The Wave-Front Correction System for the Sunrise Balloon-Borne Solar Observatory

This paper describes the wave-front correction system developed for the Sunrise balloon telescope, and it provides information about its in-flight performance. For the correction of low-order aberrations, a Correlating Wave-Front Sensor (CWS) was used. It consisted of a six-element Shack??C?Hartmann wave-front sensor (WFS), a fast tip-tilt mirror for the compensation of image motion, and an active telescope secondary mirror for focus correction. The CWS delivered a stabilized image with a precision of 0.04?arcsec (rms), whenever the coarse pointing was better than ???45?arcsec peak-to-peak. The automatic focus adjustment maintained a focus stability of 0.01?waves in the focal plane of the CWS. During the 5.5?day flight, good image quality and stability were achieved during 33?hours, containing 45?sequences, which lasted between 10 and 45?min.     

Authigenic carbonate mineral formation in the Pagassitikos palaeolake during the latest Pleistocene, central Greece

The Pagassitikos Gulf in Greece is a semi-enclosed bay with a maximum depth of 102 m. According to the present-day bathymetric configuration and the sea level during the latest Pleistocene, the gulf would have been isolated from the open sea, forming a palaeolake since ~32 cal. ka b.p. Sediment core B-4 was recovered from the deepest sector of the gulf and revealed evidence of a totally different depositional environment in the lowest part of the core: this contained light grey-coloured sediments, contrasting strongly with overlying olive grey muds. Multi-proxy analyses showed the predominance of carbonate minerals (aragonite, dolomite and calcite) and gypsum in the lowest part of the core. Carbonate mineral deposition can be attributed to autochthonous precipitation that took place in a saline palaeolake with high evaporation rates during the last glacial–early deglacial period; the lowest core sample to be AMS ¹⁴C dated provided an age of 19.53 cal. ka b.p. The palaeolake was presumably reconnected to the open sea at ~13.2 cal. ka b.p. during the last sea-level rise, marking the commencement of marine sedimentation characterised by the predominance of terrigenous aluminosilicates and fairly constant depositional conditions lasting up to the present day.     

A Paddock to reef monitoring and modelling framework for the Great Barrier Reef: Paddock and catchment component

Targets for improvements in water quality entering the Great Barrier Reef (GBR) have been set through the Reef Water Quality Protection Plan (Reef Plan). To measure and report on progress towards the targets set a program has been established that combines monitoring and modelling at paddock through to catchment and reef scales; the Paddock to Reef Integrated Monitoring, Modelling and Reporting Program (Paddock to Reef Program). This program aims to provide evidence of links between land management activities, water quality and reef health. Five lines of evidence are used: the effectiveness of management practices to improve water quality; the prevalence of management practice adoption and change in catchment indicators; long-term monitoring of catchment water quality; paddock & catchment modelling to provide a relative assessment of progress towards meeting targets; and finally marine monitoring of GBR water quality and reef ecosystem health. This paper outlines the first four lines of evidence.     

Sediment modelling with fine temporal and spatial resolution for a hilly catchment

The suitability of the physically based model SHETRAN for simulating sediment generation and delivery with a high degree of spatial (20 m) and temporal (sub‐hourly) resolution was assessed through application of the model to a 167‐km² catchment leading to an estuary in New Zealand. By subdividing the catchment and conducting calculations on a computer cluster for a 6‐month hydrology initialisation period, it was possible to simulate a large rainfall event and its antecedent conditions in 24 h of computation time. The model was calibrated satisfactorily to catchment outlet flow and sediment flux for a large rainfall event in two subcatchments (~2 km²). Validation for a separate subcatchment was successful for flow (Nash–Sutcliff efficiency of 0.84) with a factor 2.1 over‐prediction for sediment load. Validation for sediment at full catchment scale using parameters from the subcatchment scale was good for flow but poor for sediment, with gross under‐estimation of the dominant stream sources of sediment. After recalibration at catchment scale, validation for a separate event gave good results for flow (Nash–Sutcliff efficiency of 0.93) and sediment load within a factor of two of measurements. An exploratory spatially explicit landslide model was added to SHETRAN, but it was not possible to test this fully because no landslides were observed in the study period. Application to climate change highlighted the non‐linear response to extreme rainfall. However, full exploration of land use and climate change and the evaluation of uncertainty were severely constrained by computational limitations. Subdivision of the catchment with separate stream routing is suggested as a way forward to overcome these limitations. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface wave array tomography in SE Tibet from ambient seismic noise and two-station analysis – II. Crustal and upper-mantle structure

We determine the 3-D shear wave speed variations in the crust and upper mantle in the southeastern borderland of the Tibetan Plateau, SW China, with data from 25 temporary broad-band stations and one permanent station. Interstation Rayleigh wave (phase velocity) dispersion curves were obtained at periods from 10 to 50 s from empirical Green's function (EGF) derived from (ambient noise) interferometry and from 20 to 150 s from traditional two-station (TS) analysis. Here, we use these measurements to construct phase velocity maps (from 10 to 150 s, using the average interstation dispersion from the EGF and TS methods between 20 and 50 s) and estimate from them (with the Neighbourhood Algorithm) the 3-D wave speed variations and their uncertainty. The crust structure, parametrized in three layers, can be well resolved with a horizontal resolution about of 100 km or less. Because of the possible effect of mechanically weak layers on regional deformation, of particular interest is the existence and geometry of low (shear) velocity layers (LVLs). In some regions prominent LVLs occur in the middle crust, in others they may appear in the lower crust. In some cases the lateral transition of shear wave speed coincides with major fault zones. The spatial variation in strength and depth of crustal LVLs suggests that the 3-D geometry of weak layers is complex and that unhindered crustal flow over large regions may not occur. Consideration of such complexity may be the key to a better understanding of relative block motion and patterns of seismicity.     

Back to the Future? Planning for environmental outcomes and the new Caring for our Country program

The Australian government Caring for our Country (CfoC) program, first announced in 2008, has sought to build on and enhance previous experience with Australian natural resource management policy. This paper critically examines the initial design, planned delivery, and first round of competitive funding outcomes of the new program. This analysis shows that the initial design and delivery of the CfoC model was ad hoc, politicised, and lacking in transparency. The paper concludes that a more systematic and transparent approach for achieving sustainable environmental outcomes is required in order for this new program to achieve its intended objectives. These implications are of interest to Australian and international geographers, natural resource planners, scientists and policy makers concerned with the design, delivery and outcomes of large natural resource and environmental management programs.     

B-spline modeling of VTEC over Turkey using GPS observations

In this study we propose two approaches to model the Vertical Total Electron Content (VTEC) of the ionosphere with quadratic B-spline functions. For the 2-D case, VTEC is modeled in a Sun-fixed reference frame. In the 3-D approach, the 2-D model is extended to represent the temporal variations in an Earth-fixed reference frame. The localizing features of B-splines allow resolving finer structures for the regions with a sufficient number of observations by increasing the level of functions. To reduce the effects of outliers, Iteratively Re-weighted Least Squares (IRLS) with a bi-square weighting function as a robust regression algorithm is applied for parameter estimation. Another iterative method LSQR is performed for the solution of the linear systems providing a regularization effect for ill-conditioned problems. B-spline approaches are applied to real data obtained from the ground-based GPS observations over Turkey. Results are compared with the solutions of the Bernese GPS Software.     

Intrusion versus inversion—a 3D density model of the southern rim of the Northwest German Basin

An unsolved problem of regional importance for both the evolution and structure of the Northwest German Basin is the existence or non-existence of the so-called Bramsche Massif. Explaining the nature of this massif and the cause of a related strong, positive Bouguer anomaly (Bramsche Anomaly) is critical. In the study described here, we tested an existing “intrusion model” against a newer “inversion model” in the southern Northwest German Basin. In the intrusion model, the strongly-positive Bouguer anomaly represents the gravity effect of an intrusion at depths between 6 and 10 km. More recent interpretations invoke tectonic inversion rather than intrusion to explain increased burial and the low level of hydrocarbon maturity found in boreholes. We tested these different interpretations by constructing 3D forward density models to 15 km depth. The intrusion model was updated and adjusted to incorporate recent data and we also modelled pre-Zechstein structures using different scenarios. The final model has a very good fit between measured and modelled gravity fields. Based on currently available seismic and structural models, as well as borehole density measurements, we show that the positive Bouguer anomaly cannot be modeled without a high-density, intrusive-like body at depth. However, further in-sight into the crustal structures of the Bramsche region requires more detailed investigations. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Systematic differences between VTEC obtained by different space-geodetic techniques during CONT08

The ionosphere is a dispersive medium for microwaves, and most space-geodetic techniques using two or more signal frequencies can be applied to extract information on ionospheric parameters, including terrestrial as well as satellite-based GNSS, DORIS, altimetry, and VLBI. Because of their different sensitivity regarding ionization, their different spatial and temporal data distribution, and their different signal paths, a joint analysis of all observation types seems reasonable and promises the best results for ionosphere modeling. However, it has turned out that there exist offsets between ionospheric observations of the diverse techniques mainly caused by calibration uncertainties or model errors. Direct comparisons of the information from different data types are difficult because of the inhomogeneous measurement epochs and locations. In the approach presented here, all measurements are combined into one ionosphere model of vertical total electron content (VTEC). A variance component estimation is applied to take into account the different accuracy levels of the observations. In order to consider systematic offsets, a constant bias term is allowed for each observation group. The investigations have been performed for the time interval of the CONT08 campaign (2 weeks in August 2008) in a region around the Hawaiian Islands. Almost all analyzed observation techniques show good data sensitivity and are suitable for VTEC modeling in case the systematic offsets which can reach up to 5 TECU are taken into account. Only the Envisat DORIS data cannot provide reliable results.