The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

Short-Term Benthic Recolonization after Dredging in the Harbour of Ceuta, North Africa

Abstract. The benthic recovery after dredging (area: 2625 m²) was studied in a polluted and enclosed area of the harbour of Ceuta, in which the recolonization through the water column (larvae and adult bedload transport) could be limited by the lack of renewal. The benthos was sampled at two sites (control and dredged) using a van Veen grab and adopting a BACI (Before, After, Control, Impacted) approach. Five samplings were conducted after dredging (3, 15, 30, 90, 180 days). The proportion of gravel in the sediment of the dredged site increased after dredging, while the organic matter decreased. The impact on the community was estimated at species level, using both univariate and multivariate analyses. The maximum negative effect on benthic macrofauna was a reduction by 65% for species richness (15 days after dredging) and by 75% for abundance (3 days after dredging). Between 15 and 30 days after dredging, the abundance of some species such as the molluscs Parvicardium exiguum and Retusa obtusa and the polychaete Pseudomalacoceros tridentata increased considerably in the dredged site, while typical ‘opportunistic’ species such as Capitella capitata were disfavoured by the disturbance. For this small‐scale dredging, about 6 months are required for the disturbed area to re‐establish a sediment structure and a macrobenthic community similar to the undisturbed area. Small‐patch dredging operations are proposed in harbour management whenever possible, since they allow a quick re‐adjustment of the initial sediment structure and benthic communities.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Retention of arsenic and phosphorus in iron-rich concretions of Tagus salt marshes

Iron-rich concretions are frequently found around plant roots in Tagus estuary (Portugal) where radial delivery of O₂ takes place. Salt marsh sediments exhibit cracks that are an additional feature to introduce O₂ and other solutes in the upper sediments. Metal concentrations in salt marsh sediments are clearly above the background levels reflecting the anthropogenic sources from a large city with 2.5 million inhabitants, and several industrial centres. In order to evaluate how both oxidised structures influences the redistribution of redox sensitive elements in salt marsh sediments, concretions were collected from roots of Halimione portucaloides below the oxygenated zone. These tubular cylindrical structures were analysed for Fe, Al, Mn, As, and P along 1-cm radial transect in a millimetre scale from the inner part to the adjacent anoxic sediment. In addition, oxidised cracks were analysed for the same spatial resolution, from the sediment–water interface to anoxic layers (2-cm transept). The parallelism between Fe, As, and P concentrations at this microscale is the most noticeable aspect. Iron and As presented very high concentrations in the 4-mm concretions (3.4 mmol g⁻¹ and 3.1 μmol g⁻¹, respectively) and decreased sharply to the host sediment. Oxygen released from roots oxidise the solid sulphides, and the reduced Fe and As are transported towards the root by both diffusion and pore water flow associated with the root water uptake. Subsequently, Fe(III) precipitates and As is retained by sorption and/or coprecipitation. These elements are also enriched in the first 2-mm of oxidised cracks, but in lower concentrations (50% and 30%, respectively). Manganese concentrations in concretions were low (11.8 μmol g⁻¹), indicating that Fe dominates the sediment chemistry. Phosphorus and iron concentrations in the ascorbate fraction were higher in the oxidising surfaces of concretions (10.7 μmol g⁻¹ and 1.6 mmol g⁻¹, respectively) and of cracks (5.1 μmol g⁻¹ and 0.47 mmol g⁻¹). The parallelism of Fe and As distributions includes not only their similar redox chemistries, but also that to phosphate, including control by coprecipitation of the host iron phases. The mechanisms involved in the mobilisation of As and P are however different, whereas As comes from the oxidation of iron sulphides; dissolved P derives from reduction of ferri-hydroxide phases.