Microvariability in the early stages of cobble weathering by microenvironment on a glacier foreland,Storbreen, Jotunheimen,Norway

The initial stages of cobble weathering, measured as increasing percentage porosity, were calculated for sets of cobbles taken from the foreland of Storbreen, a cirque glacier in the Jotunheimen, Norway. Cobbles were taken from in front of the 1998 glacier snout, from the 1928, 1870, 1810 and 1750 moraine crests and from the ～10 000‐year‐old land surface beyond the Neoglacial foreland limit. Three microenvironments were examined within each site: (1) lichen‐free surfaces from exposed cobbles, (2) lichen‐covered surfaces from exposed cobbles and (3) buried cobbles taken from a soil depth of ～40 cm. Percentage porosity within plagioclase minerals was calculated using backscatter electron images of prepared thin sections. Porosity was calculated from five depth profiles into each cobble. Depth profiles were subdivided into a sequence of 50 µm × 50 µm rectangles running to at least a nominal depth of 500 µm within each cobble. Three cobbles from each dated land surface were sampled, except for the 1750 surface, which had five cobbles. Statistical analysis was by analysis of variance of rank‐order transformed data. Findings indicate that cobbles close to the glacier snout are largely unweathered; also, weathering is generally weak in the 1928, 1870 and 1810 positions, but statistically significantly higher in the 1750‐ and 10 000‐year‐old positions. Weathering of buried cobbles always exceeded weathering of exposed cobbles and may possibly reach a value beyond which it cannot progress while retaining surface cohesion. The degree of weathering on lichen‐free and lichen‐covered cobble surfaces is not initially distinguishable, but diverges sharply after ～250 years, when lichen‐covered surfaces experience significantly higher totals. Overall, the weathering trend in cobbles matches that found in soils at the same sites. Copyright © 2007 John Wiley & Sons, Ltd.     

BIOSCREEN-AT: BIOSCREEN with an exact analytical solution

BIOSCREEN is used extensively for screening-level evaluation of the transport of dissolved contaminants in ground water. The code has an effective graphical user interface that makes it ideal for use in both professional practice and as a teaching aid. BIOSCREEN implements the approximate transport solution of Domenico (1987). This note describes an enhanced version of the program, BIOSCREEN-AT, which supplements the Domenico solution with an exact analytical solution. The exact analytical solution has been integrated seamlessly within the BIOSCREEN interface and provides a simple and direct way to calculate an exact solution to the transport equation and, if desired, to assess the significance of the errors introduced by the Domenico (1987) solution for site-specific applications. The modified version of BIOSCREEN is designated BIOSCREEN-AT and can be downloaded free of charge from http://www.sspa.com/./software/BIOSCREEN.htm.     

Bioaugmentation and Propane Biosparging for In Situ Biodegradation of 1,4‐Dioxane

Propane biosparging and bioaugmentation were applied to promote in situ biodegradation of 1,4‐dioxane at Site 24, Vandenberg Air Force Base (VAFB), CA. Laboratory microcosm and enrichment culture testing demonstrated that although native propanotrophs appeared abundant in the shallow water‐bearing unit of the aquifer (8 to 23 ft below ground surface [bgs]), they were difficult to be enriched from a deeper water‐bearing unit (82 to 90 feet bgs). Bioaugmentation with the propanotroph Rhodococcus ruber ENV425, however, supported 1,4‐dioxane biodegradation in microcosms constructed with samples from the deep aquifer. For field testing, a propane‐biosparging system consisting of a single sparging well and four performance monitoring wells was constructed in the deep aquifer. 1,4‐dioxane biodegradation began immediately after bioaugmentation with R. ruber ENV425 (36 L; 4 × 10⁹ cells/mL), and apparent first‐order decay rates for 1,4‐dioxane ranged from 0.021 day^?1 to 0.036 day^?1. First‐order propane consumption rates increased from 0.01 to 0.05 min^?1 during treatment. 1,4‐dioxane concentrations in the sparging well and two of the performance monitoring wells were reduced from as high as 1090 µg/L to <2 µg/L, while 1,4‐dioxane concentration was reduced from 135 µg/L to 7.3 µg/L in a more distal third monitoring well. No 1,4‐dioxane degradation was observed in the intermediate aquifer control well even though propane and oxygen were present. The demonstration showed that propane biosparging and bioaugmentation can be used for in situ treatment of 1,4‐dioxane to regulatory levels.     

Proposed design models for the asymmetric friction connection

The Asymmetric Friction Connection (AFC) remains elastic during moderate earthquake shaking but slides and dissipates energy through friction during severe earthquake shaking. The sliding friction forces developed are dependent on the clamping force in the connection which is provided by fully tensioned bolts which pass through slotted holes. During sliding these bolts are subject to moment and shear as well as axial force. Moment–shear–axial force interaction reduces the clamping axial force on the sliding interfaces thereby reducing the sliding shear resistance (V_ss). Two methods to evaluate the moment–shear–axial force interaction have been proposed so that the sliding shear strength can be quantified, but as yet, these methods are not robust. This paper describes the results of 60 tests undertaken to improve the two methods, namely the moment–shear–axial force bolt model and the effective coefficient of friction method, for AFCs with high hardness steel shims. The bolts were M16 to M30 bolts and cleat thicknesses ranged from 12 mm to 25 mm. It is shown that either method may be used in design as the results obtained are similar. Copyright © 2014 John Wiley & Sons, Ltd.     

Secondary Effects of Soil Venting and Potential Low-Cost Enhancements

Soil venting, in addition to removing volatile organic compounds, has secondary effects on soil temprature and moisture content. A simple enthalpy balance model is used to illustrate the maganitude and direction of temperature and moisture content changes in the soil during ordinary venting and with several potential modifications to venting. Because of the importance of latent heat of vaporization, injection of warm, dry air into the substance is generally ineffective in heating the soil. In contrast, injection of humidified, slightly heated air is found to result in significant soil warming even at low flow rates. Soil warming is thought to be an important mechanism for enhancing remediation, particularly in the final or tail stage of cleanup where concentrations slowly decline wiht time. A variety of soil venting alternatives are simulated at hypothetical sites in Chicago, Illinois, and Tucson, Arizona, including simple humidification, humidification with solar heating, and venting under positive pressure. All there methods result in higher final soil temperatures than the control case of normal soil venting. Humidification of the input air at the rates applied does not result in significant change in average soil moisture content or saturation of the soil wtih water.     

A Field Test of Electromigration as a Method for Remediating Sulfate from Shallow Ground Water

Eloctromigraiion offers a potential tool for remediating ground water contaminated with highly soluble components, such as Na⁺, Cl, NO₃ and SO₄⁻. A field experiment was designed to lest the efficacy of electromigration for preconcontrating dissolved SO₄² in ground water associated with a fossil-fuel power plant. Two shallow wells, 25 feel apart (one 25 feel deep, the other 47 feet deep), were constructed in the upper portion of an unconfined alluvial aquifer. The wells were constructed with a double-wall design, with an outer casing of 4-inch PVC and an inner lube of 2-inch FVC; both were fully slotted (0.01 inch). Electrodes were constructed by wrapping the inner lulling with a 100-foot length of rare-earth metal oxide/copper wire. An electrical potential of 10.65 volts DC Was applied, and tests were run for periods of 12, 44, and 216 hours. Results showed large changes in the pH from the initial pH of ground water of about 7.5 to values of approximately 2 and 12 at the anode and cathode, respectively. Despite the fact that the test conditions were far from ideal, dissolved SO₄^2-; was significantly concentrated at the anode. Over a period of approximately nine days, the concentration of SO₄^2- at the anode reached what appeared to he a steady-state value of 2200 mg/L. compared lo the initial value in ground water of approximately 1150 mg/L. The results of this field lest should encourage further investigation of electromigration as a tool in the remediation of contaminated ground water.     

Hydrologic flowpaths during snowmelt in forested headwater catchments under differing winter climatic and soil frost regimes

Changes in hydrologic flowpaths have important impacts on the timing, magnitude and hydrochemistry of run‐off during snowmelt in forested catchments, but how flowpaths are affected by variation in winter climate and the irregular presence of soil frost remains poorly understood. The depth and extent of soil frost may be expected to increase as snowpack decreases or develops later because of climate change. In this study, we used end‐member mixing analysis to determine daily contributions of snow, forest floor soil water and groundwater to stream run‐off during snowmelt under different soil frost regimes resulting from interannual and elevational variation at the Hubbard Brook Experimental Forest in New Hampshire, USA. We observed greater routing of run‐off through forest floor flowpaths during early snowmelt in 2011, when the snowpack was deep and soil frost was minimal, compared with the early snowmelt in 2012 under conditions of deep and extensive soil frost. The results indicate that widespread soil frost that penetrated the depth of the forest floor decreased the flow signal through the shallowest subsurface flowpaths, but did not reduce overall infiltration of melt waters, as the contribution from the snow‐precipitation end‐member was similar under both conditions. These results are consistent with development of granular soil frost which permits vertical infiltration of melt waters, but either reduces lateral flow in the forest floor or prevents the solute exchange that would produce the typical chemical signature of shallow subsurface flowpaths in streamwater. Copyright © 2016 John Wiley & Sons, Ltd.     

Arsenic and trace metal contents in sediment profiles from the Admiralty Bay, King George Island, Antarctica

Admiralty Bay (Antarctica) hosts three scientific stations (Ferraz, Arctowski and Macchu Picchu), which require the use of fossil fuel as an energy source. Fossil fuels are also considered the main source of pollution in the area, representing important inputs of major pollutants (organic compounds) and trace metals and metalloids of environmental interest. Accordingly, this work presents the results of As, Cd, Cr, Cu, Ni, Pb and Zn in sediment profiles from Admiralty Bay. The sediment results from Ferraz station were slightly higher than the other sampling sites. The highest contents were observed for Cu and Zn (from 44 to 89 mg kg⁻¹). Otherwise, by using enrichment factors and geochronology analysis, the most relevant enrichment was observed for As in the samples collected close to the Ferraz station, indicating that increasing As content may be associated with the activities associated with this site.     

大地震与全球地震台网

引言 地震学家经常开玩笑说,＂阻止地震的最好办法就是布设地震台站。＂为了记录地震信号或开展有针对性的有关地球结构的研究就需要布设地震仪,而地震的发生往往是变幻莫测的,在时间和空间上都绝对是非均匀的,所以安装地震仪的辛苦有时会徒劳无功。     

Analysis of magnetic data over part of the Younger Granite Province of Nigeria

The results of a magnetic study of part of the Younger Granite Province of Nigeria are presented here. Spectral analysis of the magnetic anomalies over the area has been carried out in an effort to estimate the depth to magnetic sources. Average magnetic source depth of 286 m has been obtained for the area and this is thought to be related to the depth to the top of the main anomalous structures in the area. Observed magnetic anomaly profiels taken across the area have been interpreted in terms of arbitrarily shaped bodies—whose existence was confirmed by 3-D Hilbert transformation-using nonlinear optimization techniques. The modelled bodies occur at depths of 200–760 m and have magnetizations of 0.29–0.47 A/m. The results from the analysis of the magnetic field are discussed in relation to the results from previous gravity studies over the area and the mode of emplacement of the Younger Granites.