Effects of soil–plant-biochar interactions on water retention and slope stability under various rainfall patterns

Landslides - Due to climate change, extreme rainfalls happen more frequently with different patterns. Biochar and plant roots can affect soil water retention curve (SWRC) and hence slope stability....     

Ferrihydrite dissolution by pyridine-2,6-bis(monothiocarboxylic acid) and hydrolysis products

Pyridine-2,6-bis(monothiocarboxylate) (pdtc), a metabolic product of microorganisms, including Pseudomonas putida and Pseudomonas stutzeri was investigated for its ability of dissolve Fe(III)(hydr)oxides at pH 7.5. Concentration dependent dissolution of ferrihydrite under anaerobic environment showed saturation of the dissolution rate at the higher concentration of pdtc. The surface controlled ferrihydrite dissolution rate was determined to be 1.2 × 10⁻⁶ mol m⁻² h⁻¹. Anaerobic dissolution of ferrihydrite by pyridine-2,6-dicarboxylic acid or dipicolinic acid (dpa), a hydrolysis product of pdtc, was investigated to study the mechanism(s) involved in the pdtc facilitated ferrihydrite dissolution. These studies suggest that pdtc dissolved ferrihydrite using a reduction step, where dpa chelates the Fe reduced by a second hydrolysis product, H₂S. Dpa facilitated dissolution of ferrihydrite showed very small increase in the Fe dissolution when the concentration of external reductant, ascorbate, was doubled, suggesting the surface dynamics being dominated by the interactions between dpa and ferrihydrite. Greater than stoichiometric amounts of Fe were mobilized during dpa dissolution of ferrihydrite assisted by ascorbate and cysteine. This is attributed to the catalytic dissolution of Fe(III)(hydr)oxides by the in situ generated Fe(II) in the presence of a complex former, dpa.     

Rapid sampling of organic matter in flooded soils and sediments

Estuaries and Coasts - A coring system using a compressed air supply and a sediment shaking procedure using a soil dispersant are described which greatly simplify and shorten the task of...     

Geologic assessment of environmental impact in Lake Macatawa,Michigan

A historical record of the effects of human development upon Lake Macatawa is established using geologic criteria. Significant cultural events are recognized using the pollen record, particularly ambrosia/vesiculate pollen ratios, and occurrences of detrital and chemical contaminants within the more recent sedimentary column. Detrital contaminants include such things as cinder and ash from coal burning power plants and animal hair from early tanning operations. Trace metal contaminants, frequently associated with specific industrial events, are particularly useful in establishing a modern sedimentary chronology. The impact of human activity upon Lake Macatawa is measured using fossil diatoms. The advantage of this method of environmental impact assessment is that it provides a historical perspective in which changes within an environment are related to its natural conditions.     

The evolution of the mantle''s chemical structure

The geochemistry of flood basalts and their associated picrites, and of komatiites and their associated basalts, combined with a theoretical model for the structure of mantle starting plumes, can be used to decipher key elements of the geochemical structure of the deep mantle and show how it has varied through time. We argue that the thermal boundary layer above the core consisted mainly of depleted mantle similar to the present MORB source during the Archaean and this was largely replaced between 2.7 and 2.0 billion years ago by enriched mantle to form the OIB source. We suggest that this change in the nature of the hotspot source reflects a fundamental change in the dominant component of downward convection: from cold plumes breaking away from beneath a stable lithosphere during the pre-Archaean to subduction of lithosphere in the Archaean and post-Archaean mantles.     

Building zoned ignimbrites by recycling silicic cumulates: insight from the 1,000 km<Superscript>3</Superscript> Carpenter Ridge Tuff,CO

The ~1,000 km³ Carpenter Ridge Tuff (CRT), erupted at 27.55 Ma during the mid-tertiary ignimbrite flare-up in the western USA, is among the largest known strongly zoned ash-flow tuffs. It consists primarily of densely welded crystal-poor rhyolite with a pronounced, highly evolved chemical signature (high Rb/Sr, low Ba, Zr, Eu), but thickly ponded intracaldera CRT is capped by a more crystal-rich, less silicic facies. In the outflow ignimbrite, this upper zone is defined mainly by densely welded crystal-rich juvenile clasts of trachydacite composition, with higher Fe–Ti oxide temperatures, and is characterized by extremely high Ba (to 7,500 ppm), Zr, Sr, and positive Eu anomalies. Rare mafic clasts (51–53 wt% SiO₂) with Ba contents to 4,000–5,000 ppm and positive Eu anomalies are also present. Much of the major and trace-element variations in the CRT juvenile clasts can be reproduced via in situ differentiation by interstitial melt extraction from a crystal-rich, upper-crustal mush zone, with the trachydacite, crystal-rich clasts representing the remobilized crystal cumulate left behind by the melt extraction process. Late recharge events, represented by the rare mafic clasts and high-Al amphiboles in some samples, mixed in with parts of the crystal cumulate and generated additional scatter in the whole-rock data. Recharge was important in thermally remobilizing the silicic crystal cumulate by partially melting the near-solidus phases, as supported by: (1) ubiquitous wormy/sieve textures and reverse zoning patterns in feldspars and biotites, (2) absence of quartz in this very silicic unit stored at depths of >4–5 km, and (3) heterogeneous melt compositions in the trachydacite fiamme and mafic clasts, particularly in Ba, indicating local enrichment of this element due mostly to sanidine and biotite melting. The injection of hot, juvenile magma into the upper-crustal cumulate also imparted the observed thermal gradient to the deposits and the mixing overprint that partly masks the in situ differentiation process. The CRT provides a particularly clear perspective on processes of in situ crystal-liquid separation into a lower crystal-rich zone and an upper eruptible cap, which appears common in incrementally built upper-crustal magma reservoirs of high-flux magmatic provinces.     

Secondary dispersion from gold deposits in west Turkey

Orientation studies over the Sarpda? prospect in the Biga peninsula and the Arapdagi deposit near Izmir have provided elear evidence for elemental dispersion around west Turkish gold prospects. Although these deposits are of different types, silicification associated with the deposits results in the main part of both deposits forming topographic highs.At Sarpda? gold mineralisation is relatively weak compared with nearby prospects and associated with a silicified cap on the main hill. Comparison of coarse and fine fractions, based on a 190 μm size split of 8 kg of -2 mm material, suggests that gold disperses clastically on the steep slopes, probably within silica, but coarse grains break down giving Au concentrations in the finer fractions at the base of the main slope. Discrete gold grains, that can be panned, only occur 1–2 km downstream within the streams and heavy mineral concentrations are very limited. This interpretation of Au dispersion is consistent with the data from 1 kg samples collected at the higher primary grade, but more contaminated, Arapda?i prospect.Antimony is the most consistent pathfinder both for the silicified cap at Sarpda? and for gold-rich veins at Arpada?i. It gives high contrast anomalies. Arsenic is useful being more mobile than Sb, although contrast may be low. High resolution Ag data can be useful but base metal enrichments are also often associated with Ag anomalies. Most prospects have some base metal enrichments although they can be displaced from the main gold-rich parts of the deposit and anomalies may be weak. Lead and Cu are the more consistently useful elements.The use of large (> 8 kg of -2 mm material) samples produces consistent stream sediment data that can be used to reliably interpret single samples and quantify Au anomalies. A survey around the Halíköy Hg and Emirli Sb mines, using these large samples, confirmed the extension of the known gold-bearing Emirli structure. In contrast the major Hg-bearing Halíköy Fault is gold poor although a structure parallel to it is auriferous.     

Understanding geomorphic responses to environmental change: a 19 000‐year case study from semi‐arid central Texas,USA

Understanding the impact of past climatic changes on landscape stability is crucial in order to predict and mitigate the effects of future changes. However, in arid and semi‐arid environments, reconstructions are often hampered by a poor understanding of the relationship between sediment deposition and climate. We present here data from central Texas, a region that is sensitive to environmental change but has received relatively little attention. The study integrates a chronology of 29 optically stimulated luminescence (OSL) ages from six sedimentary sites in a range of depositional contexts with a 19 000 a climate record derived from pollen extracted from the adjacent Boriack Bog. By comparing the two records, we aimed to assess the relationship between climate change and geomorphic activity. Data show that extensive aeolian and colluvial deposition occurred during the mid to late Holocene, with sedimentation generally increasing during more arid phases. However, a number of depositional events on slopes were associated with moister episodes, and sediment was also deposited in a summit setting immediately after phases of increased precipitation. Linkages between climate change and geomorphic response were therefore complex, being controlled by both sediment supply and transport energy. The climatic fluctuations identified in the Boriack Bog record highlight the sensitivity of central Texas to environmental change, while disparities in conditions recorded between it and other palaeoenvironmental sites in the southern USA emphasise the need for further work in order to enhance understanding of landscape sedimentary response to climate. Copyright © 2010 John Wiley & Sons, Ltd.     

Earthquake recurrence on the Calaveras fault east of San Jose, California

Occurrence of small (3 M_L < 4) earthquakes on two 10-km segments of the Calaveras fault between Calaveras and Anderson reservoirs follows a simple linear pattern of elastic strain accumulation and release. The centers of these independent patches of earthquake activity are 20 km apart. Each region is characterized by a constant rate of seismic slip as computed from earthquake magnitudes, and is assumed to be an isolated locked patch on a creeping fault surface. By calculating seismic slip rates and the amount of seismic slip since the time of the last significant (M 3) earthquake, it is possible to estimate the most likely date of the next (M - 3) event on each patch. The larger the last significant event, the longer the time until the next one. The recurrence time also appears to be increased according to the moment of smaller (2 < M_L < 3) events in the interim. The anticipated times of future larger events on each patch, on the basis of preliminary location data through May 1977 and estimates of interim activity, are tabulated below with standard errors. The occurrence time for the southern zone is based on eight recurrent events since 1969, the northern zone on only three. The 95% confidence limits can be estimated as twice the standard error of the projected least-squares line. Events of M 3 should not occur in the specified zones at times outside these limits. The central region between the two zones was the locus of two events (M = 3.6, 3.3) on July 3, 1977. These events occurred prior to a window based on the three point, post-1969 slip-time line for the central region.

Latitude	Longitude	Depth	Mag.	Target date	Standard error (days)
37°17′± 2′N	121°39′±2′W	5.0 ±2 km	3.0–4.0	7-22-77	22.3
37°26′± 2′N	121°47′±2′W	6.0 ± 2 km	3.0–4.0	9-02-77	8.0

Full-size table