Regional Fluxes Of Momentum And Sensible Heat Over A Sub-Arctic Landscape During Late Winter

Based on measurements at Sodankylä Meteorological Observatory the regional (aggregated) momentum and sensible heat fluxes are estimated for two days over a site in Finnish Lapland during late winter. The forest covers 49% of the area. The study shows that the forest dominates and controls the regional fluxes of momentum and sensible heat in different ways. The regional momentum flux is found to be 10–20% smaller than the measured momentum flux over the forest, and the regional sensible heat flux is estimated to be 30–50% of the values measured over a coniferous forest.The regional momentum flux is determined in two ways, both based on blending height theory. One is a parameterised method, the other represents a numerical solution of an aggregation model. The regional sensible heat flux is determined from the theory of mixed-layer growth. At near neutral conditions the regional momentum flux can be determined independently of the regional sensible heat flux. At unstable conditions the two models become coupled.The information that is needed by the parameterised blending height method and by the mixed-layer evolution method in order to derive the regional fluxes of momentum and sensible heat can be obtained from radiosonde profiles of wind speed and temperature.     

Current and future atmospheric circulation at 500 hPa over Greenland simulated by the CMIP3 and CMIP5 global models

The Greenland ice sheet is projected to be strongly affected by global warming. These projections are either issued from downscaling methods (such as Regional Climate Models) or they come directly from General Circulation Models (GCMs). In this context, it is necessary to evaluate the accuracy of the daily atmospheric circulation simulated by the GCMs, since it is used as forcing for downscaling methods. Thus, we use an automatic circulation type classification based on two indices (Euclidean distance and Spearman rank correlation using the daily 500 hPa geopotential height) to evaluate the ability of the GCMs from both CMIP3 and CMIP5 databases to simulate the main circulation types over Greenland during summer. For each circulation type, the GCMs are compared to three reanalysis datasets on the basis of their frequency and persistence differences. For the current climate (1961–1990), we show that most of the GCMs do not reproduce the expected frequency and the persistence of the circulation types and that they simulate poorly the observed daily variability of the general circulation. Only a few GCMs can be used as reliable forcings for downscaling methods over Greenland. Finally, when applying the same approach to the future projections of the GCMs, no significant change in the atmospheric circulation over Greenland is detected, besides a generalised increase of the geopotential height due to a uniform warming of the atmosphere.     

Magnetic resonance sounding applied to aquifer characterization

Magnetic resonance sounding (MRS) is distinguished from other geophysical tools used for ground water investigation by the fact that it measures a magnetic resonance signal generated directly from subsurface water molecules. An alternating current pulse energizes a wire loop on the ground surface and the MRS signal is generated; subsurface water is indicated, with a high degree of reliability, by nonzero amplitude readings. Measurements with varied pulse magnitudes then reveal the depth and thickness of water saturated layers. The hydraulic conductivity of aquifers can also be estimated using boreholes for calibration. MRS can be used for both predicting the yield of water supply wells and for interpolation between boreholes, thereby reducing the number of holes required for hydrogeological modeling. An example of the practical application of MRS combined with two-dimensional electrical imaging, in the Kerbernez and Kerien catchments area of France, demonstrates the efficiency of the technique.     

Chalcophile element geochemistry of the Boggy Plain zoned pluton, southeastern Australia: a S-saturated barren compositionally diverse magmatic system

The behavior of the platinum group elements (PGE) and Re in felsic magmas is poorly understood due to scarcity of data. We report the concentrations of Ni, Cu, Re, and PGE in the compositionally diverse Boggy Plain zoned pluton (BPZP), which shows a variation of rock type from gabbro through granodiorite and granite to aplite with a SiO₂ range from 52 to 74 wt %. In addition, major silicate and oxide minerals were analyzed for Ni, Cu, and Re, and a systematic sulfide study was carried out to investigate the role of silicate, oxide, and sulfide minerals on chalcophile element geochemistry of the BPZP. Mass balance calculation shows that the whole rock Cu budget hosted by silicate and oxide minerals is <13 wt % and that Cu is dominantly located in sulfide phases, whereas most of the whole rock Ni budget (>70 wt %) is held in major silicate and oxide minerals. Rhenium is dominantly hosted by magnetite and ilmenite. Ovoid-shaped sulfide blebs occur at the boundary between pyroxene phenocrysts and neighboring interstitial phases or within interstitial minerals in the gabbro and the granodiorite. The blebs are composed of pyrrhotite, pyrite, chalcopyrite, and S-bearing Fe-oxide, which contain total trace metals (Co, Ni, Cu, Ag, Pb) up to ~16 wt %. The mineral assemblage, occurrence, shape, and composition of the sulfide blebs are a typical of magmatic sulfide. PGE concentrations in the BPZP vary by more than two orders of magnitude from gabbro (2.7–7.8 ppb Pd, 0.025–0.116 ppb Ir) to aplite (0.05 ppb Pd, 0.001 ppb Ir). Nickel, Cu, Re, and PGE concentrations are positively correlated with MgO in all the rock types although there is a clear discontinuity between the granodiorite and the granite in the trends for Ni, Rh, and Ir when plotted against MgO. Cu/Pd values gradually increase from 6,100 to 52,600 as the MgO content decreases. The sulfide petrology and chalcophile element geochemistry of the BPZP show that sulfide saturation occurred in the late gabbroic stage of magma differentiation. Segregation and distribution of these sulfide blebs controlled Cu and PGE variations within the BPZP rocks although the magma of each rock type may have experienced a different magma evolution history in terms of crustal assimilation and crystal fractionation. The sulfide melt locked in the cumulate rocks must have sequestered a significant portion of the chalcophile elements, which restricted the availability of these metals to magmatic-hydrothermal ore fluids. Therefore, we suggest that the roof rocks that overlay the BPZP were not prospective for magmatic-hydrothermal Cu, Au, or Cu–Au deposits.     

An integrated zircon geochronological and geochemical investigation into the Miocene plutonic evolution of the Cyclades, Aegean Sea, Greece: Part 1: Geochronology

We use 369 individual U–Pb zircon ages from 14 granitoid samples collected on five islands in the Cyclades in the Aegean Sea, Greece, for constraining the crystallisation history of I- and S-type plutons above the retreating Hellenic subduction zone. Miocene magmatism in the Cyclades extended over a time span from 17 to 11 Ma. The ages for S-type granites are systematically ~2 million years older than those for I-type granites. Considering plutons individually, the zircon data define age spectra ranging from simple and unimodal to complex and multimodal. Seven of the 14 investigated samples yield more than one distinct zircon crystallisation age, with one I-type granodiorite sample from Mykonos Island representing the most complex case with three resolvable age peaks. Two samples from S-type granites on Ikaria appear to have crystallised zircon over 2–3 million years, whereas for the majority of individual samples with multiple zircon age populations the calculated ages deviate by 1–1.5 million years. We interpret our age data to reflect a protracted history involving initial partial melting at deeper lithospheric levels, followed by crystallisation and cooling at shallower crustal levels. Our study corroborates published research arguing that pluton construction is due to incremental emplacement of multiple magma pulses over a few million years. Assuming that multiple age peaks of our 14 samples can indeed serve to quantify time spans for magmatic emplacement, our data suggest that Aegean plutons were constructed over a few million years. Our tectonic interpretation of the U–Pb ages is that the S-type granites resulted from partial melting and migmatisation of the lower crust, possibly starting at ~23 Ma. The I-type granites and associated mafic melts are interpreted to reflect the magmatic arc stage in the Cyclades starting at ~15 Ma.     

Comparing mixing-length models of the diabatic wind profile over homogeneous terrain

Models of the diabatic wind profile over homogeneous terrain for the entire atmospheric boundary layer are developed using mixing-length theory and are compared to wind speed observations up to 300 m at the National Test Station for Wind Turbines at Høvsøre, Denmark. The measurements are performed within a wide range of atmospheric stability conditions, which allows a comparison of the models with the average wind profile computed in seven stability classes, showing a better agreement than compared to the traditional surface-layer wind profile. The wind profile is measured by combining cup anemometer and lidar observations, showing good agreement at the overlapping heights. The height of the boundary layer, a parameter required for the wind profile models, is estimated under neutral and stable conditions using surface-layer turbulence measurements, and under unstable conditions based on the aerosol backscatter profile from ceilometer observations.     

Growth performance of exotic and indigenous tree species in saline soils in Turkana, Kenya

In the arid zone of central Turkana, north-western Kenya, where soil salinity affects 15–20% of the rangelands, growth performances of trees planted in saline soil rehabilitation trials have not been evaluated. Tree-planting trials have emphasised exotic species over indigenous ones. However, advantages and disadvantages of promoting exotic tree species have not been examined. The current study was aimed at evaluating growth performance of seven exotic and nine indigenous tree species used in saline soil rehabilitation trials. The tree species were established from 6-month-old saplings using microcatchments (FT1) from 1988 through 1990 and pitting treatment (FT2) from 1989 through 1992. The soils in FT1 and FT2 treatments were moderately to highly saline. The exotic tree species produced greater cover and volume during the first year (FT1) but by the second year, production was not sustained due to greater mortality (FT1 & FT2). The indigenous species in general had higher survival rates. Relative growth rates (RGR) of exotic and indigenous species did not differ (FT1 & FT2). Tree mortality was negatively correlated with RGR for exotic species in FT1 but not for indigenous ones. However, changes in plant performance were not in response to salinity alone. Rather, water scarcity superimposed on soil salinity might have influenced plant growth performance. Greater water and salinity stress and subsequently greater mortality in exotic species provided a more convincing reason for promotion of indigenous tree species. In the future, knowledge of salinity distribution and selection of indigenous species to match this will be a better way of rehabilitating sites affected by soil salinity in the arid zone of central Turkana, north-western Kenya.     

Update of a Footprint-Based Approach for the Characterisation of Complex Measurement Sites

Horizontal heterogeneity can significantly affect the flux data quality at monitoring sites in complex terrain. In heterogeneous conditions, the adoption of the eddy-covariance technique is contraindicated by the lack of horizontal homogeneity and presence of advective conditions. In addition, uncertainty concerning the sources or sinks influencing a measurement compromises the data interpretation. The consideration of the spatial context of a measurement, defined by a footprint analysis, can therefore provide an important tool for data quality assessment. This study presents an update of an existing footprint-based quality evaluation concept for flux measurement sites in complex terrain. The most significant modifications in the present version are the use of a forward Lagrangian stochastic trajectory model for the determination of the spatial context of the measurements, and the determination of effective roughness lengths with a flux aggregation model in a pre-processing step. Detailed terrain data gathered by remote sensing methods are included. This approach determines spatial structures in the quality of flux data for varying meteorological conditions. The results help to identify terrain influences affecting the quality of flux data, such as dominating obstacles upwind of the site, or slopes biasing the wind field, so that the most suitable footprint regions for the collection of high-quality datasets can be identified. Additionally, the approach can be used to evaluate the performance of a coordinate rotation procedure, and to check to what extent the measured fluxes are representative for a target land-use type.     

Evolution of a post-batholith dike swarm in central coastal Queensland, Australia: arc-front to backarc?

A swarm of felsic and mafic dikes cuts a Late Carboniferous–Permian batholith called the Urannah Suite in central coastal Queensland. Late Permian–Triassic westward thrusting (Hunter–Bowen Orogeny) exposed this mid-crustal Suite and the crosscutting dikes, thus enabling examination of dikes that range in age from syn- to post-batholithic. Although both mafic and felsic dikes have the same dominant northerly strike, field, geochronologic and geochemical examination reveal that the swarm is composite; felsic dikes are older (285 Ma) and geochemically and isotopically distinct from mafic dikes (273–229 Ma). Dike compositions are compared to those of the host plutonic rocks, and to volcanic rocks the same age as the dikes. Whereas the felsic (older) dikes are compositionally similar to their host granites (initial ⁸⁷Sr/⁸⁶Sr>0.7045), the mafic (younger) dikes are isotopically (Sr, Nd, Pb) less radiogenic. Moreover, several different types of mafic dikes are evident based on geochemistry; most of these have mixed characteristics in terms of tectonic classification. All but two dikes of basalt and basaltic andesite composition classify as ‘with-in plate' on Ti–Zr–Y tectonic classification plots. Many of the basalts have high TiO₂ contents (1.5–3.0 wt.%). Most of these have REE and spider diagram patterns like calc-alkaline tholeiites, the exceptions being a few alkali basalts recognized by their alkali content, and high Ti, Ce, Nb and Zr contents. When put into the context of all plutonic rocks in the area (late Paleozoic and Mesozoic), these dikes record a transition at 280 Ma, after which time, all magmatism in the region is less isotopically evolved (initial ⁸⁷Sr/⁸⁶Sr=0.7033–0.7044). A model of slab retreat and hinge movement to the east in the latest Permian explains the change of geochemical signature from arc-front to backarc at about 280 Ma.