Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

A pockmark field in the Patras Gulf (Greece) and its activation during the 14/7/93 seismic event

During a recent oceanographical-geophysical survey carried out in the southeastern part of the Gulf of Patras in Western Greece for the construction of an outfall, an active pockmark field was found. The pockmark field was formed in soft layered Holocene silts. The pockmarks are associated with acoustic anomalies attributed to gas-charged sediments. The pockmarks vary in size and shape from 25 to 250 m in diameter and from 0.5 to 15 m in depth and are among the largest and deepest observed in the world.

On July 14th, 1993, during the survey, a major earthquake of magnitude 5.4 on the Richter scale occurred in the area. During the 24 hour period prior to the earthquake the bottom water temperature anomalously increased on three occasions, whilst for a few days after the earthquake it was noted that the majority of the pockmarks were venting gas bublles.

It is considered that the three abrupt sea-water temperature increases were probably the result of upward migrating high-temperature gas bubbles in the water column. It is further suggested that the earthquake was the triggering mechanism and that the gas expulsion was caused by the reduction in the pore volume in the sediments resulting from changes in the stress regime prior to the earthquake. Therefore, it can be suggested that in seismic areas adjacent to pockmark fields, earthquake prediction may be achieved by monitoring the water temperature and/or the rate of gas venting in the pockmark field.

Our analysis indicates that the pockmark field in the Patras Gulf has formed slowly during the Holocene by continuous gas venting, which is periodically being interrupted by short-duration events of enhanced gas seepage triggered by earthquakes.     

Geomorphology and sedimentology of the continental shelf adjacent to Mac. Robertson Land,East Antarctica: A scalped shelf

During the Quaternary, the Mac. Robertson shelf of East Antarctica was deeply eroded by glaciers and currents exposing the underlying basement, resulting in a scalped shelf. Major geomorphic zones are: (1) high-relief, ridge and valley topography (200–1400 m); (2) smooth sea floors associated with low-energy, depositional shelf valleys and basins (400–800 m); (3) low-relief, planated banktops (100–200 m); and (4) iceberg gouged and current reworked seaward-bank margins and upper slope (200 to < 630 m). About 90% of the shelf's surface has net erosional conditions and about 10% is net depositional. The sedimentary processes and deposits may be common to large areas of the East Antarctic margin.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

Experimental investigation of the combustive sound source

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source     

Time-domain simulation of large-amplitude response of floating platforms

Two numerical simulation models to predict large-amplitude motions of floating platforms are presented. The first method is based on the application of the relative-velocity formulation of Morison's equation for force calculations. The second method developed in this work uses the three-dimensional potential theory in time domain. In this method, both the Froude-Krylov and scattering forces are calculated by considering finite wave amplitude effects in random waves. The effect of various nonlinearities on the low-frequency motions and high-frequency tether-tension response of a tension leg platform are studied using these simulation models in conjunction with power spectral methods. The presence of current and the nonlinear drag force are observed to have a significant effect on the low-frequency motions and tether tensions.     

Submersible observations of an iceberg pit and scour on the Grand Banks of Newfoundland

An elongated sea bed depression (pit), 80 by 125 m and 10 m deep located on the Grand Banks of Newfoundland was identified on high resolution surficial geophysical survey lines and investigated using a manned submersible. The pit occurs at the termination of a long (greater than 3 km) iceberg scour, 1.5 m deep, and 80 m wide in 91 m of water. It is similar to other depressions in the region that indent the sea bed up to seven times deeper than the surrounding deepest iceberg furrows. The pit is interpreted to be the sea bed response to impact and loading by a rolling and grounding iceberg. The iceberg scour and pit appear to be of recent origin.     

Dynamic response of dolos armor units to drop test impact loads

Dolos concrete units have been used extensively throughout the world for the protection of shorelines and rubble structures. A three-dimensional finite element model is used to determine the states of dynamic stress in dolosse with varying dimensions and concrete properties. An analytical procedure is developed which accurately predicts the tensile stress in the shank and horizontal fluke of dolosse subject to drop test loading conditions Numerical examples are presented which illustrate the application of prediction and iso-stress equations.     

Geochemistry of suspended matter from the Baltic Sea 2. Results of bulk trace metal analysis by AAS

In 1984, on a transect covering the whole Baltic Sea and parts of the adjacent North Sea, 160 water samples were taken and analysed for their concentrations of particulate and dissolved metals. In addition, the suspended materials were investigated for their elemental bulk composition.The particulate fractions represented from about 5% (Cd, Cu and Ni) to 50% (Fe and Pb) of the total (particulate plus dissolved) concentrations. For some elements (Ba, Cd, Cu, Pb and Zn), the particulate matter from the surface microlayer was enriched with respect to those suspended materials taken from 0.2 m depth. This could reflect the atmospheric input of metal-rich aerosols. In anoxic deep waters, maximum contents of Zn (6400 μg g⁻¹), Cu (1330 μg g⁻¹) and Cd (12 μg g⁻¹) were observed in the particulate matter, indicating sulphidic forms. On the other hand, under oxic conditions the distribution coefficients (K_d) decreased with the water depth (Cd, Fe and Pb).Relative to global background levels, the particulate matter contained metal “excesses” amounting to more than 90% of the total contents (Cd, Mn, Pb and Zn). Automated electron probe X-ray microanalysis (EPXMA) revealed that the elemental composition of sediments is mainly governed by post-depositional processes of early diagenesis and is only weakly related to the composition of suspended matter in the overlying water body. For instance, in relation to surface mud sediments of the central Baltic net-sedimentation basins, Zn, Cd, Cu and Mn had 30–100% higher levels in the suspended materials. The general pattern of metal contents of particulate matter taken from 10 m depth on a transect between the Bothnian Bay and the North Sea were—possibly as a result of anthropogenic inputs—rather similar for Pb, Zn and Cu. For Fe and Mn, the distribution patterns along the transect were probably governed by the natural loading characteristics and by the biogeochemistry of those elements.