Natural background and pollution levels of some heavy metals in soils from the area of Dayton,Ohio

In a reconnaissance study, trace amounts of Cd, Cu, Pb, and Zn were determined in “A-zone” soil from 22 locations in the Dayton, Ohio, area. Soil samples were collected at high-volume air monitoring sites in urban, suburban, and rural areas. Measurable amounts of the elements were found in all of the samples. Positive correlations occur between each metal and particulate matter, with correlation coefficients of aboutr=0.70, at the 99% confidence level. Natural background values for the elements were measured in soil from rural areas. Theoretical background values, which are very close to those measured, were calculated from the individual regression equations. Natural background levels do not exceed 1.00 ppm Cd, 15 ppm Cu, 25 ppm Pb, and 55 ppm Zn. The heavy metal contents of most soils in the area exceed background by factors of up to 3.0 for Cd, up to 4.5 for Cu, up to 11 for Pb, and up to 4.5 for Zn. Significant positive correlations among the metals suggest a common source (or sources) for at least some, if not most, of the heavy metals. For the most part, the highest metal values are found in soils near coal-burning plants. Fly ash from a local plant contains substantial amounts of the elements. The high lead values are largely due to vehicular exhaust. However, there is evidence that the metals can also come from the normal deterioration of vehicles. It appears that airborne pollution is an important source of heavy metals in Dayton area soils.     

Microstructures of deformed grains in the augen gneisses of southern Menderes Massif (western Turkey) and their tectonic significance

A detailed fabric and microstructural analysis of the granitic mylonites was carried out on the southern side of Bes,parmak Mountain north of Selimiye (Milas). The mylonitic augen gneisses have?a blastomylonitic texture characterized by large retort-shape porphyroclasts or augen of feldspars, around which a more ductile, medium to fine-grained matrix of muscovite, biotite, quartz and feldspar is deflected. Feldspars behave in both plastic and brittle fashion, because size reduction occurs through grain boundary migration and/or subgrain rotation, and also through fracturing. Typical “core-and-mantle” structure, characterized by a large feldspar core surrounded by a mantle of fine recrystallized grains, is very characteristic. The majority of plagioclase twins obey the albite-twin law; however, the association with pericline-law twinning suggests that many of the twins are mechanical. Evidence of strain, such as deformation twins, bent or curved twins, undulatory extinction, deformation bands and kink bands occur characteristically in plagioclase. Myrmekite is ubiquitous at K-feldspar grain boundaries, most notably on the long sides of inequant grains parallel to the S-foliation direction, which invariably face the maximum finite shortening direction. Deformation of quartz in mylonitic augen gneisses commonly results in the development of core-and-mantle structure and “type-4” quartz ribbons of elongated, preferably oriented, newly recrystallized quartz aggregates suggesting a primary dynamic recrystallization. Undulatory extinction, deformation bands and lamellae are the strain-related features associated with quartz porphyroclasts. Micas, especially biotite, undergo internal deformation by bend gliding and kinking. Most of the micas are completely attenuated and aligned such that their (001) planes are subparallel or parallel to the margins of quartz ribbons and define the foliation in the rock. These microstructures of feldspars, quartz and mica in the mylonitic augen gneisses in this part of the southern Menderes Massif are broadly consistent with fabric development under upper-greenschist- to lower-amphibolite-facies conditions, rather than almandine–amphibolite facies, as was previously believed. This supports the previous contention of the authors that the protoliths of augen gneisses are younger granitoids and do not represent an exposed Precambrian Pan-African basement in the Menderes Massif.     

Hydrothermally altered hyaloclastites at the Earth’s surface in the rift zone of Iceland: Problem of the biochemogenic accumulation of trace elements

Results of the mineral and chemical study of surface-altered hyaloclastites from the Theistareykir and Nämafjall geothermal zones, the North Iceland rift, are considered. The paper scrutinizes the composition of hydrothermally altered rocks mainly consisting of clay minerals related to the transformation of bedrock hyaloclastites. The clay minerals also make up slope talus or proluvial deltas around highlands. The major clay minerals in areas of the present-day fumarole activity are kaolinite and smectite, while the redeposited talus-proluvial sediments are mainly composed of smectites. The studied rocks contain framboids, globules, rods, and other structures with morphology and size similar to those of mineralized bacteria. The local concentration of Ag in proluvial deposits is attributed to the intense bacterial activity. It is supposed that elevated contents of some trace elements could be related to an intense microbiotic influence.     

Radiating 1.0 Ga Mafic Dyke Swarms of Eastern Brazil and Western Africa: Evidence of Post-Assembly Extension in the Rodinia Supercontinent?

Several mafic dyke swarms of similar composition and age (tholeiite- ca.1.0 Ga) occur on both sides of the Atlantic Ocean in eastern South America and western Africa. When assembled to their pre-drift position in the Mesozoic, the Brazilian coastal dyke province of Bahia, and the African dykes in Cameroun (Ebolowa suite) and Congo (Comba and Sembe-Ouesso provinces) define a giant radiating pattern (1200 km × 800 km) similar to other dyke swarms elsewhere associated with large-scale continental rifting. Magma flow indicators of the Brazilian dykes and branching propagation styles of their African counterparts indicate that the dyke conduits were fed with magmas diverging from a source beneath the long axis of the Meso-Neoproterozoic West-Congolian Basin in Africa. There, MORB-like metabasalts have been described in the La Bikossi Group of the Mayombian Supergroup. Whether the rifting event and intrusion of dyke swarms were triggered or not by a mantle plume beneath part of the Rodinia subcontinental lithosphere remain to be confirmed.     

Characterisation of Memory Effects and Development of an Effective Wash Protocol for the Measurement of Petrogenetically Critical Trace Elements in Geological Samples by ICP-MS

High sensitivity and low detection limits would seem to make inductively coupled plasma-mass spectrometry (ICP-MS) an ideal analytical tool for determining low (sub-μg g^-1) concentrations of the rare earth elements (REE), Y, Zr, Nb, Hf, Ta, Sn, W, Mo, Th, and U in most mafic materials (e.g. Hall and Plant 1992). However, the generally "sticky" nature exhibited by most of the high field strength elements (HFSEs: Zr, Nb, Hf, Ta, Th and U) as well as Sn, W and Mo can result in spurious results due to memory effects transmitted between unknowns and calibration samples. This, in turn, can seriously compromise the sensitivity, accuracy, and precision of ICP-MS analyses for these elements in geological materials. Data resulting from analyses with poor accuracy and precision can lead to erroneous interpretation and misleading petrogenetic modelling. To resolve this problem, we propose an effective wash protocol for these critical trace elements.     

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.     

Alkylation of polycyclic aromatic hydrocarbons in carbonaceous chondrites

Using microprobe laser-desorption, laser-ionization mass spectrometry (μL²MS), we measured the distributions of alkylated and unalkylated polycyclic aromatic hydrocarbons (PAHs) in the free organic material of 20 carbonaceous chondrites. These meteorites represent a variety of meteorite classes and alteration histories, including CI, CK, CM, CO, CR, CV, and Tagish Lake. This work provides information on free organic compounds that is complementary to studies of the structure and composition of meteoritic macromolecular content.For the nine CM2 meteorites analyzed, we observe that higher relative abundances of alkylated PAHs correlate with more intense aqueous activity. We attribute this correlation to the differences in solubility and volatility between unalkylated and alkylated PAHs. Naphthalene and its alkylation series are more susceptible to the effects of aqueous exposure than the less-soluble PAH phenanthrene and its alkylated derivatives. These observations are consistent with the possibility of chromatographic separations on the meteorite parent bodies. We identify six CM2 meteorites with similar PAH distributions that may represent the original, unaltered organic composition of the parent body.Increased metamorphic intensity reduces the abundance of all PAHs. The thermally metamorphosed CK chondrites had no detectable levels of typical meteoritic PAHs. This observation might be explained either by a loss of PAHs caused by volatilization or by a significantly different organic content of the CK parent body.     

Zoning of diamonds from the Mir kimberlite pipe: Results of Fourier-transformed infrared spectroscopy

Plates prepared of diamonds from the Mir kimberlite pipe were examined with FTIR spectroscopy. It is shown that B1 defects were formed by annealing during crystal growth, whereas B2 centers arose after growth cessation. The development of B2 centers in a natural diamond is the secondary process with respect to the aggregation of the nitrogen admixture. The kinetics of this process is related to the breakdown of an oversaturated solid solution. The results obtained make it possible to estimate the temperature and duration of natural diamond growth.     

Laboratory and field evaluation of a flushable oxic limestone drain for treatment of net-acidic drainage from a flooded anthracite mine, Pennsylvania, USA

This paper demonstrates the use of dissolution-rate data obtained in the laboratory to indicate the potential quality of effluent from a field-scale oxic limestone drain (OLD) treatment system for neutralization of dilute acidic mine drainage (AMD). Effluent from the Reevesdale Mine South Dip Tunnel, a large source of AMD and base flow to the Wabash Creek and Little Schuylkill River in the Southern Anthracite Coalfield of east-central Pennsylvania, is representative of AMD with low concentrations but high loadings of dissolved Fe, Al and other metals because of a high flow rate. In January 2003, rapid neutralization of the AMD from the Reevesdale Mine was achieved in laboratory tests of its reaction rate with crushed limestone in closed, collapsible containers (Cubitainers). The tests showed that net-alkaline effluent could be achieved with retention times greater than 3 h and that effluent alkalinities and associated dissolution rates were equivalent for Fe(OH)₃-coated and uncoated limestone. On the basis of the laboratory results, a flushable OLD containing 1450 metric tons of high-purity calcitic limestone followed by two 0.7-m deep wetlands were constructed at the Reevesdale Mine. During the first year of operation, monthly data at the inflow, outflow and intermediate points within the treatment system were collected (April 2006–2007). The inflow to the treatment system ranged from 6.8 to 27.4 L/s, with median pH of 4.7, net acidity of 9.1 mg/L CaCO₃, and concentrations of dissolved Al, Fe and Mn of 1.0, 1.9 and 0.89 mg/L, respectively. The corresponding effluent from the OLD had computed void-volume retention times of 4.5–18 h, with median pH of 6.6, net acidity of −93.2 mg/L CaCO₃, and concentrations of dissolved Al, Fe and Mn of <0.1, 0.08 and 0.52 mg/L, respectively. The wetlands below the OLD were effective for retaining metal-rich solids flushed at monthly or more frequent intervals from the OLD, but otherwise had little effect on the effluent quality. During the first year of operation, approximately 43 metric tons of limestone were dissolved and 2 metric tons of Al, Fe and Mn were precipitated within the OLD. However, because of the accumulation of these metals within the OLD and possibly other debris from the mine, the effectiveness of the treatment system declined. Despite the installation of a flush-pipe network at the base of the OLD to remove precipitated solids, the limestone bed clogged near the inflow. Consequently, a large fraction of the AMD bypassed the treatment system. To promote flow through the OLD, the flush pipes were open continuously during the last 4 months of the study; however, this effluent was only partially treated because short-circuiting through the pipes decreased contact between the effluent and limestone. A reconfiguration of the flow path through the limestone bed from horizontal to vertical upward could increase the limestone surface area exposed to the metal-laden influent, increase the cross-sectional area perpendicular to flow, decrease the flow path for solids removal, and, consequently, decrease potential for clogging.     

pp′-DDT adsorption to suspended particulate matter in sea water

A procedure was devised to study pp′-DDT [2,2-bis($\text{p-}\text{chlorophenyl}$)-1,1,1-trichloroethane] adsorption and desorption to suspended particulates in aqueous solutions. DDT adsorption to a marine sediment, sediment fractions, clay and humic acid suspended in sea water was investigated and the humic fraction was found to have a greater adsorbing capacity than the clay or sediment. Removal of the humic fraction from sediment reduced the adsorption capacity to less than 60 per cent of the original sediment sample. It was concluded that suspended humic particulates may be important agents for transporting chlorinated hydrocarbons through the water column and for concentrating them in sediments and in detritus-feeding organisms.