东北地区大气污染物源排放时空特征：基于国内外清单的对比分析

基于国内外4类常用的污染源排放清单数据（EDGAR：全球大气研究排放数据库;CEDS：社区排放数据系统;MIX：亚洲排放清单;PKU-FUEL：全球燃料排放数据）,对东北区域5类人为排放源（工业源、能源、交通运输源、生活民用源和农业源）的8种污染物（PM_2.5、PM₁₀、SO₂、NO_x、NMVOCs、NH₃、OC和BC）从排放总量、来源贡献和时空分布特征等方面进行对比分析。结果表明：东北污染物排放主要以SO₂、NO_x和NMVOCs为主,工业、能源和交通运输为主要贡献源;PM_2.5和PM₁₀主要来自生活民用源和工业源,贡献率前者大于后者。辽宁省污染物（除NH₃外）排放最大,其次为黑龙江省、吉林省和内蒙古东四盟市,冬季排放强度明显高于其他季节。NH₃主要来自农业源,排放峰值发生在5~7月;各清单间排放总量和来源贡献差异明显,EDGAR和PKU清单对NH₃估算差异度为170.3%;SO₂、NO_x、BC和OC的排放差异度均在30%以上。不同活动水平和排放因子的使用是造成清单差异的主要原因。本研究可以掌握东北污染状况,了解清单差异,为本地化清单工作开展提供研究方向,同时也可为模式模拟合理选择清单数据提供参考。     

长江经济带开发区空间分布与产业集聚特征研究

采用最近邻指数、Ripley’s L 函数、核密度估计等方法分析长江经济带开发区的空间分布与产业集聚特征,结果表明:① 长江经济带开发区总体上呈东密西疏、东强西弱、东中西段分异的显著集聚分布特征;② 基于主导产业划分的各类开发区在空间上均为集聚分布,集聚强度和规模随距离的增加基本都呈“先增加后减小”的规律,集聚形态各异,主要有“单核心”“双核心”“多核心”3种;③ 长江经济带东段地区主要以装备制造、通信电子、汽车制造、新材料、生物医药等资本技术密集型产业集聚为主,中、西段地区则集聚了化学工业、金属加工、食品制造、纺织服装等资本与劳动密集型产业。要加强经济带上中下游开发区之间的多维良性互动,注重绿色发展、创新发展与结构优化,进一步提升其对长江经济带高质量发展的引领与支撑作用。     

城市内涝灾害受灾人口评估方法与实证研究：以哈尔滨市道里区为例

城市内涝灾害频发,对居民生命安全造成严重威胁,为提高城市内涝灾害受灾人口评估精度,提出一种更为精确的受灾人口评估方法。以哈尔滨市道里区为研究区,以城市内涝灾害受灾人口为研究对象,运用一、二维非恒定流为主控方程,构建城市内涝数值模拟模型,并结合受灾人口分布特点,综合构建基于土地利用的人口随时间变化的计算模型。实现在模拟内涝灾害影响范围基础上,利用受灾人口计算模型提取白天与夜晚受灾人口分布情况。结果表明：研究区在百年一遇降雨情景下,有25条街道会发生不同程度积水,积水深度范围值为0.10~1.42 m;此级别内涝灾害在白天11条街道受灾人口数量最大值达到3 500人,夜晚10条街道受灾人口数量最大值为720人。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.     

一种无人艇自适应无线通信系统的设计应用

随着无人艇技术的发展成熟,各型无人艇已逐步应用到民用和军用领域。无线通信系统作为无人艇的重要组成部分,承担着无人艇与母艇之间信息交互的功能。从无线通信技术的发展现状出发,分析出适用于无人艇应用场景的无线通信技术及工程设计方法,并设计了一种自适应无线通信系统。该系统能根据无人艇工作状态提供连续稳定的数据链,经试验测试,运行效果良好。     

The sulfurization recorded in tridymite in the monomict eucrite Northwest Africa 11591

Some of the tridymite in the monomict Northwest Africa (NWA) 11591 eucrite are found to have sulfide‐rich replacement textures (SRTs) to varying degrees. The SRTs of tridymite in NWA 11591 are characterized by the distribution of loose porous regions with aggregates of quartz and minor troilite grains along the rims and fractures of the tridymite, and we propose a new mechanism for the origin of this texture. According to the volume and density conversion relationship, the quartz in the SRT of tridymite with a hackle fracture pattern was transformed from tridymite. We suggest that the primary tridymite grains are affected by the S‐rich vapors along the rims and fractures, leading to the transformation of tridymite into quartz. In addition, the S‐rich vapors reacted with Fe²⁺, which was transported from the relict tridymite and/or the adjacent Fe‐rich minerals, and/or the S‐rich vapors react with the exotic metallic Fe to form troilite grains. The sulfurization in NWA 11591 most likely occurred during the prolonged subsolidus thermal metamorphism in the shallow crust of Vesta and might be an open, relatively high temperature (>800 °C) process. Sulfur would be an important component of the metasomatic fluid on Vesta.     

Clinoform growth and sediment flux into late Cenozoic Qiongdongnan shelf margin,South China Sea

The South China Sea continental margin in the Qiongdongnan Basin (QDNB) area has incrementally prograded since 10.5 Ma generating a margin sediment prism more than 4km-thick and 150–200 km wide above the well-dated T40 stratigraphic surface. Core and well log data, as well as clinoform morphology and growth patterns along 28 2D seismic reflection lines, illustrate the evolving architecture and margin morphology; through five main seismic-stratigraphic surfaces (T40, T30, T27, T20 and T0) frame 15 clinothems in the southwest that reduce over some 200 km to 8 clinoforms in the northeast. The overall margin geometry shows a remarkable change from sigmoidal, strongly progradational and aggradational in the west to weakly progradational in the east. Vertical sediment accumulation rate increased significantly across the entire margin after 2.4 Ma, with a marked increase in mud content in the succession. Furthermore, an estimate of sediment flux across successive clinoforms on each of the three selected seismic cross sections indicate an overall decrease in sediment discharge west to east, away from the Red River depocenter, as well as a decrease in the percentage of total discharge crossing the shelf break in this same direction. The QDNB Late Cenozoic continental margin growth, with its overall increased sediment flux, responded to the climate-induced, gradual cooling and falling global sea level during this icehouse period.     

青藏高原农区农户的家庭能源消费研究

农村能源转型是能源消费革命的重要组成部分。基于问卷调查和入户访谈,对青海省10个县（区）的318户农区家庭用能信息进行调查,辨识了青海省农区不同收入分层家庭的能源消费模式,并通过建立典型家庭能源流模型,总结了家庭能获取-消费-废弃过程的形态变化。结果显示：青海省农区家庭能源消费以煤炭、薪柴和秸秆为主,非商品能源消费占比为49.6%,清洁能源使用率低。煤炭消费在5类家庭中均占比最高,薪柴和秸秆消费在低收入家庭占比较高。高收入家庭能源消费类型更多,消费量也大,能源流动更复杂。最后,根据青海省的经济地理特征,提出相应政策建议。