H-chondrites: Trace element clues to their origin

We have analyzed 10 H-chondrites for 20 trace elements, using RNAA. The meteorites included 4 of petrologic type 4 and 2 each of types 3, 5 and 6.The data show that H-chondrites are not isochemical. H3's are depleted by some 10% not only in Fe (Dodd, 1976), but also in the siderophiles Os, Re, Ir, Ni, Pd, Au, and Ge. Moreover, the abundance pattern of siderophiles varies systematically with petrologic type. As similar fractionations of REE have been observed by Nakamura (1974), it appears that both the proportions and compositions of the main nebular condensates varied slightly during accretion of the H-chondrites. Thus the higher petrologic types are independent nebular products, not metamorphosed descendants of lower petrologic types.Abundances of highly volatile elements (Cs, Br, Bi, Tl, In, Cd, Ar³⁶) correlate with petrologic type, declining by ≤ 10^?3 from Type 3 to Type 6. The trends differ from those for artificially heated Type 3's (Ikramuddinet al., 1977b; Herzoget al., 1979), but agree passably with theoretical curves for nebular condensation. Apparently the low volatile contents of higher petrologic types are a primary feature, not the result of metamorphic loss.The mineralogy of chondrites suggests that they accreted between 405 K (absence of Fe₃O₄) and 560 K (presence of FeS), and the abundances of Tl, Bi, and In further restrict this interval to 420–500 K. Accretion at 1070 ± 100 K, as proposed by Hutchisonet al. (1979, 1980), leads to some extraordinary problems. Volatiles must be injected into the parent body after cooling, which requires permeation of the body by 10¹¹ times its volume of nebular gas. This process must also achieve a uniform distribution of the less volatile elements (Rb, Cu, Ag, Zn, Ga, Ge, Sn, Sb, Se, F), without freezeout in the colder outer layers.Factor analysis of our data shows 3 groupings: siderophiles (Os, Re, Ir, Ni, Pd, Au, and Ge), volatiles (Ag, Br, In, Cd, Bi, and Tl) and alkalis (Rb and Cs). The remaining 5 elements (U, Zn, Te, Se, and Sb) remain unassociated.     

Ore deposits and epithermal evidences associated with intra-magmatic faults at Aïn El Araâr-Oued Belif ring structure (NW of Tunisia)

International Journal of Earth Sciences - Hydrothermal ore deposits at Aïn El Araâr-Oued Belif location are classified as epithermal deposits type. The ore bodies are hosted by upper...     

Assessing rockfall susceptibility in steep and overhanging slopes using three-dimensional analysis of failure mechanisms

Rockfalls strongly influence the evolution of steep rocky landscapes and represent a significant hazard in mountainous areas. Defining the most probable future rockfall source areas is of primary importance for both geomorphological investigations and hazard assessment. Thus, a need exists to understand which areas of a steep cliff are more likely to be affected by a rockfall. An important analytical gap exists between regional rockfall susceptibility studies and block-specific geomechanical calculations. Here we present methods for quantifying rockfall susceptibility at the cliff scale, which is suitable for sub-regional hazard assessment (hundreds to thousands of square meters). Our methods use three-dimensional point clouds acquired by terrestrial laser scanning to quantify the fracture patterns and compute failure mechanisms for planar, wedge, and toppling failures on vertical and overhanging rock walls. As a part of this work, we developed a rockfall susceptibility index for each type of failure mechanism according to the interaction between the discontinuities and the local cliff orientation. The susceptibility for slope parallel exfoliation-type failures, which are generally hard to identify, is partly captured by planar and toppling susceptibility indexes. We tested the methods for detecting the most susceptible rockfall source areas on two famously steep landscapes, Yosemite Valley (California, USA) and the Drus in the Mont-Blanc massif (France). Our rockfall susceptibility models show good correspondence with active rockfall sources. The methods offer new tools for investigating rockfall hazard and improving our understanding of rockfall processes.     

The evolution of the high‐elevated depocenters of the northern Sierras Pampeanas (ca. 28˚ SL), Argentine broken foreland,South‐Central Andes: the Pipanaco Basin

The Pipanaco Basin, in the southern margin of the Andean Puna plateau at ca. 28°SL, is one of the largest and highest intermontane basins within the northernmost Argentine broken foreland. With a surface elevation >1000 m above sea level, this basin represents a strategic location to understand the subsidence and subsequent uplift history of high‐elevation depositional surfaces within the distal Andean foreland. However, the stratigraphic record of the Pipanaco Basin is almost entirely within the subsurface, and no geophysical surveys have been conducted in the region. A high‐resolution gravity study has been designed to understand the subsurface basin geometry. This study, together with stratigraphic correlations and flexural and backstripping analysis, suggests that the region was dominated by a regional subsidence episode of ca. 2 km during the Miocene‐Pliocene, followed by basement thrusting and ca. 1–1.5 km of sediment filling within restricted intermontane basin between the Pliocene‐Pleistocene. Based on the present‐day position of the basement top as well as the Neogene‐Present sediment thicknesses across the Sierras Pampeanas, which show slight variations along strike, sediment aggradation is not the most suitable process to account for the increase in the topographic level of the high‐elevation, close‐drainage basins of Argentina. The close correlation between the depth to basement and the mean surface elevations recorded in different swaths indicates that deep‐seated geodynamic process affected the northern Sierras Pampeanas. Seismic tomography, as well as a preliminary comparison between the isostatic and seismic Moho, suggests a buoyant lithosphere beneath the northern Sierras Pampeanas, which might have driven the long‐wavelength rise of this part of the broken foreland after the major phase of deposition in these Andean basins.     

Timing of vegetation changes at the end of the Holocene Humid Period in desert areas at the northern edge of the Atlantic and Indian monsoon systems

This article aims at discussing the ecological response of the terrestrial and fresh water dependant environments to the installation of arid conditions at the end of the Holocene Humid Period in the Atlantic and Indian monsoon domains. It is mainly focused on dry environments from Chad, Oman and Pakistan where new, high-resolution pollen sequences have been provided. Pollen data show that local hydrological conditions have played a major role in the destruction or survival of tropical tree populations at the end of the Holocene Humid Period, as well as partly explaining the asynchronous pattern of recorded environmental changes in most tropical regions. In desert areas, the response of the fresh water dependant systems to the shift from humid to arid climate conditions appears to have followed a threshold-like pattern. In contrast, terrestrial ecosystems have gradually adapted to increased drought, as shown by the progressive decrease of tropical tree species at Yoa or the gradual expansion in dry plant types in Oman and Pakistan from 6000 cal yrs BP to the present. A remarkable synchroneity in environmental change is recorded at the northern edge of the Atlantic and Indian monsoon systems, with the extreme end of the Holocene Humid Period corresponding to the last occurrence of tropical trees in the desert and the last record of prolonged SW monsoon rainfall over north-western Asia around 4700–4500 cal yrs BP.     

An Overview of Dissolved and Suspended Matter Fluxes in the Loire River Basin: Natural and Anthropogenic Inputs

The spatial and temporal distributions of major elements were investigated in the surface waters and in associated suspended matter at two sites of the upper Loire basin (Orleans and Brehemont) between 1995 and 1998.According to geochemical and isotopic patterns, the dissolved load appears to result from a process of mixing rainwater inputs, weathering processes of carbonate and silicate bedrock, and agricultural and urban inputs. Natural inputs influence 60% of water chemical composition at both sites. Annual dissolved fluxes were estimated to be 1300 10³ t/y at Orleans and 1620 10³ t/y at Brehemont. Major elements are transported mainly in the dissolved fraction. After correcting for atmospheric and anthropogenic inputs, the silicate specific export rate was calculated to be 11 t/y/km² throughout the basin and the carbonate specific export rate to be from 47 t/y/km² at Orleans to 23 t/y/km² at Brehemont.The suspended load appears to result from at least two particle reservoirs: a silicate reservoir and a carbonate reservoir. The silicate reservoir has a detrital origin, mainly during periods of high flow, while the carbonate reservoir has a detrital origin during periods of high flow and an authigenic origin during periods of low flow. Of the total annual flow of suspended matter, this authigenic material represents 16% at Orleans, 25% at Brehemont and 37% in the fluvial part of the estuary. After correcting authigenic inputs, the specific export rate due to mechanical weathering was estimated to be 8 t/y/km² throughout the Loire basin.     

Bacterial dominance of phototrophic communities in a High Arctic lake and its implications for paleoclimate analysis

The phototrophic communities in meromictic, perennially ice-covered Lake A, on Ellesmere Island in the Canadian High Arctic, were characterized by pigment analysis using high performance liquid chromatography. Samples were taken to determine the vertical changes down the water column as well as a variation between years. These analyses showed that Lake A had distinct phototrophic communities in its oxic and anoxic layers. The pigment analyses indicated that phototrophic biomass in the upper, oxic waters was dominated by picocyanobacteria, while in the lower, anoxic layer photosynthetic green sulphur bacteria were dominant. Interannual variation in pigment concentrations was related to the penetration of photosynthetically active radiation in the water column, suggesting that light availability may be limiting the net accumulation of photosynthetic bacterial biomass in Lake A. Pigment analysis of the surface sediments indicated that deposition was dominated by the photosynthetic sulphur bacterial contribution. The sedimentary record of bacterial pigments in polar meromictic lakes offers a promising tool for the reconstruction of past changes in ice cover and therefore in climate.     

Radon emanation of heterogeneous basin deposits in Kathmandu Valley,Nepal

Effective radium-226 concentration (EC_Ra) has been measured in soil samples from seven horizontal and vertical profiles of terrace scarps in the northern part of Kathmandu Valley, Nepal. The samples belong to the Thimi, Gokarna, and Tokha Formations, dated from 50 to 14 ky BP, and represent a diverse fluvio-deltaic sedimentary facies mainly consisting of gravelly to coarse sands, black, orange and brown clays. EC_Ra was measured in the laboratory by radon-222 emanation. The samples (n = 177) are placed in air-tight glass containers, from which, after an accumulation time varying from 3 to 18 days, the concentration of radon-222, radioactive decay product of radium-226 and radioactive gas with a half-life of 3.8 days, is measured using scintillation flasks. The EC_Ra values from the seven different profiles of the terrace deposits vary from 0.4 to 43 Bq kg^?1, with profile averages ranging from 12 ± 1 to 27 ± 2 Bq kg^?1. The values have a remarkable consistency along a particular horizon of sediment layers, clearly demonstrating that these values can be used for long distance correlations of the sediment horizons. Widely separated sediment profiles, representing similar stratigraphic positions, exhibit consistent EC_Ra values in corresponding stratigraphic sediment layers. EC_Ra measurements therefore appear particularly useful for lithologic and stratigraphic discriminations. For comparison, EC_Ra values of soils from different localities having various sources of origin were also obtained: 9.2 ± 0.4 Bq kg^?1 in soils of Syabru–Bensi (Central Nepal), 23 ± 1 Bq kg^?1 in red residual soils of the Bhattar-Trisuli Bazar terrace (North of Kathmandu), 17.1 ± 0.3 Bq kg^?1 in red residual soils of terrace of Kalikasthan (North of Trisuli Bazar) and 10 ± 1 Bq kg^?1 in red residual soils of a site near Nagarkot (East of Kathmandu). The knowledge of EC_Ra values for these various soils is important for modelling radon exhalation at the ground surface, in particular in the vicinity of active faults. Importantly, the study also reveals that, above numerous sediments of Kathmandu Valley, radon concentration in dwellings can potentially exceed the level of 300 Bq m^?3 for residential areas; a fact that should be seriously taken into account by the governmental and non-governmental agencies as well as building authorities.     

Social networks and healthy cities: spreading good practices based on a spanish case study

The city of Vitoria‐Gasteiz in Spain is considered a “healthy city” and has implemented sustainable actions to increase the mobility of its healthcare professionals. The objectives of this study are firstly to account for the use of bicycles at work as a strategy for a healthy city and secondly to propose a conceptual framework for analyzing this network and its capacity to spread their practices The paradigm proposed is that of social networks, within which sharing between contacts is explained by means of two models: the “threshold model” and “opinion leaders”.     

A primitive euhadrosaurian dinosaur from the uppermost Cretaceous of the Ager syncline (southern Pyrenees,Catalonia)

New hadrosaurid material is recorded from Fontllonga (Ager syncline, province of Lleida), in the Catalonian Pyrenees, comprising a dentary with part of the dental battery, recovered from Late Maastrichtian strata (Tremp Formation), close to the presumed Cretaceous/Tertiary boundary. This hadrosaurid is more derived than is Telmatosaurus transsylvanicus from the Haeg Basin (Romania), but lacks a number of features that diagnose the clade Hadrosaurinae plus Lambeosaurinae. It is attributed to the Euhadrosauria on the basis of the following synapomorphies: dentary teeth not recurved distally, narrow dentary crowns, and denticles not supported by subsidiary ridges. The phylogenetic relationships of the best-known iguanodontids and hadrosauroids are evaluated using mandibular and dentary tooth characters. On the basis of a cladistic analysis, the family of Hadrosauridae is diagnosed by more than 29 dentary tooth positions, parallel-sided vertical furrows formed by dentary alveoli, and absence of caudal secondary ridges. Within Hadrosauridae, successive sister-groups of Hadrosaurinae plus Lambeosaurinae are the Fontllonga taxon and Telmatosaurus. The clade Hadrosaurinae plus Lambeosaurinae is characterised mainly by a coronoid process inclined rostrally and by the absence of secondary ridges on dentary crowns. The Fontllonga find suggests the diversity of European hadrosaurids at the end of the Cretaceous to have been greater than previously thought. Moreover, the primitive character of European hadrosaurids as compared to western North American and Asian relatives may be explained in terms of geographical isolation during the Late Cretaceous.