Nature of the connection between the Northern and Southern Zechstein Basins across the Mid North Sea High

The seismic expression of a salt-filled channel which cuts across the Mid North Sea High in Quadrant 37 is described, with features interpreted as being produced by salt-edge dissolution forming both eastern and western margins of the channel. The apparent half-graben nature of the channel is shown to be only superficial, and due to complex faulting associated with, but not defining, its western margin. The shallower faulting here is a Mesozoic to early Tertiary growth fault related to local dissolution of Zechstein salt. The dissolution effect appears in turn to have been localized by the presence of a deeper fault that was already downthrown to the east in Zechstein times, when it seems to have limited the eastward progradation of Zechstein shelf carbonates and anhydrites, and had probably ceased to move significantly before the onset of the Late Cimmerian erosional phase. The origin of this arcuate fault is tentatively ascribed to subsidence around a granite batholith. Zechstein salt originally spread some distance to the east and west of the channel; it was dissolved from the edges inwards, mainly before the Late Cretaceous, giving rise to a thicker Mesozoic sequence on parts of the flanks of the channel than in the middle. Besides providing an interesting structural case history, the features described have implications regarding Zechstein sedimentation, reservoir potential, the tectonic history of the North Sea, and the nature of the Mid North Sea High itself.     

A note on wave action conservation in a dissipative current wave motion

We consider steady, slowly varying water waves propagating on a steady current over a gently sloping bed, so-called current depth refraction. All expressions are correct to second order in wave amplitude. Formulating the energy equation for the fluctuating motion in terms of wave action (wave energy divided by intrinsic angular frequency) results in an expression, where the dissipative term is strikingly similar to wave action itself. It is simply the ‘extra’ dissipation (per unit area) caused by the fluctuating motion (i.e. total dissipation minus the effect of current acting on total mean bed shear stress) divided by the intrinsic angular frequency. We call it ‘wave action dissipation’. An inconsistency in Phillips' (1977) book is pointed out. A new formula for the calculation of wave amplitudes along rays is set forth.     

Pop-up bottom seismic recorder (PUBS) of the Institute of Oceanographic Sciences,U.K.

A pop-up bottom seismic recorder designed for seismic refraction experiments was built by the Institute of Oceanographic Sciences in 1968. The device is housed within a 71 cm diameter sphere weighing 270 kg when launched. signals picked up by a hydrophone are recorded in analogue form on magnetic tape in the band 2–100 Hz. The total continuous recording period is 12 hr but the lifetime of the system can be effectively extended by cycling the tape-recorders to allow shooting to go on for up to 3 days. Ballast release is by acoustic command or by pre-set clock. The instruments have been used in water depths from 150 to 4820 m making a total of 63 deployments with a 95% recovery rate. A new version with three-component geophones is being built.     

Spatial variation of the intertidal sediments and macrozoo-benthic assemblages along Eighty-mile Beach, North-western Australia

The extensive intertidal flats along Eighty-mile Beach in North-western Australia appear to be monotonous and homogeneous and seem ideally suited to study tidal zonation in macrozoo-benthic communities and their possible correlates with characteristics of the sediment. In October 1999, we sampled benthic invertebrates and sediments at a total of 895 sampling stations distributed over six different locations, each location separated by 15 km of unsampled foreshore along Eighty-mile Beach. To test for the presence or absence of patterns of tidal zonation (distinct height-related zones of specific sediment grain sizes or zoobenthic taxonomic groups) or patchiness (distinct patches of specific sediment grain sizes or zoobenthic taxonomic groups not related to tidal height) each location was divided into three along-shore sections and each section (transect) was examined at two or three tidal heights. Zonation was observed for sediment grain sizes. Sediments were coarser at the highest intertidal level and finer towards the low water line. Benthic assemblages also differed among tidal heights, but in terms of species-composition the differences were not consistent among the locations. Each location supported a unique collection of benthic invertebrates. Therefore the hypothesis of the presence of distinct zones of specific species or zoobenthic taxonomic groups was rejected; the presence of benthic patches was confirmed. The distribution of sediments and the composition of benthic assemblages were surprisingly poorly correlated compared to those reported in 12 previous quantitative studies around the world. One possible explanation might be that super-cyclone Vance, which hit the study-area only six months before this study, contributed to this poor correlation. Alternatively, the poor correlation may indicate that biotic interactions are more important than the assumed abiotic structuring.     

Computational study of sail performance in upwind condition

Airflow around yacht sails with imposed final geometry is simulated using a CFD code, reproducing experimental tests carried in a wind tunnel. Two configurations are considered: one, mast–main sail and the other, mast–jib–main sail. Both configurations were studied in the same flow conditions of air velocity and incidence angle. The grid is structured-like next to the sails and unstructured in the rest of the domain. The turbulence model used is Shear Stress Transport. The results are compared against experimental and numerical results.     

On the adequacy of second-order models to predict abnormal waves

The paper is intended to extend the investigations about the nature of abnormal waves that have been reported in the work of Guedes Soares et al. (Characteristics of abnormal waves in North Sea states. Applied Ocean Research 25, [337–344]). The same dataset gathered at the oil platform North Alwyn in the North Sea during the November storm in 1997 is used along with the time series from the Draupner platform, in which an abnormal wave occurred. The data are reanalyzed from the viewpoint of the applicability of second-order models to fit large waves. The observed results confirm that the second-order approximation is not adequate to describe highly asymmetric and abnormal waves.     

Nutrient dynamics and seasonal succession of phytoplankton assemblages in a Southern European Estuary: Ria de Aveiro, Portugal

The spatial and temporal dynamics of dissolved inorganic nitrogen, dissolved phosphate, dissolved silica and chlorophyll a were measured seasonally at eight stations in the Ria de Aveiro. Between December 2000 and September 2001, the seasonal succession of phytoplankton assemblages, inferred after the spatial and seasonal variation of silica and of chlorophyll a concentrations, showed that diatoms (μmol Si L⁻¹) dominated from late autumn until early spring, while chlorophytes (μg Chl a L⁻¹) bloomed during late spring and summer. The Si:N:P ratios and Si concentrations indicated no seasonal depletion in dissolved silica, as in other temperate systems, possibly because of abnormal precipitation and flood events prolonging the supply of dissolved Si to the system. The Si:N:P ratios suggested P limitation at the system level. Despite the relative proportions of available nutrients, the mean phosphorus concentration (5.3 μmol L⁻¹) was above the reported half-saturation constants for P uptake by phytoplankton. Thus, in Ria de Aveiro, the seasonal succession of phytoplankton assemblages may also be dependent on the grazing capacity of the pelagic community through top-down regulation.     

Tidal fluxes of nutrients and suspended sediments at the North Inlet–Winyah Bay National Estuarine Research Reserve

Beginning June of 1993 suites of 13 water samples have been collected at Oyster Landing, North Inlet (SC), every 20 days covering two consecutive tidal cycles at 2.07 h intervals. In order to ascertain whether this large (and still growing) water chemistry data set can be used to determine tidal fluxes of nutrients and sediments, we coupled measured concentrations to estimates of instantaneous tidal discharge based on a basin water storage curve and hindcast tides. The mean advective fluxes of all constituents, including salt, showed statistically significant exports. This result, however, is largely due to an ebb bias in the sampling protocol, which resulted in 52% of the samples being collected on ebb tide versus a theoretical percentage of 48%. When this bias was corrected by reducing the mean discharge (−610 l s⁻¹) to a value (−125 l s⁻¹) that produced a balance between the mean advective and dispersive salt fluxes, the advective fluxes of the other constituents were reduced to values that are not significantly different from zero. In addition to a statistically significant dispersive influx of salt, significant dispersive exports were found for DON, NH₄, DOP, PO₄ and DOC. All particulate constituents (PN, PP, ISS and OSS) yielded dispersive fluxes that were not significantly different from zero. Annual material budgets for the Oyster Landing basin based on the dispersive fluxes of all constituents (except salt) are generally similar in magnitude and direction to those measured by [Dame, R.F., Spurrier, J.D., Williams, T.M., Kjerfve, B., Zingmark, R.G., Wolaver, T.G., Chrzanowski, T.H., McKeller, H.N., Vernberg, F.J., 1991. Annual material processing by a salt marsh-estuarine basin in South Carolina, USA. Marine Ecology Progress Series 72, 153–166.] in the nearby and ecologically similar Bly Creek basin, indicating that the dispersive fluxes determined in this study are realistic. We offer suggestions for improving the reliability and usefulness of future Oyster Landing water quality data.     

Isotopic and Elemental Variations of Carbon and Nitrogen in a Mangrove Estuary

Variations in elemental and isotopic ratios of suspended particulate matter (SPM) were investigated in the Guayas River Estuary Ecosystem (GREE) that empties into the Gulf of Guayaquil, Ecuador. Detritus in the system was identified on the basis of extremely high carbon:chlorophyll aratios (>1000). This material had mean δ¹³C of −26·4±0·3, δ¹⁵N of +4·8±0·2, and (C:N)_atomicof 14·1±0·9. The isotopic data were comparable to measurements reported for fresh and degrading mangrove leaves, whereas the elemental ratio was comparatively enriched in nitrogen. Isotope measurements of SPM throughout the GREE were more similar to values for riverine material and detritus compared with that for the coastal end-member. Values indicative ofin situproduced algae, sewage and shrimp pond effluent were only found at selected sites. Bacterial bioassays, which were used to document potential sources of dissolved organic matter in the GREE, were isotopically similar to SPM. This correspondence coupled with the relatively low (C:N)_aof SPM could be explained by bacterial immobolization of nitrogen onto detritus. Finally, tidal variations of (C:N)_aand δ¹³C at a brackish mangrove site were similar in magnitude to spatial variations encountered throughout the GREE. Based on these results, the authors caution that care must be taken when samples are taken for food-web studies in these systems.     

The impact of wave loads and pore-water pressure generation on initiation of sediment transport

The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported.