赣东北前震旦纪陆内叠加褶皱

江南古陆与华夏古陆拼接带北西侧前震旦纪地层中存在着近东西向褶皱叠加在早期近南北向褶皱上的现象,这是怀玉地块向西拼贴、华夏古陆向北西碰撞拼接过程中构造应力向陆内传递时形成的构造变形系统。叠加褶皱与拼接带具有成生联系,且各自代表了不同构造部位的变形特点。这一构造系统形成于前震旦纪,可能与格林威尔(Grenville)造山运动相当。     

System identification of the Vincent Thomas suspension bridge using earthquake records

The Vincent Thomas Bridge in the Los Angeles metropolitan area, is a critical artery for commercial traffic flow in and out of the Los Angeles Harbor, and is at risk in the seismically active Southern California region, particularly because it straddles the Palos Verdes fault zone. A combination of linear and non‐linear system identification techniques is employed to obtain a complete reduced‐order, multi‐input–multi‐output (MIMO) dynamic model of the Vincent Thomas Bridge based on the dynamic response of the structure to the 1987 Whittier and 1994 Northridge earthquakes. Starting with the available acceleration measurements (which consists of 15 accelerometers on the bridge structure and 10 accelerometers at various locations on its base), an efficient least‐squares‐based time‐domain identification procedure is applied to the data set to develop a reduced‐order, equivalent linear, multi‐degree‐of‐freedom model. Although not the main focus of this study, the linear system identification method is also combined with a non‐parametric identification technique, to generate a reduced‐order non‐linear mathematical model suitable for use in subsequent studies to predict, with good fidelity, the total response of the bridge under arbitrary dynamic environments. Results of this study yield measurements of the equivalent linear modal properties (frequencies, mode shapes and non‐proportional damping) as well as quantitative measures of the extent and nature of non‐linear interaction forces arising from strong ground shaking. It is shown that, for the particular subset of observations used in the identification procedure, the apparent non‐linearities in the system restoring forces are quite significant, and they contribute substantially to the improved fidelity of the model. Also shown is the potential of the identification technique under discussion to detect slight changes in the structure's influence coefficients, which may be indicators of damage and degradation in the structure being monitored. Difficulties associated with accurately estimating damping for lightly damped long‐span structures from their earthquake response are discussed. The technical issues raised in this paper indicate the need for added spatial resolution in sensor instrumentation to obtain identified mathematical models of structural systems with the broadest range of validity. Copyright © 2003 John Wiley & Sons, Ltd.     

分形学:现代地图学的非线性数学分析方法

分析了地图学的传统数学分析方法，讨论了对象复杂性与方法简单化的矛盾，阐述了分形几何学，为现代地图学研究的定量化、系统化提供了新的数学分析方法。     

太阳耀斑的GPS监测方法及实例分析

利用GPS伪距与载波相位联合数据处理的方法，分析了2000年7月14日太阳耀斑爆发期间，武汉、北京、乌鲁木齐GPS观测数据得到的电离层TEC，提出了利用多项式拟合计算由耀斑引起的电离层TEC增加量的方法。     

利用GPS组合观测值建立区域电离层模型研究

介绍了VTEC模型的基本原理，给出了三种利用载波相位观测值改善伪距观测值精度的方法，利用三种组合观测值分别建立VTEC模型，并与利用伪距观测值计算的VTEC模型的精度进行比较。     

DLT程序设计与应用

在近景摄影测量直接线性变换原理的基础上，加入附加条件建立附加有平行条件的直接线性变换函数模型，探讨了在解算过程中用数据探测法剔除粗差，用验后补偿的方法补偿系统误差的实现。鉴于非量测像机在近景摄影洲量中应用导致直接线性变换解法的重要性和实用性及数据量大、解算过程过于复杂的情况。用VC 编制了直接线性变换的解算程序，对其关键的方法和用法进行了说明。     

京珠高速公路东西湖段软基处理数值分析

采用等效地基固结系数法,对京珠高速公路东西湖段软土地基,进行了比奥固结平面有限元分析。计算值与实测值比较接近。计算结果为选择地基处理措施和确定道面施工时间提供了依据,保证了竣工后该路段的工后沉降满足设计要求。     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。     

济宁二号矿孤岛工作面冲击矿压危险及其控制

孤岛工作面及其周围巷道附近应力集中程度高,顶板运动剧烈,再加上地质构造的影响,采深较大时,冲击危险程度就高,很容易引发冲击矿压。《煤矿安全规程》要求孤岛工作面按冲击矿压危险工作面来管理。孤岛工作面冲击矿压危险检测预报及控制的技术是先分析冲击危险程度,确定冲击危险指数,提出早期预报;采用电磁辐射和钻屑法进行及时预报;采用卸压爆破进行处理,并采用电磁辐射和钻屑法检验防治措施的效果。实践证明,这套技术安全、可靠、有效,能够保证工作面的安全高效生产。