New ophiolite occurrences in Sudan and constraint on the western boundary of the Nubian Shield: Petrographical and geochemical evidence

Important mafic–ultramafic masses have been located for the first time in the intersection area between the Keraf Shear Zone and the Nakasib Suture Zone of the Nubian Shield. The masses, comprising most of the members of the ophiolite suite, are Sotrebab and Qurun complexes east of the Nile, and Fadllab complex west of the Nile. The new mafic–ultramafic masses are located on the same trend of the ophiolitic masses decorating the Nakasib Suture. A typical complete ophiolite sequence has not been observed in these complexes, nevertheless, the mafic–ultramafic rocks comprise basal unit of serpentinite and talc chlorite schists overlain by a thick cumulate facies of peridotites, pyroxenites and layered gabbros overlain by basaltic pillow lavas with dolerite dykes and screens of massive gabbros. Associated with pillow lavas are thin layers of carbonates and chert. The best section of cumulate mafic–ultramafic units has been observed in Jebel Qurun and El Fadlab complexes, comprising peridotites, pyroxenites and layered gabbros. Dolerite dykes and screens of massive gabbros have been observed with basaltic pillow lava sections in Wadi Dar Tawaiy. The basal ultramafic units of the complexes have been fully or partly retrograded to chlorite magnetite schist and talc to talc-carbonate rocks (listowenites), especially in the Jebel Qurun and Sotrebab complexes. Petrographically, the gabbros (layered and massive) and the basaltic pillow lavas show mineral assemblages of epidote amphibolite facies. The mafic members from the three complexes show a clear tholeiitic trend and oceanic floor affinity. The pillow lavas plot in the field of oceanic floor basalt, namely in the back arc field. Primitive mantle normalized spider diagram of the pillow lavas reveals a closer correspondence to Enrich-Mid-Oceanic Ridge Basalt (E-MORB) type, which is confirmed by the flat chondrite normalized Rare Earth Elements (REE) pattern. Field, petrographical and geochemical evidence supports ophiolitic origin of the three complexes. The newly discovered ophiolitic complexes mark the western continuation of the Nakasib Suture Zone.     

Site amplification investigation in Dhaka, Bangladesh, using H/V ratio of microtremor

The degree of damage during earthquakes strongly depends on dynamic characteristics of buildings as well as amplification of seismic waves in soils. Among the other approaches, microtremor is, perhaps, the easiest and cheapest way to understand the dynamic characteristics of soil. Non-reference microtremor measurements have been carried out in 45 locations in and around the capital Dhaka city of Bangladesh. Subsoil investigations (Standard Penetration Test and Shear Wave Velocity) have also been executed in those locations. Soil model has been developed for those locations for site response analysis by means of the program SHAKE. Among those 45 locations, predominant frequency of microtremor observation varies from 0.48 to 3.65 Hz. Out of those 45, for 35 locations Transfer function obtained from the program SHAKE have higher frequency compared to microtremor H/V ratio and for one location it has lower predominant frequency. For six locations, frequencies obtained from two methods are identical. For three other locations, there are no similarities between predominant frequency obtained from microtremor and transfer function. The seismic Vulnerability Index (Kg) for 45 sites varies between 0.45 and 31.85. Ten sites have been identified as having moderate vulnerability of soil layers to deform.     

Hawking non-thermal and thermal radiations of Schwarzschild anti-de Sitter black hole by Hamilton-Jacobi method

The massive particles tunneling method has been used to investigate the Hawking non-thermal and purely thermal radiations of Schwarzschild Anti-de Sitter (SAdS) black hole. Considering the spacetime background to be dynamical, incorporate the self-gravitation effect of the emitted particles the imaginary part of the action has been derived from Hamilton-Jacobi equation. Using the conservation laws of energy and angular momentum we have showed that the non-thermal and purely thermal tunneling rates are related to the change of Bekenstein-Hawking entropy and the derived emission spectrum deviates from the pure thermal spectrum. The result obtained for SAdS black hole is also in accordance with Parikh and Wilczek’s opinion and gives a correction to the Hawking radiation of SAdS black hole.     

Rice Husk Ash as a Low Cost Adsorbent for the Removal of Methylene Blue and Congo Red in Aqueous Phases

Adsorption is of significant importance for effluent treatment, especially for the treatment of colored effluent generated from the dyeing and bleaching industries. Low cost adsorbents have gained attention over the decades as a means of achieving very high removal efficiencies to meet effluent discharge standards. The present article reports on batch investigations for color removal from aqueous solutions of Methylene Blue (MB) and Congo Red (CR) using Rice Husk Ash (RHA) as an alternative low cost adsorbent. The performance analysis was carried out as a function of various operating parameters, such as initial concentration of dye, adsorbent dose, contact time, shaker speed, interruption of shaking and ionic concentration. Performance studies revealed that a very high percentage removal of color was achievable for both dyes. The maximum percentage removal of MB was 99.939%, while 98.835% removal was observed for CR. These percentage removals were better than existing systems. Detailed data analysis indicated that adsorption of MB followed the Temkin isotherm, while CR followed the Freundlich isotherm. These isotherms were feasible within the framework of experimentation. Batch kinetic data, on the other hand, indicated that pseudo second order kinetics governed adsorption in both cases. Sensitivity analysis further indicated that the effects of initial dye concentration, shaker speed, pH and ionic strength had no noticeable effect on the percentage dye removal at equilibrium. Batch desorption studies revealed that 50% acetone solution was optimum for CR, while desorption of MB varied directly with acetone concentration.     

Environmental impact assessment on water quality deterioration caused by the decreased Ganges outflow and saline water intrusion in south-western Bangladesh

 This paper deals with an environmental impact assessment of low water flow in the river Ganges during a dry period at the Khulna and Mongla port areas in south-western Bangladesh. Large-scale surface water withdrawal in India after commissioning the Farakka Barrage causes a drastic fall in the Ganges low-flow condition within the Bangladesh territory during every dry period. The average lowest discharge in the Ganges is 552 m³/s, which is about 73% less than that in the pre-Farakka time. This has caused the deterioration of both surface and groundwater quality of the study area. Salinity is the principal cause of water quality degradation in the area. Present observation shows that the surface water of the area is sulphate-chloride dominated, which signifies high salinity whereas the groundwater is categorized as of medium to high salinity. To maintain the Rupsa River's maximum salinity below 1000 μS/cm the discharge in the Ganges should be ∼1500 m³/s, whereas that at Garai basin is ∼10 m³/s. If this present situation continues it will be a crippling blow to the environment of the area in the long term. An integrated multidisciplinary approach to hydrogeological research is urgently required to salvage the area from further deterioration. Received: 9 August 1999 · Accepted: 8 March 2000     

Mineralogy and chemical composition of the clay fraction of Neogene shales from the Surma Group in the Bengal basin,Bangladesh

Mineralogical and chemical investigations (<2μm clay separates) of shale samples from the Neogene-age Surma Group obtained from four wells (Habiganj-11, Shahbazpur-1, Titas-11, Titas-15) in the Bengal basin, Bangladesh, were carried out in order to reveal the clay mineral composition as reservoir exploration and exploitation requires a good understanding of the clay minerals. The samples were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-Ray fluorescence spectrometry (XRF). Mineralogically, the sub-surface Surma Group shales comprise predominantly quartz, plagioclase, illite, chlorite, kaolinite, with lesser amounts of K-feldspar, dolomite and smectite, and minor to trace amounts of calcite, siderite and pyrite. The chemical composition of the <2 μm clay separates also suggests an illite and chlorite-rich composition. With increasing burial depth, the Surma Group shales are enriched in illite. The gradual decreasing of the smectite clays with depth and ultimate disappearance at greater depths (≥ 3000 m) may have been responsible for the presence of the diagenetic illite. Based on the mineralogical composition it is most likely that the illite-chlorite associations together with quartz and feldspar were predominantly detrital in origin and thus reflect the presence of a rapidly-rising source terrain not subjected to intense weathering.     

Development of Tide–Surge Interaction Model for the Coastal Region of Bangladesh

In this paper, a two-dimensional, vertically integrated hydrodynamic model is developed taking into account entrained air bubbles during storm surges as well as incorporating inverted barometer, and river and land dynamics. The model is specifically designed for the coastal region of Bangladesh. A nested scheme method with a fine mesh scheme (FMS), capable of incorporating the complex coastline and all major offshore islands accurately, nested into a coarse mesh scheme (CMS) covering up to 15° N latitude in the Bay of Bengal is used. To incorporate the small and big offshore islands in the Meghna estuarine region with its complex coastline accurately, a very fine mesh scheme (VFMS) is again nested into the FMS. Along the northeast corner of the VFMS, the Meghna river discharge is taken into account. The coastal and island boundaries are approximated through proper stair steps. The model equations are solved by a semi-implicit finite difference technique using a staggered C-grid. A stable appropriate tidal condition over the model domain is generated by applying tidal forcing with the four major tidal constituents M ₂, S ₂, K ₁, and O ₁ along the southern open boundary of the CMS. This tidal regime is introduced as the initial state of the sea for nonlinear interaction of tide and surge. The model is applied to simulate water levels due to the interaction of tide and surge associated with the cyclones April 1991 and Aila at different coastal and island locations along the coast of Bangladesh. The results are found to be quite satisfactory with root mean square error of ～0.50 m as calculated for both the storm events. Tests of sensitivities on water levels are carried out for air bubbles, offshore islands, river discharge, inverse barometer, and grid resolution. The presence of air bubbles increases simulated water levels a little bit in our model, and the contribution of air bubbles in increasing water level is found around 2 %. Further, water levels are found to be influenced by offshore islands, river discharge, inverse barometer as well as grid resolution.     

Effectiveness of Mg–Al-layered double hydroxide for heavy metal removal from mine wastewater and sludge volume reduction

Health hazards from heavy metal pollution in water systems are a global environmental problem. Of similar concern is sludge that results from wastewater treatment due to unsatisfactory sludge management technology. Therefore, the effectiveness of using Mg–Al-layered double hydroxide in the removal of heavy metals from mine wastewater was tested and compared with that of calcium hydroxide [Ca(OH)₂], which is a common treatment method for heavy metal removal. Initially, the mine wastewater contained cations of the heavy metals iron (Fe), zinc (Zn), copper (Cu), and lead (Pb). The Mg–Al-layered double hydroxides were able to remove 371, 7.2, 121, and 0.4 mg/L of these pollutants, respectively, using the co-precipitation method. The removal of these metals is most effective using 0.5 g Mg–Al-layered double hydroxide (Mg/Al molar ratio 4) and 20 min of shaking. Zn was removed by the formation of Zn(NO₃)(OH)·H₂O and Zn₅(NO₃)₂(OH)₈ when LDH, Mg/Al molar ratios of 4 and 2, respectively, were used. Similarly, Fe, Cu, and Pb were removed by the formation of Fe–Al-layered double hydroxide, Cu₂(OH)₃·NO₃ and Pb₄(OH)₄(NO₃)₄, respectively. While Ca(OH)₂ is also capable of reducing the heavy metal concentrations below the Japanese recommended values, this analysis shows that using 0.5 g Mg–Al-layered double hydroxide is a better treatment condition for mine wastewater, because it generates lower sludge volumes than 0.1 g of Ca(OH)₂. The measured sludge volume was 1.5 mL for Mg–Al-layered double hydroxide and 2.5 mL for Ca(OH)₂, a nearly twofold further reduction.     

Response of porous beds subjected to random waves

A general analysis procedure is developed for the evaluation of the effective stress response of a porous ocean bed subjected to random waves. The ocean floor soil is treated as a saturated porous elastic medium and Biot's theory is used to formulate the coupled flow and deformation. The waves are treated as a random process which is described by Pierson–Moskowitz spectrum. The derived statistical properties of the response are used to evaluate the probability of failure in ocean bed.     

Control of porosity on durability of limestone at the great sphinx,Egypt

The study of the porosimetric data obtained from intrusion, extrusion, and reintrusion of mercury in limestone samples from the region of the sphinx reveals the characteristics of the pore system and allows analysis of durability factors.The pore system in all these rocks consists of ink-bottle pores. As the initial intrusion and extrusion have been completed, some mercury always remains in the sample. This trapped mercury represents the volume of large voids of the ink-bottle pore system. The distribution of the volume of the narrow throats of this system is revealed by the reintrusion curves.The curves obtained by plotting extrusion and reintrusion volumes against corresponding pressures enclose a loop. These curves relate to pore throats only. As entrapment of mercury does not occur in these pores, their distribution frequency and sorting seem to cause this hysteresis.The pressure/volume data also have been interpreted in terms of work needed to inject and extrude mercury from the pores. This thermodynamic analysis of the data has provided an additional, although less well-defined, means to characterize the porous stones.We have used in this study the model-dependent pore-size distributions and model-independent thermodynamic properties to develop durability factors. The factors based upon the combination of pore sizes in the range of <0.5, 0.5-5, and >5 µm precisely fit the observed durability of limestones at the sphinx, some of which have been exposed for more than 5,000 yr to the ambient atmosphere.