A generic scattering model for AGN

I present a development of the scattering model of Young et al. that can reproduce the velocity resolved polarization of the scattered broad lines, along with the continuum polarization of AGN. Two possible emission models are presented, namely a rotating disc and a radially expanding shell of emission. Using known, or expected, scattering regions present in AGN it is possible to reproduce the polarization observed to be present in type 1 and type 2 active galaxies.
The use of the model is illustrated by its application of the spectropolarimetric observations of the Seyfert 1 galaxy, Mrk 509. By a simple alteration of the incident flux upon the scattering regions it is shown that the time variable polarization in this object can be reproduced.     

Mineralogical and geochemical characterization of precipitates on stream receiving acid mine water, Korea

Seasonal variations of water chemistry occurred in acid mine drainage receiving mine and leachate water. Sulfate and metal concentrations were low in winter but high in spring and summer. Mine waters were highly acidic (up to pH 3.4) in nature with high concentrations of manganese, copper and zinc but high electrical conductivity and sulfate in leachate. The blue and brownish yellow precipitates were formed under different chemical environments of acid mine drainage. Brownish yellow (Munsell color 7.5YR 8/12), blue (Munsell color 2.5B 9/7) and light blue (Munsell color 2.5B 9/3) precipitates deposited on the stream bottom receiving acid mine water. The brownish yellow precipitates formed in the acid mine water, whereas the blue and light blue precipitates formed in the leachate water. The brownish yellow precipitates consisted mainly of ferrihydrite, whereas the blue and light blue precipitates consisted of glaucocerinite and/or woodwardite.     

Discharge prediction using hydraulic characteristics of mean velocity equation

Discharge is an important factor in river design for water utilization, water control and hydraulic structures; therefore, an accurate estimation of the discharge is required. At present, a rating curve depicting the relationship between a stage and discharge is used to calculate the discharge from river systems. Although the rating curve has an advantage in that it can predict and use the discharge during the flood season in which the measurement is difficult, there is room for improvement as it does not reflect the hydraulic characteristics of rivers. Therefore, in this study, discharge was predicted using the convenient calculation method with empirical mediating variables of the Manning and Chezy equations which were proposed by the author’s previous research as a new methodology for estimating discharge in an open channel. This was proven, based on the data measured in a meandering open channel system in a lab at the Mississippi River in the US and at the Columbia Del Dique Canal, and an accuracy level at a coefficient of 0.8 was demonstrated. Thus, this method, which reflects the hydraulic characteristics and predicts the discharge in a simple manner, is expected to be convenient in practice.     

Sequential extraction and leaching characteristics of heavy metals in abandoned tungsten mine tailings sediments

The chemical speciation of potentially toxic elements (As, Cd, Cu, Pb, and Zn) in the contaminated soils and sulfides-rich tailings sediments of an abandoned tungsten mine in Korea was evaluated by conducting modified BCR sequential extraction tests. Kinetic and static batch leaching tests were also conducted to evaluate the potential release of As and other heavy metals by acidic rain water and the leaching behaviors of these heavy metals. The major sources of the elements were As-, Zn- and Pb-bearing sulfides, Pb carbonates (i.e., cerussite), and Pb sulfates (i.e., anglesite). The biggest pollutant fraction in these soil and tailing samples consists of metals bound to the oxidizable host phase, which can be released into the environment if conditions become oxidative, and/or to residual fractions. No significant difference in total element concentrations was observed between the tailings sediments and contaminated soils. For both sample types, almost no changes occurred in the mobility of As and the other heavy metals at 7 days, but the mobility increased afterwards until the end of the tests at 30 days, regardless of the initial pH. However, the mobility was approximately 5–10 times higher at initial pH 1.0 than at initial pHs of 3.0 and 5.0. The leached amounts of all the heavy metal contents were higher from tailings sediments than from contaminated soils at pH > 3.0, but were lower at pH < 3.0 except for As. Results of this study suggest that further dissolution of heavy metals from soil and tailing samples may occur during extended rainfall, resulting in a serious threat to surface and groundwater in the mine area.     

Cu(II) adsorption at the calcite-water interface in the presence of natural organic matter: Kinetic studies and molecular-scale characterization

We have characterized the adsorption of Suwannee River humic acid (SRHA) and Cu(II) on calcite from preequilibrated solutions at pH 8.25. Sorption isotherms of SRHA on calcite follow Langmuir-type behavior at SRHA concentrations less than 15 mg C L⁻¹, whereas non-Langmuirian uptake becomes evident at concentrations greater than 15 mg C L⁻¹. The adsorption of SRHA on calcite is rapid and mostly irreversible, with corresponding changes in electrostatic properties. At pH 8.25, Cu(II) uptake by calcite in the presence of dissolved SRHA decreases with increasing dissolved SRHA concentration, suggesting that formation of Cu-SRHA aqueous complexes is the primary factor controlling Cu(II) sorption at the calcite surface under the conditions of our experiments. We also observed that surface-bound SRHA has little influence on Cu(II) uptake by calcite, suggesting that Cu(II) coordinates to calcite surface sites rather than to surface-bound SRHA.Cu K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine-structure (EXAFS) spectroscopic results show that the local coordination of Cu adsorbed at the calcite surface is very similar in the presence and absence of SRHA. Ca backscatterers at ∼3.90 Å indicate that Cu(II) forms tetragonally distorted inner-sphere adsorption complexes in both binary and ternary systems. Subtle differences in the XANES and EXAFS between binary sorption samples and ternary sorption samples, however, prevent us from ruling out the formation of ternary Cu-SRHA surface complexes. Our findings demonstrate that SRHA plays an important role in controlling the fate and transport of Cu(II) in calcite-bearing systems.     

A Closure Study of Aerosol Hygroscopic Growth Factor during the 2006 Pearl River Delta Campaign

Measurements of aerosol physical, chemical and optical parameters were carried out in Guangzhou, China from 1 July to 31 July 2006 during the Pearl River Delta Campaign. The dry aerosol scattering coefficient was measured using an integrating nephelometer and the aerosol scattering coefficient for wet conditions was determined by subtracting the sum of the aerosol absorption coefficient, gas scattering coefficient and gas absorption coefficient from the atmospheric extinction coefficient. Following this, the aerosol hygroscopic growth factor, f(RH), was calculated as the ratio of wet and dry aerosol scattering coefficients. Measurements of size-resolved chemical composition, relative humidity (RH), and published functional relationships between particle chemical composition and water uptake were likewise used to find the aerosol scattering coefficients in wet and dry conditions using Mie theory for internally- or externally-mixed particle species [(NH₄)₂SO₄, NH₄NO₃, NaCl, POM, EC and residue]. Closure was obtained by comparing the measured f(RH) values from the nephelometer and other in situ optical instruments with those computed from chemical composition and thermodynamics. Results show that the model can represent the observed f(RH) and is appropriate for use as a component in other higher-order models.     

Source identification of PM2.5 particles measured in Gwangju, Korea

The UNMIX and Chemical Mass Balance (CMB) receptor models were used to investigate sources of PM_2.5 aerosols measured between March 2001 and February 2002 in Gwangju, Korea. Measurements of PM_2.5 particles were used for the analysis of carbonaceous species (organic (OC) and elemental carbon (EC)) using the thermal manganese dioxide oxidation (TMO) method, the investigation of seven ionic species using ion chromatography (IC), and the analysis of twenty-four metal species using Inductively Coupled Plasma (ICP)-Atomic Emission Spectrometry (AES)/ICP-Mass Spectrometry (MS). According to annual average PM_2.5 source apportionment results obtained from CMB calculations, diesel vehicle exhaust was the major contributor, accounting for 33.4% of the measured PM_2.5 mass (21.5 μg m^− 3), followed by secondary sulfate (14.6%), meat cooking (11.7%), secondary organic carbon (8.9%), secondary nitrate (7.6%), urban dust (5.5%), Asian dust (4.4%), biomass burning (2.8%), sea salt (2.7%), residual oil combustion (2.6%), gasoline vehicle exhaust (1.9%), automobile lead (0.5%), and components of unknown sources (3.4%). Seven PM_2.5 sources including diesel vehicles (29.6%), secondary sulfate (17.4%), biomass burning (14.7%), secondary nitrate (12.6%), gasoline vehicles (12.4%), secondary organic carbon (5.8%) and Asian dust (1.9%) were identified from the UNMIX analysis. The annual average source apportionment results from the two models are compared and the reasons for differences are qualitatively discussed for better understanding of PM_2.5 sources.Additionally, the impact of air mass pathways on the PM_2.5 mass was evaluated using air mass trajectories calculated with the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) backward trajectory model. Source contributions to PM_2.5 collected during the four air mass patterns and two event periods were calculated with the CMB model and analyzed. Results of source apportionment revealed that the contribution of diesel traffic exhaust (47.0%) in stagnant conditions (S) was much higher than the average contribution of diesel vehicle exhaust (33.4%) during the sampling period. During Asian dust (AD) periods when the air mass passed over the Korean peninsula, Asian dust and secondary organic carbon accounted for 25.2 and 23.0% of the PM_2.5 mass, respectively, whereas Asian dust contributed only 10.8% to the PM_2.5 mass during the AD event when the air mass passed over the Yellow Sea. The contribution of biomass burning to the PM_2.5 mass during the biomass burning (BB) event equaled 63.8%.     

Observations of boundary-layer convection cells measured by dual-Doppler radar and echosonde,and by microbarograph array

Three-dimensional air motion, observed with radar in a convective planetary boundary layer under light wind conditions, is organized in cellular structures scaled from 2 to 5 km; simultaneous acoustic echosonde measurements indicate that near the ground there are smaller cells than those observable by the radar. At heights of 400 m, cell scales become as large as those observable by the radar. Pressure fluctuations at the ground measured with spatial pressure transducers, at the same time as the radar and echosonde observations, traveled at the same speed and direction as the radar volume-averaged wind. The length scale determined at the ground with pressure fluctuation data was between 1.2 and 2.4 km, smaller than the largest radar-measured motion scales.     

The internal structures and the relative rotation rates of Uranus and Neptune

The difference between the interior structures of Uranus and Neptune is presented, based on models which fit the observed mass, radius, and gravitational moments for the assumed rotation periods of these planets. If Uranus and Neptune are assumed to be as similar in internal structure as they are in mass and radius, the rotation period for Neptune must be shorter than that for Uranus. It is suggested that the true rotation period is given by Neptune's oblateness, while the photometric period corresponds to the motion of Rossby waves in the upper atmosphere.     

Simulations of magnetic-flux transport in solar active regions

We simulate the evolution of several observed solar active regions by solving a transport equation for magnetic flux at the photosphere. The rates of rotation, meridional flow, and diffusion of the flux are determined self-consistently in the calculations. Our findings are in good quantitative agreement with previous measures of the rotation rate and diffusion constant associated with photospheric magnetic fields. Although our meridional velocities are consistent in direction and magnitude with recently reported poleward flows, relatively large uncertainties in our velocity determinations make this result inconclusive.Laboratory for Computational Physics.E. O. Hulburt Center for Space Research.