Copper, lead and cadmium in coastal waters of the western North Sea

Cadmium, lead and copper have been determined in both dissolved and particulate phases for 130 surface-water samples from the coastal zone of Scotland and England in the western North Sea. The concentrations reported are, in general, lower than those published previously for the same area.The distribution of total metal concentration between the dissolved and particulate phases varies for the three elements. The lead distribution is dominated by its associations with particulate material while cadmium shows the reverse behaviour, existing almost totally in the dissolved phase. Copper is intermediate in behaviour, with the dissolved phase generally being dominant.An inverse relationship between salinity and dissolved copper concentration suggests a freshwater origin for this element. It is suggested that sedimentary and/or anthropogenic sources affect dissolved copper concentrations in coastal waters. The dissolved lead distribution reveals plumes of contaminated coastal water. The lead distribution is, however, dominated by associations with particulate material and sediments which produce a sharp concentration gradient close to the coast. The Humber estuary is identified as a significant source of cadmium to the North Sea.     

Hydroacoustic Field of a Point Source in an Inhomogeneous Marine Medium Containing a Cylindrical Body Floating on the Surface

We study the problem of determination of the sound field of a point harmonic source in the coastal zone and the influence of a cylindrical body floating above the source on the sound field formed in the marine medium. A numerical-analytic method is proposed for the determination of the velocity potential. According to this method, the unknown coefficients in the general solution of the problem are determined from the corresponding infinite system of linear algebraic equations by the method of reduction. We present results of numerical calculations for a special case of a waveguide whose parameters are typical of the coastal part of the sea and perform the comparative analysis of the data obtained as a result of variation of the indicated parameters.     

Preliminary attempt to characterize the rotation of seafloor in the Pito Deep area of the Easter Microplate using a submersible magnetometer

Several mechanisms have been proposed to account for the rotation of the nearly north-south abyssal hill fabric formed on the East Pacific Rise north of the Easter Microplate to the nearly east-west trends in the northern microplate interior. Proposed mechanisms include rigid microplate rotation, transform fault – parallel shear, and bookshelf faulting during the transfer of lithosphere from the Nazca Plate to the microplate. We used a submersible magnetometer on a NAUTILE dive program to measure the magnetic vector rotation of a pillow basalt and dike spur near Pito Deep, the present location of the tip of the propagating rift system that created the microplate. Our results, although too limited to draw strong conclusions from, suggest clockwise rotations of the seafloor magnetic vectors inconsistent with the transform-parallel shear model, and larger than can be explained solely by rigid microplate rotation.     

Spatial variation of the intertidal sediments and macrozoo-benthic assemblages along Eighty-mile Beach, North-western Australia

The extensive intertidal flats along Eighty-mile Beach in North-western Australia appear to be monotonous and homogeneous and seem ideally suited to study tidal zonation in macrozoo-benthic communities and their possible correlates with characteristics of the sediment. In October 1999, we sampled benthic invertebrates and sediments at a total of 895 sampling stations distributed over six different locations, each location separated by 15 km of unsampled foreshore along Eighty-mile Beach. To test for the presence or absence of patterns of tidal zonation (distinct height-related zones of specific sediment grain sizes or zoobenthic taxonomic groups) or patchiness (distinct patches of specific sediment grain sizes or zoobenthic taxonomic groups not related to tidal height) each location was divided into three along-shore sections and each section (transect) was examined at two or three tidal heights. Zonation was observed for sediment grain sizes. Sediments were coarser at the highest intertidal level and finer towards the low water line. Benthic assemblages also differed among tidal heights, but in terms of species-composition the differences were not consistent among the locations. Each location supported a unique collection of benthic invertebrates. Therefore the hypothesis of the presence of distinct zones of specific species or zoobenthic taxonomic groups was rejected; the presence of benthic patches was confirmed. The distribution of sediments and the composition of benthic assemblages were surprisingly poorly correlated compared to those reported in 12 previous quantitative studies around the world. One possible explanation might be that super-cyclone Vance, which hit the study-area only six months before this study, contributed to this poor correlation. Alternatively, the poor correlation may indicate that biotic interactions are more important than the assumed abiotic structuring.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

Free spanning analysis of offshore pipelines

A rigorous procedure was established on the free span analysis of offshore pipelines. The closed form solutions of the beam–column equation, considering tension and compressive force, were derived for the various possible boundary conditions. The solutions can be used to find the natural frequencies of the free spans using the energy balance concept. The results can be applied to improve the current design codes. The improved procedure will yield more realistic calculations of the allowable free span lengths of offshore pipelines. Some calculations are included to present the sensitivity of the axial forces on the allowable free spanning lengths.     

Seismic evidence of small-scale lacustrine drifts in Lake Baikal (Russia)

High resolution, single-channel seismic sparker profiles across the Akademichesky Ridge, an intra-basin structural high in Lake Baikal (Russia), reveal the presence of small sediment mounds and intervening moats in the upper part of the sedimentary cover. Such features interrupt the generally uniform and even acoustic facies and are not consistent with the hemipelagic sedimentation, which is expected on such an isolated high and which would produce a uniform sediment drape over bottom irregularities. The influence of turbidity currents is excluded since the ridge is an isolated high elevated more than 600-1000 m above adjacent basins. The mounded seismic facies, including migrating sediment waves and non-depositional/erosional incisions, strongly suggest that sediment accumulation was controlled by bottom-current activity. We interpret the mounds as small-scale (< few tens of km² in area) lacustrine drifts. Four basic types of geometry are identified: 1) slope-plastered patch sheets; 2) patch drifts; 3) confined drifts; 4) fault-controlled drifts. The general asymmetry in the sedimentary cover of the ridge, showing thicker deposits on the NW flank, and the common location of patch drifts on the northeast side of small basement knolls indicate that deposition took preferentially place at the lee sides of obstacles in a current flowing northward or sub-parallel to the main contours. Deep-water circulation in the ridge area is not known in detail, but there are indications that relatively cold saline water masses are presently flowing out of the Central Basin and plunging into the deep parts of the North Basin across the ridge, a process that appears to be driven mainly by small differences in salinity. We infer that the process responsible for the observed bottom-current-controlled sedimentary features has to be sought in these large-scale water-mass movements and their past equivalents. The age of the onset of the bottom-current-controlled sedimentation, based on an average sedimentation rate of 4.0 cm/ky, is roughly estimated to be as least as old as 3.5 Ma, which is generally regarded as the age of the onset of the last major tectonic pulse of rift basin development in the Baikal region.     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

Circalittoral Macrobenthic Assemblages of Strymonikos Gulf (North Aegean Sea)

Abstract. Six macrobenthic assemblages of the circalittoral zone found in Strymonikos Gulf, North Aegean Sea, are described and compared with the corresponding ones from other Mediterranean and Atlantic areas. For the delimination of these assemblages and the evaluation of the major environmental gradients governing their distribution, several numerical techniques were used.