populations; that is, 5 and 7 at the state and county levels, respectively. Mapping the ht-index of COVID-19 cases against that of populations shows that the pandemic is largely shaped by the underlying population with the R-square value between infection and population up to 0.82.     

A Flux Detection Probe to Quantify Dynamic Groundwater-Surface Water Exchange in the Hyporheic Zone

A new probe was designed to quantify groundwater-surface water exchange in the hyporheic zone under dynamic stage condition. Current methods focus on either vertical pore water velocity or Darcy flux measurements. Both parameters must be understood to evaluate residence time and mass flux of constituents. Furthermore, most instruments are not well suited for monitoring instantaneous velocity or flux under dynamic exchange conditions. For this reason, the flux detection probe (FDP) was designed that employs electrogeophysical measurements to estimate in situ sediment porosity, which can be used to convert pore water velocity to Darcy flux. Dynamic pore water velocity is obtained by monitoring fluid conductivity and temperature along the FDP probe. Pressure sensors deployed at the top and bottom of the probe provide the additional information necessary to estimate vertical permeability. This study focuses on the use of a geophysical method to estimate pore water velocity, porosity, and permeability within a controlled soil column where simulated river water displaces simulated groundwater. The difference between probe derived and theoretical pore water velocity using natural tracers such as electrical conductivity and temperature was −4.9 and 3.9% for downward flow and 1.1 and 12.8% for upward flow, respectively. The difference in porosity calculated from mass and volume packed in the soil column and probe measure porosity ranged between −3.2% and 1.5%. Also, the calculated hydraulic conductivity differed from probe derived values by −8.9%.     

Using the size and position of drumlins to understand how they grow,interact and evolve

Drumlins are subglacial bedforms streamlined in the direction of ice flow. Common in deglaciated landscapes, they have been widely studied providing rich information on their internal geology, size, shape, and spacing. In contrast with bedform investigations elsewhere in geomorphology (aeolian and fluvial dunes and ripples for example) most drumlin studies derive observations from relict, and thus static features. This has made it difficult to gain information and insights about their evolution over time, which likely hampers our understanding of the process(es) of drumlin formation. Here we take a morphological approach, studying drumlin size and spacing metrics. Unlike previous studies which have focussed on databases derived from entire ice sheet beds, we adopt a space‐for‐time substitution approach using individual drumlin flow‐sets distributed in space as proxies for different development times/periods. Framed and assisted by insights from aeolian and fluvial geomorphology, we use our metric data to explore possible scenarios of drumlin growth, evolution and interaction. We study the metrics of the size and spacing of 36 222 drumlins, distributed amongst 71 flow‐sets, left behind by the former British‐Irish Ice Sheet, and ask whether behaviour common to other bedform phenomena can be derived through statistical analysis. Through characterizing and analysing the shape of the probability distribution functions of size and spacing metrics for each flow‐set we argue that drumlins grow, and potentially migrate, as they evolve leading to pattern coarsening. Furthermore, our findings add support to the notion that no upper limit to drumlin size exists, and to the idea that perpetual coarsening could occur if given sufficient time. We propose that the framework of process and patterning commonly applied to non‐glacial bedforms is potentially powerful for understanding drumlin formation and for deciphering glacial landscapes. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Yet another moment-tensor parameterization

The source mechanism of a microseismic event, or any small earthquake, can be described by its moment tensor. The source type is described by a 3-vector formed from the ordered, principal (eigen) values of the moment tensor and the source orientation from the normalized eigenvectors. The direction and magnitude of the principal-value vector describe the source type and scalar moment, respectively. The source type can be described by the position of the principal-value vector on the permitted lune of a unit sphere. As with any projection or cartography mapping, many parameterizations have been suggested to describe this position. Two dominate in the literature – the Riedesel–Jordan and Hudson–Pearce–Rogers parameters. All have advantages and disadvantages. In this paper, we review the most popular parameterizations, illustrating their similarities and the distortion they cause in the mapping between a uniform distribution of source types in the permitted lune and the parameter space. A new parameterization is suggested based on the solid angles formed by the principal-value vector. This has the advantage of being simple to define geometrically in the principal-value space (although the formulae are complicated), being naturally normalized and having a more uniform mapping than other parameterizations. However, we do not claim that this is the best or ideal parameterization, just a reasonable choice.