西太平洋暖池区气象学特征分析

本文根据ＴＯＧＡ－ＣＯＡＲＥ强化观测资料及卫星资料分析讨论了西太平洋暖池区１１－２月间海面气象要素的平均特征。分析发现海面气压平均日变化似乎同中纬度区明显不同。文中还分析讨论了在西太暖池区西风爆发、赤道浅涡、信风逆温及ＩＴＣＥ和南太平洋辐合带ＳＰＣＺ的变化特征。     

Primary productivity in the western tropical Pacific and equatorial warm waters

ＩＮＴＲＯＤＵＣＴＩＯＮＢｙｓｔｕｄｙｉｎｇｃｈｌｏｒｏｐｈｙｌｌａｎｄｐｒｉｍａｒｙｐｒｏｄｕｃｔｉｖｉｔｙｉｎｏｃｅａｎ ,ｅｉｔｈｅｒｉｎｔｈｅｂｉｇ ｓｃａｌｅｏｒｉｎｔｈｅｓｍａｌｌｓｃａｌｅ ,ｔｈｅｐｒｏｄｕｃｔｉｖｉｔｙｄｉｓｔｒｉｂｕｔｉｏｎａｎｄｖａｒｉａｔｉｏｎｏｆｍａｒｉｎｅｏｒｇａｎｉｃｍａｔｅｒｉａｌｉｎｔｈｅｔｅｍｐｏ ｒａｌａｎｄｓｐａｔｉａｌｃａｎｂｅｕｎｄｅｒｓｔｏｏｄ .Ｔｈｅｓｅａａｒｅａｓ ,ｓｉｔｕａｔｉｎｇｉｎｔｈｅｗｅｓｔｅｒｎｔｒｏｐｉｃａｌＰａｃｉｆｉｃ…     

Co60γ射线对海带幼孢子体的影响

近几年来,有关X射线对海带配子体和幼孢子体的影响以及Co60γ射线对海带配子体的影响都有过报导。本实验在于观察Co60γ射线对海带幼孢子体的影响和目前条件下可能看到的作用机制。正如Gray(1959)所指出：尽管X射线对活细胞的作用问题已有60多年的研究,但对有关的机制还是所知极少。本实验所能探讨的只是一些可见的、也就是属于细胞水平的机制。     

Occurrence of Organic Matter in Calcimicrobialites across Permian-Triassic Boundary in Huayingshan Region, Sichuan, South China

Calcimicrobialites across the Permian-Triassic boundary in Huayingshan (华蓥山) region were investigated using the fluorescence microscopic measurements to understand the occurrence of organic matter. The microbialites are composed of micrite matrix and coarse spar cement. Abundant rhombic or magnetic needle-like carbonate minerals were observed adrift within the cement. The fluorescence microscopic measurement indicates the micrite matrix in microbialites shows the most abundant organic matter, with the rhombic or magnetic needle-like carbonate minerals and coarse spar cement coming to the 2nd and the 3rd, respectively. Organic matter is mainly preserved in the space between the grains of the micrite minerals but almost evenly distributed in the rhombic or magnetic needle-like carbonate minerals. As one of the common diagenesis types, dolomitization is observed to occur in the microbialites in Huayingshan. However, the carbonate cement in microbialites still has high content of element Sr as shown by the microprobe analysis, reflecting that the dolomitization might have happened in a restricted environment. Observation under the fluorescence microscope shows that dolomitization just led to the redistribution of organic matter in the grain space of dolomite minerals, inferring that the diagenesis has a slight effect on the preservation, and thus on the content of organic matter in the microbialites.     

Mechanism of Secondary Pore Formation and Prediction of Favorable Reservoir of Paleogene in Jiyang Sag,Eastern China

Jiyang (济阳) sag is an oil rich basin,consisting of Huimin (惠民),Dongying (东营),Zhanhua (沾化),and Chezhen (车镇) depressions.The elastic rock of Paleogene has undergone early and middle diagenetic stages and now the main clastic reservoir is in the middle diagenetic stage.Primary and secondary pores are developed in Paleogene sandstone,the latter is generated from the dissolution of feldspar and calcite cement in rocks owing to the organic acid from the maturated source rock,but the materials dissolved are different in different depressions.The reservoir secondary pores of Dongying depression are generated from the dissolution of calcite cement,the ones of Zhanhua and Huimin depressions from the dissolution of feldspar,the secondary pores of Chezhen depression from the dissolution of feldspar in upper section,and the dissolution of calcite cement in the lower section of Paleogene,respectively.The secondary pores are developed in two depths and the depth goes down from west to east,from south to north in Jiyang sag.The major controlling factors for secondary pore development are maturity and location of source rock.Lastly,the favorable reservoirs are evaluated according to reservoir buried depth,sedimentation,and diagenesis.The reservoir with high quality is located in the northern and central parts in Dongying depression; there are some good reservoirs in Gndao (孤岛),Gudong (孤东),and Gunan (孤南) areas in Zhanhua depression,and the favorable reservoirs are located in the north steep slope and the south gentle slope of Chezhen depression and central uplift,south gentle slope of Huimin depression.     

Carbon and oxygen isotopic composition of car- bonate cements of different phases in terrigenous siliciclastic reservoirs and significance for their origin： A case study from sandstones of the Triassic Yanchang Formation, southwestern Ordos Basin, China

Early carbonate cements in the Yanchang Formation sandstones are composed mainly of calcite with relatively heavier carbon isotope （their δ^18O values range from -0.3‰- -0.1‰） and lighter oxygen isotope （their δ^18O values range from -22.1‰- -19.5‰）. Generally, they are closely related to the direct precipitation of oversaturated calcium carbonate from alkaline lake water. This kind of cementation plays an important role in enhancing the anti-compaction ability of sandstones, preserving intragranular volume and providing the mass basis for later disso- lution caused by acidic fluid flow to produce secondary porosity. Ferriferous calcites are characterized by relatively light carbon isotope with δ^13C values ranging from -8.02‰ to -3.23‰, and lighter oxygen isotope with δ^18O values ranging from -22.9‰ to -19.7‰, which is obviously related to the decarboxylation of organic matter during the late period of early diagenesis to the early period of late diagenesis. As the mid-late diagenetic products, ferriferous cal- cites in the study area are considered as the characteristic authigenic minerals for indicating large-scaled hydrocarbon influx and migration within the clastic reservoir. The late ankerite is relatively heavy in carbon isotope with δ^13C values ranging from -1.92‰ to -0.84‰, and shows a wide range of variations in oxygen isotopic composition, with δ^18O values ranging from -20.5‰ to -12.6‰. They are believed to have nothing to do with decarboxylation, but the previously formed marine carbonate rock fragments may serve as the chief carbon source for their precipitation, and the alkaline diagenetic environment at the mid-late stage would promote this process.     

Effect of Bacillus mucilaginosus on weathering of phosphorite and a preliminary analysis of bacterial proteins

The authors investigated the effect of Bacillus mucilaginosus on weathering of phosphorite. Analysis of different proteins was of significance in exploring the molecular biological mechanism in the bacterial weathering process. The concrete methods are described as follows： Mineral powder was put into liquid culture medium and B. mucilaginosus was incubated in the medium. The control （group） had no mineral powder in the medium. The treatments and controls were cultured simultaneously under the same condition. In a few days, the supernatant was filtrated, the main cations （Ca^2＋, Mg^2＋, Na^＋, Mn^2＋, Al^3＋, Fe^3＋, K^＋） were measured by ICP-OES, and the contents of water soluble phosphorus （Pws） and silicon （Siws） were determined by colorimetry. The residual solid was weighed on the filter paper, followed by digestion with concentrated HNO3. The concentrations of the main cations and Pws, Siws in the digest liquid were measured by using the method mentioned above. After the supernatant was centrifuged, the precipitation was used to analyze the protein differences between the treatment groups and the control groups by 2-dimentional gel electrophoresis （2-DE）. The experimental results showed that apatite and quartz were partially weathered, but kaolinite was dissolved completely. The population of bacteria increased when mineral powder was added in the liquid medium. Software analysis and comparison of the 2-DE pictures of bacterial proteins revealed 1134 visible protein spots in the treatment group, and 729 visible protein spots in the control group. To compare the bacterial protein expression contents of the treatment group with those of the control group, there were 496 different protein spots, including 214 protein spots which indicated that the protein contents increased, 75 protein spots were indicative of a decrease, and 207 proteins were newly synthesized. It is proposed that the increased bacterial contents may be related to some protein expression and activation after the     

Study on the connectivity of heavy oil reservoirs by ultraviolet spectrum technique in the western part of the QHD32-6 oilfield

As a new method, the ultraviolet spectrum technique is applied to studying the connectivity of biode-gradable heavy oil reservoirs. The similarity of crude oils can be judged according to the extinction coefficient （E） because aromatic hydrocarbons and non-hydrocarbons have conjugated bonds and obvious absorption in the ultraviolet range, and different materials have different characteristics and additives. The relationship diagram is made in terms of the extinction coefficients （E） of the samples by taking E as the Y-axis and wavelength as the X-axis. The connectivity of oil reservoirs is estimated according to the curve positions and characteristic fingerprints of the sampies. The connectivity of part of the reservoirs in the western part of the QHD32-6 oilfield was studied with this method. The results showed that the connectivity of samples from wells F7 and F8 in the Nm-2 oil reservoir zone is good, that of samples from wells F17 and F20 in the Nm-1 oil reservoir zone also is good, and that of samples from wells F17, F19, and F20 is poor.     

The distribution and geological significance of carbazole compounds in Silurian paleo-pools of the Tarim Basin,Northwest China

The results presented in this paper indicated that the carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has high concentrations and a complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in the study of hydrocarbon migration of the paleo-pools. The difference in the contents of nitrogen compounds in the Silurian dry asphalts from the Awati, Tabei and Tazhong areas is attributed to the difference in the extent of oxidation and （or） bio-degradation for the areas; the Awati and Tabei areas underwent relatively strong oxidation and bio-degradation. During the first stage of hydrocarbon pool formation in the Silurian system in the Tazhong and Tabei areas of the Tarim Basin （at the end of the Silurian period） and at the second stage in the Awati area （in Permian）, the hydrocarbons experienced a long-distance migration.     

Regional yield estimation for winter wheat with MODIS-NDVI data in Shandong, China

The significance of crop yield estimation is well known in agricultural management and policy development at regional and national levels. The primary objective of this study was to test the suitability of the method, depending on predicted crop production, to estimate crop yield with a MODIS-NDVI-based model on a regional scale. In this paper, MODIS-NDVI data, with a 250 m resolution, was used to estimate the winter wheat (Triticum aestivum L.) yield in one of the main winter-wheat-growing regions. Our study region is located in Jining, Shandong Province. In order to improve the quality of remote sensing data and the accuracy of yield prediction, especially to eliminate the cloud-contaminated data and abnormal data in the MODIS-NDVI series, the Savitzky–Golay filter was applied to smooth the 10-day NDVI data. The spatial accumulation of NDVI at the county level was used to test its relationship with winter wheat production in the study area. A linear regressive relationship between the spatial accumulation of NDVI and the production of winter wheat was established using a stepwise regression method. The average yield was derived from predicted production divided by the growing acreage of winter wheat on a county level. Finally, the results were validated by the ground survey data, and the errors were compared with the errors of agro-climate models. The results showed that the relative errors of the predicted yield using MODIS-NDVI are between −4.62% and 5.40% and that whole RMSE was 214.16 kg ha⁻¹ lower than the RMSE (233.35 kg ha⁻¹) of agro-climate models in this study region. A good predicted yield data of winter wheat could be got about 40 days ahead of harvest time, i.e. at the booting-heading stage of winter wheat. The method suggested in this paper was good for predicting regional winter wheat production and yield estimation.