加拿大不列颠哥伦比亚省温哥华岛纳奈莫群的帆翼龙类化石

An unusual jaw found in a calcite nodule from Collishaw Point, Hornby Island, British Columbia (off the east coast of Vancouver Island) represents the first definitive pterosaur found in British Columbia, and the first istiodactylid from Canada.     

Evaluation of acetylcholinesterase activity in several zooplanktonic crustaceans

Zooplankton are an essential component of the marine and estuarine food chains. The ecotoxicological risk to zooplanktonic communities, estimated through the use of the biomarkers, can be used as an early warning signal of a potential alteration of the ecosystem health. The aim of this project was to evaluate the potential use of several biomarkers (esterases, mixed function oxidases, porphyrins) in zooplanktonic organisms. The acetylcholinesterase activity (AChE) was determined in homogenates of whole organisms of 10 different zooplanktonic crustaceans. Mean activity of AChE was 10.05 micromol/min/g for Acartia margalefi; 3.30 for Acartia latisetosa; 79.70 for Siriella clausi; 49.97 for Diamysis bahirensis; 7.48 for Siriella armata; 14.20 for Mysidopsis gibbosa; 4.49 for Euphausia crystallorophias; 1.66 for Euphausia superba; 2.74 for Streetsia challengeri; 13.26 for Meganycthiphanes norvegica. The species moreover showed a linear increase in enzyme activity in relation to the increase in sample concentration. The key result of this study concerns the different AChE activity basal values of the crustaceans' different species.     

Measuring proton energies and fluxes using EIT (SOHO) CCD areas outside the solar disk images

An indirect proton flux measuring tool based on discrimination of the energy deposited by protons in 128 × 128 pixel EIT CCD areas outside the solar disk images is presented. Single pixel intensity events are converted into proton incident energy flux using modeled energy deposition curves for angles of incidence ±60° in four EIT spatial areas with different proton stopping power. The extracted proton flux is corrected for both the loss of one‐pixel events in the range of angles of incidence as well as for the contribution to the single pixel events resulting from scattered middle‐energy protons (low‐energy or high‐energy particles are stopped by the EIT components or pass through them, accordingly). A simple geometrical approach was found and applied to correct for a non‐unique relation between the proton‐associated CCD output signal and the incident proton energy. With this geometrical approximation four unique proton incident energy ranges were determined as 45–49, 145–154, 297–335, and 390–440 MeV. The indirect proton flux measuring tool has been tested by comparing Solar Energetic Particles (SEP) flux temporal profiles extracted from the EIT CCD frames and downloaded from the GOES database for the Bastille Day (BD) of 2000 July 14 and the more recent 2005 January 20 events. The SEP flux temporal profiles and proton spectra extracted from the EIT in the relatively narrow energy ranges between 45 and 440 MeV reported here are consistent with the related GOES profiles. The four additional EIT extracted ranges provide higher energy resolution of the SEP data. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrodynamical simulations of Galactic fountains – I. Evolution of single fountains

The ejection of the gas out of the disc in late-type galaxies is related to star formation and is due mainly to Type II supernovae. In this paper, we studied in detail the development of the Galactic fountains in order to understand their dynamical evolution and their influence on the redistribution of the freshly delivered metals over the disc. To this aim, we performed a number of 3D hydrodynamical radiative cooling simulations of the gas in the Milky Way where the whole Galaxy structure, the Galactic differential rotation and the supernova explosions generated by a single OB association are considered. A typical fountain powered by 100 Type II supernovae may eject material up to ∼2 kpc which than collapses back mostly in the form of dense, cold clouds and filaments. The majority of the gas lifted up by the fountains falls back on the disc remaining within a radial distance  Δ R = 0.5 kpc  from the place where the fountain originated. This localized circulation of disc gas does not influence the radial chemical gradients on large scale, as required by the chemical models of the Milky Way which reproduce the metallicity distribution without invoking large fluxes of metals. Simulations of multiple fountains fuelled by Type II supernovae of different OB associations will be presented in a companion paper.     

Output-only identification of the modal and physical properties of structures using free vibration response

The viability of a complete structural characterization of civil structures is explored and discussed. In particular, the identification of modal (i.e. natural frequencies, damping ratios and modal shapes) and physical properties (i.e. mass and stiffness) using only the structure’s free decay response is studied. To accomplish this, modal analysis from free vibration response only (MAFVRO) and mass modification (MM) methodologies are engaged along with Wavelet based techniques for optimal signal processing and modal reconstruction. The methodologies are evaluated using simulated and experimental data. The simulated data are extracted from a simple elastic model of a 5 story shear building and from a more realistic nonlinear model of a RC frame structure. The experimental data are gathered from shake table test of a 2-story scaled shear building. Guidelines for the reconstruction procedure from the data are proposed as the quality of the identified properties is shown to be governed by adequate selection of the frequency bands and optimal modal shape reconstruction. Moreover, in cases where the structure has undergone damage, the proposed identification scheme can also be applied for preliminary assessment of structural health.     

A new approach of selecting real input ground motions for seismic design: The most unfavourable real seismic design ground motions

This paper presents a new way of selecting real input ground motions for seismic design and analysis of structures based on a comprehensive method for estimating the damage potential of ground motions, which takes into consideration of various ground motion parameters and structural seismic damage criteria in terms of strength, deformation, hysteretic energy and dual damage of Park & Ang damage index. The proposed comprehensive method fully involves the effects of the intensity, frequency content and duration of ground motions and the dynamic characteristics of structures. Then, the concept of the most unfavourable real seismic design ground motion is introduced. Based on the concept, the most unfavourable real seismic design ground motions for rock, stiff soil, medium soil and soft soil site conditions are selected in terms of three typical period ranges of structures. The selected real strong motion records are suitable for seismic analysis of important structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake, as they can cause the greatest damage to structures and thereby result in the highest damage potential from an extended real ground motion database for a given site. In addition, this paper also presents the real input design ground motions with medium damage potential, which can be used for the seismic analysis of structures located at the area with low and moderate seismicity. The most unfavourable real seismic design ground motions are verified by analysing the seismic response of structures. It is concluded that the most unfavourable real seismic design ground motion approach can select the real ground motions that can result in the highest damage potential for a given structure and site condition, and the real ground motions can be mainly used for structures whose failure or collapse will be avoided at a higher level of confidence during the strong earthquake. Copyright © 2007 John Wiley & Sons, Ltd.     

Simulating future Caspian sea level changes using regional climate model outputs

We report on simulations of present-day climate (1961–1990) and future climate conditions (2071–2100, Special Report on Emissions Scenario A2) over the Caspian sea basin with a regional climate model (RCM) nested in time-slice general circulation model (GCM) simulations. We also calculate changes (A2 scenario minus present-day) in Caspian sea level (CSL) in response to changes in the simulated hydrologic budget of the basin. For the present-day run, both the GCM and RCM show a good performance in reproducing the water budget of the basin and the magnitude of multi-decadal changes in CSL. Compared to present-day climate, in the A2 scenario experiment we find an increase in cold season precipitation and an increase in temperature and evaporation, both over land and over the Caspian sea. We also find a large decrease of CSL in the A2 scenario run compared to the present-day run. This is due to increased evaporation loss from the basin (particularly over the sea) exceeding increased cold season precipitation over the basin. Our results suggest that the CSL might undergo large changes under future climate change, leading to potentially devastating consequences for the economy and environment of the region.     

Biostratigraphy and depositional facies of the Cretaceous-Tertiary boundary strata in Amakusa-Shimojima,Kyushu, Western Japan

The Upper Himenoura Subgroup exposed in the island of Amakusa-Shimojima, Kyushu, Japan shows an example of the terminal Cretaceous stratigraphic record in the circum Pacific region. This sequence is a part of the Upper Cretaceous intra-arc basins of southwest Japan. Four cycles of upward coarse-graded facies are recognized. Each cycle consists of a basinal mud facies in the lower part and a tide-dominated shallow marine to brackish coarse clastic facies in the upper part. Biostratigraphic correlation chiefly based on ammonites, inocerami and trigoniids indicates that this sequence is Campanian to Maastrichtian in age. The occurrence of the above three fossils decreases upward and is terminated at the top of the sequence, being replaced by a molluscan assemblage similar to the Danian. This suggests that the sedimentation may have continued to the very end of the Cretaceous period and possibly to the beginning of the Tertiary.     

Coherent integration time limit of a mobile receiver for indoor GNSS applications

There is an emerging requirement for processing global navigation satellite system (GNSS) signals indoor where the signal is very weak and subjected to spatial fading. Typically, longer coherent integration intervals provide the additional processing gain required for the detection and processing of such weak signals. However, the arbitrary physical motion of the handset imputed by the user limits the effectiveness of longer coherent integration intervals due to the spatial decorrelation of the multipath-faded GNSS signal. In this paper, limits of coherent integration due to spatial decorrelation are derived and corroborated with experimental verification. A general result is that the processing gain resulting from direct coherent integration saturates after the antenna has moved through a certain distance, which for typical indoor propagation, is about half a carrier wavelength. However, a refined Doppler search coupled with a prolonged coherent integration interval extends this limit, which is effectively a manifestation of selective diversity.