铜镍硫化物铼-锇标准物质定值的溯源性讨论及总不确定度评估

对按国家一级标准物质技术规范研制的铜镍硫化物Re-Os标准物质定值的溯源性及其总不确定度进行讨论与评估。铜镍硫化物标准物质样品采用Carius管溶解,高精度的TRITON同位素质谱仪、MAT-262热电离质谱仪、四极杆等离子体质谱仪、多接收器等离子体质谱仪和高分辨四极杆等离子体质谱仪测量Re、Os含量和Os同位素比值,其中Re-Os含量可以溯源至基准物质,而187Os/188Os同位素比值可以溯源至国际纯粹与应用化学联合会(IUPAC)。在定值数据误差计算时,采用国际通用的ISOPLOT软件利用加权的方法对数据进行处理;在合成总不确定度时,考虑了物质的均匀性和稳定性,同时考虑了稀释剂标定和同位素丰度以及称量误差等影响测定因素的不确定度。标准值的不确定度由三部分组成:第一部分是通过所有参与定值数据,采用ISOPLOT软件,利用加权的方法对数据进行计算处理得到的不确定度;第二部分是物质的均匀性和稳定性的不确定度;第三部分是影响测定其他因素的不确定度。     

Climatic change and Chinese population growth dynamics over the last millennium

The climate–population relationship has long been conceived. Although the topic has been repeatedly investigated, most of the related works are Eurocentric or qualitative. Consequently, the relationship between climate and population remains ambiguous. In this study, fine-grained temperature reconstructions and historical population data sets have been employed to statistically test a hypothesized relationship between temperature change and population growth (i.e., cooling associated with below average population growth) in China over the past millennium. The important results were: (1) Long-term temperature change significantly determined the population growth dynamics of China. However, spatial variation existed, whilst population growth in Central China was shown to be responsive to both long- and short-term temperature changes; in marginal areas, population growth was only sensitive to short-term temperature fluctuations. (2) Temporally, the temperature–population relationship was obscured in some periods, which was attributable to the factors of drought and social buffers. In summary, a temperature–population relationship was mediated by geographic factors, the aridity threshold, and social factors. Given the upcoming threat posed by climate change to human societies, this study seeks to improve our knowledge and understanding of the climate–society relationship.     

A Parameterization of Dry Thermals and Shallow Cumuli for Mesoscale Numerical Weather Prediction

For numerical weather prediction models and models resolving deep convection, shallow convective ascents are subgrid processes that are not parameterized by classical local turbulent schemes. The mass flux formulation of convective mixing is now largely accepted as an efficient approach for parameterizing the contribution of larger plumes in convective dry and cloudy boundary layers. We propose a new formulation of the EDMF scheme (for Eddy Diffusivity\Mass Flux) based on a single updraft that improves the representation of dry thermals and shallow convective clouds and conserves a correct representation of stratocumulus in mesoscale models. The definition of entrainment and detrainment in the dry part of the updraft is original, and is specified as proportional to the ratio of buoyancy to vertical velocity. In the cloudy part of the updraft, the classical buoyancy sorting approach is chosen. The main closure of the scheme is based on the mass flux near the surface, which is proportional to the sub-cloud layer convective velocity scale w _*. The link with the prognostic grid-scale cloud content and cloud cover and the projection on the non- conservative variables is processed by the cloud scheme. The validation of this new formulation using large-eddy simulations focused on showing the robustness of the scheme to represent three different boundary layer regimes. For dry convective cases, this parameterization enables a correct representation of the countergradient zone where the mass flux part represents the top entrainment (IHOP case). It can also handle the diurnal cycle of boundary-layer cumulus clouds (EUROCS\ARM) and conserve a realistic evolution of stratocumulus (EUROCS\FIRE).     

Turbulent Transfer Between Street Canyons and the Overlying Atmospheric Boundary Layer

The turbulent exchange of momentum between a two-dimensional cavity and the overlying boundary layer has been studied experimentally, using hot-wire anemometry and particle image velocimetry (PIV). Conditions within the boundary layer were varied by changing the width of the canyons upstream of the test canyon, whilst maintaining the square geometry of the test canyon. The results show that turbulent transfer is due to the coupling between the instabilities generated in the shear layer above the canyons and the turbulent structures in the oncoming boundary layer. As a result, there is no single, unique velocity scale that correctly characterizes all the processes involved in the turbulent exchange of momentum across the boundary layer. Similarly, there is no single velocity scale that can characterize the different properties of the turbulent flow within the canyon, which depends strongly on the way in which turbulence from the outer flow is entrained into the cavity and carried round by the mean flow. The results from this study will be useful in developing simple parametrizations for momentum exchange in the urban canopy, in situations where the street geometry consists principally of relatively long, uniform streets arranged in grid-like patterns; they are unlikely to be applicable to sparse geometries composed of isolated three-dimensional obstacles.     

Experimental Investigation of Turbulent Momentum Transfer in a Neutral Boundary Layer over a Rough Surface

The turbulent characteristics of the neutral boundary layer developing over rough surfaces are not well predicted with operational weather-forecasting models. The problem is attributed to inadequate mixing-length models, to the anisotropy of the flow and to a lack of controlled experimental data against which to validate numerical studies. Therefore, in order to address directly the modelling difficulties for the development of a neutral boundary layer over rough surfaces, and to investigate the turbulent momentum transfer of such a layer, a set of hydraulic flume experiments were carried out. In the experiments, the mean and turbulent quantities were measured by a particle image velocimetry (PIV) technique. The measured velocity variances and fluxes \({(\overline{{u_{i}^{\prime}}{u_{j}^{\prime}}})}\) in longitudinal vertical planes allowed the vertical and longitudinal gradients (?/?z and ?/?x) of the mean and turbulent quantities (fluxes, variances and third-order moments) to be evaluated and the terms of the evolution equations for ?e/?t, \({\partial \overline{u^{\prime 2}}/\partial t}\), \({\partial \overline{w^{\prime 2}}/\partial t}\) and \({\partial \overline{{u^{\prime}}{w^{\prime}}}/\partial t}\) to be quantified, where e is the turbulent kinetic energy. The results show that the pressure-correlation terms allow the turbulent energy to be transferred equitably from \({\overline{{u^{\prime}}^{2}}}\) to \({\overline{{w^{\prime}}^{2}}}\). It appears that the repartition between the constitutive terms of the budget of e, \({\overline{{u^{\prime}}^{2}}}\), \({\overline{{w^{\prime}}^{2}}}\) and \({\overline{{u^{\prime}}{w^{\prime}}}}\) is not significantly affected by the development of the rough neutral boundary layer. For the whole evolution, the transfers of energy are governed by the same terms that are also very similar to the smooth-wall case. The PIV measurements also allowed the spatial integral scales to be computed directly and to be compared with the dissipative and mixing length scales, which were also computed from the data.     

Scaling of Wall-Normal Turbulence Intensity and Vertical Eddy Structures in the Atmospheric Surface Layer

Adequate high-quality data on three-dimensional velocities in the atmospheric surface layer (height \(\delta \)) were acquired in the field at the Qingtu Lake Observation Array. The measurement range occupies nearly the entire logarithmic layer from approximately \(0.006\delta \)–\(0.2\delta \). The turbulence intensity and eddy structures of the velocity fluctuations in the logarithmic region were primarily analyzed, and their variations in the z (wall-normal) direction were revealed. The primary finding was that the turbulent intensity of wall-normal velocity fluctuations exhibits a sharp upswing in the logarithmic region, which differs from classic scaling law and laboratory results. The upswing of the wall-normal turbulence intensity in the logarithmic region is deemed to be linear based on an ensemble of 20 sets of data. In addition, the wall-normal extent of the correlated structures and wall-normal spectra were compared to low Reynolds number results in the laboratory.     

Development of statistical seasonal prediction models of Arctic Sea Ice concentration using CERES absorbed solar radiation

Statistical seasonal prediction models for the Arctic sea ice concentration (SIC) were developed for the late summer (August-October) when the downward trend is dramatic. The absorbed solar radiation (ASR) at the top of the atmosphere in June has a significant seasonal leading role on the SIC. Based on the lagged ASR-SIC relationship, two simple statistical models were established: the Markovian stochastic and the linear regression models. Crossvalidated hindcasts of SIC from 1979 to 2014 by the two models were compared with each other and observation. The hindcasts showed general agreement between the models as they share a common predictor, ASR in June and the observed SIC was well reproduced, especially over the relatively thin-ice regions (of one- or multi-year sea ice). The robust predictability confirms the functional role of ASR in the prediction of SIC. In particular, the SIC prediction in October was quite promising probably due to the pronounced icealbedo feedback. The temporal correlation coefficients between the predicted SIC and the observed SIC were 0.79 and 0.82 by the Markovian and regression models, respectively. Small differences were observed between the two models; the regression model performed slightly better in August and September in terms of temporal correlation coefficients. Meanwhile, the prediction skills of the Markovian model in October were higher in the north of Chukchi, the East Siberian, and the Laptev Seas. A strong non-linear relationship between ASR in June and SIC in October in these areas would have increased the predictability of the Markovian model.     

大敦煌地区水资源承载力及其承载状态评价（英文）

水资源承载力是衡量区域内人水关系协调发展的重要评判指标。定量评价水资源承载力,可为有效调控水资源、维持经济社会可持续发展提供重要依据。基于大敦煌地区各市县统计数据,以分县为基本单元,定量分析了2010–2017年不同来水条件和不同政策约束下大敦煌地区水资源承载力和承载状态。结果表明：（1）2010–2017年大敦煌地区水资源承载力逐年增加,平水年、枯水年和特枯年条件下的承载力分别从34.37万人、31.59万人和29.11万人增加到45.87万人、41.54万人和37.56万人。（2）不同政策约束下,2010–2017年大敦煌地区水资源承载力逐年增加,从2010年的30.94万人增加到2017年的41.24万人;预估2020年和2030年分别可承载人口32.66万人和34.12万人。（3）2010–2017年大敦煌地区水资源承载指数持续减小,平水年、枯水年和特枯年条件下承载指数分别从1.05、1.14和1.24降到0.80、0.88和0.97,人水关系均从临界超载转变为平衡有余。大敦煌地区水资源承载力显著提升,承载状态显著改善,但整体承载上限并不高,应着力提高水资源利用效率,以维持大敦...     

Some Insights into Topographic,Elastic and Self-gravitation Interaction in Modelling Ground Deformation and Gravity Changes in Active Volcanic Areas

Surface displacements and gravity changes due to volcanic sources are influenced by medium properties. We investigate topographic, elastic and self-gravitation interaction in order to outline the major factors that are significant in data modelling. While elastic-gravitational models can provide a suitable approximation to problems of volcanic loading in areas where topographic relief is negligible, for prominent volcanoes the rough topography could affect deformation and gravity changes to a greater extent than self-gravitation. This fact requires the selection, depending on local relief, of a suitable model for use in the interpretation of surface precursors of volcanic activity. We use the three-dimensional Indirect Boundary Element Method to examine the effects of topography on deformation and gravity changes in models of magma chamber inflation/deflation. Topography has a significant effect on predicted surface deformation and gravity changes. Both the magnitude and pattern of the geodetic signals are significantly different compared to half-space solutions. Thus, failure to account for topographic effects in areas of prominent relief can bias the estimate of volcanic source parameters, since the magnitude and pattern of deformation and gravity changes depend on such effects.     

UV attenuation in the cloudy atmosphere

Ultraviolet (UV) energy absorption plays a very important role in the Earth–atmosphere system. Based on observational data for Beijing, we suggest that some atmospheric constituents utilize or transfer UV energy in chemical and photochemical (C&P) reactions, in addition to those which absorb UV energy directly. These constituents are primarily volatile organic compounds (VOCs) emitted from both vegetative and anthropogenic sources. The total UV energy loss in the cloudy atmosphere for Beijing in 1990 was 78.9 Wm⁻². This attenuation was caused by ozone (48.3 Wm⁻²), other compounds in the atmosphere (26.6 Wm⁻²) and a scattering factor (4.0 Wm⁻²). Our results for a cloudy atmosphere in the Beijing area show that the absorption due to these other compounds occurs largely through the mediation of water vapor. This fraction of energy loss has not been fully accounted for in previous models. Observations and previous models results suggest that 1) a cloudy atmosphere absorbs 25∼30 Wm⁻² more solar shortwave radiation than models predict; and 2) aerosols can significantly decrease the downward mean UV-visible radiation and the absorbed solar radiation at the surface by up to 28 and 23 Wm⁻², respectively. Thus, quantitative study of UV and visible absorption by atmospheric constituents involved in homogeneous and heterogeneous C&P reactions is important for atmospheric models.