Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Viscous model of plate tectonics for the Black Sea region (in relation to the problem of the late Cenozoic evolution of the Black Sea basins)

A numerical model of the Black Sea region (Northeastern Mediterranean) is presented in which it is regarded as a part of the mosaic plate ensemble consisting of the fixed East European platform; the active Arabian, Adriatic, and Pannonian plates; and passive East and West Black Sea and Mysian microplates, which are embedded in a plastically deformable regional orogenic matrix. The fields of displacements, stresses, and deformations in the region are calculated by means of the finite element method within the framework of a linear-viscous rheology approach to a system with nonhomogeneous viscosities. The velocity field obtained is in good agreement with published data of direct observations of plate displacements in the region. In the pressure field, areas of low pressure and decompression are established in the western part of Black Sea and in the south of the Mysian microplate. The poles of rotation of the East and West Black Sea microplates and of the Mysian microplate are computed. For the latter two microplates, significant rotational components are suggested. The East Black Sea microplate acts mostly as indenter, which transmits the collisional motion from the Arabian plate to the southern edge of the East European platform including the Crimea. According to the geodynamical model, the rates of the Cenozoic sedimentation in the Black Sea depression at the collision stage (Oligocene-Pliocene) result from the greater compression of the East Black Sea microplate as compared to the West Black Sea microplate, which, probably, experienced a kind of extension.     

Mutual Impact of Mineral and Organic Components in Atmospheric Aerosol

Izvestiya, Atmospheric and Oceanic Physics - The effect of ammonium sulfate ((NH4)2SO4) on the condensation of low-volatile organic compounds in atmospheric aerosol is considered. Using the UNIFAC...     

Applying an Integrated System for Ground to Space Monitoring of Anthropogenic Impacts on Coastal Waters of the Black Sea

Izvestiya, Atmospheric and Oceanic Physics - The authors describe features and the operation of an integrated ground to space monitoring system for studying anthropogenic effects on coastal waters...     

In-vitro metabolism of benzo[a]pyrene and benzo[a]pyrene-7,8-dihydrodiol by liver and intestinal mucosa homogenates from the winter flounder (Pseudopleuronectes americanus)

Freshly prepared homogenates were used to assess the relative ability of winter flounder (Pseudopleuronectes americanus) liver and intestinal mucosal cells to metabolize the polycyclic aromatic hydrocarbon (PAH) benzo[a]pyrene (BaP) and its proximate carcinogenic metabolite, BaP-7,8-dihydrodiol (7,8-Diol). Data obtained from homogenates prepared from fish previously fed β-naphthoflavone (BNF) indicated that both tissues had similar abilities to metabolize either BaP or 7,8-Diol on a per gram of protein basis. Metabolite profiles produced indicate that water-soluble metabolite formation is favored at low doses. These findings support the hypothesis that the intestine plays an important role in first-pass metabolism of dietary carcinogens in the winter flounder.     

The Ah receptor in marine animals: phylogenetic distribution and relationship to cytochrome P4501A inducibility

In mammals, the induction of cytochrome P4501A forms by chlorinated dibenzo-p-dioxins, chlorinated dibenzofurans, and halogenated biphenyls is under control of a soluble protein known as the Ah (aromatic hydrocarbon) receptor. Little is known about the presence and properties of the Ah receptor in other vertebrate and invertebrate species. In these studies, we sought evidence for an Ah receptor in the liver or liver-equivalent of 20 species of marine and freshwater animals, using the photoaffinity ligand 2-azido-3-[¹²⁵I] iodo-7,8-dibromodibenzo-p-dioxin (N₃[¹²⁵I]Br₂DD). Specific labeling of cytosolic proteins by N₃[¹²⁵I]Br₂DD was observed in seven species of teleost and elasmobranch fish, in PLHC-I fish hepatoma cells, and in beluga whales. No specifically labeled proteins were found in cytosol from two species of agnathan fish nor in any of nine invertebrate species representing eight classes of four phyla. The presence or absence of specifically labeled polypeptides corresponds with the inducibility of cytochrome P4501A and sensitivity to the toxic effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin and related planar halogenated aromatic hydrocarbons in many of these groups. Thus, Ah receptor function may have arisen early invertebrate evolution and has been conserved from elasmobranch and teleost fish to mammals.     

Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.     

Simultaneous exposure of English sole (Parophrys vetulus) to sediment-associated xenobiotics: Part 1—uptake and disposition of 14C-polychlorinated biphenyls and 3H-benzo[a]pyrene

English sole (Parophrys vetulus) were exposed to environmentally realistic levels of sediment-associated ³H-benzo[a]pyrene (3 μg BaP/g sediment, dry weight) and ¹⁴C-Aroclor 1254 (1 μg PCBs/g), separately and together, for up to 10 days. BaP and its metabolites in tissues reached steady-state concentrations by the first day of the exposure, whereas PCBs did not approach steady-state concentrations until the tenth day of exposure. Simultaneous exposure of sole to BaP and PCBs, relative to separate exposure to the xenobiotics, significantly increased the concentrations of BaP-derived radioactivity and decreased the concentrations of PCB-derived radioactivity in some tissues and bile. Accumulation of PCB-derived radioactivity, estimated as the burden in tissues, was significantly greater (4- to 13-fold) than that of BaP-derived radioactivity throughout the experiments and regardless of the type of exposure. The rank of the concentrations of PCB-derived radioactivity in tissues and bile was: bile ～ liver > brain > kidney ～ gill > skin ～ blood ～ muscle and for BaP-derived radioactivity the order was: bile > liver > gill > kidney > skin ～ blood > muscle > brain. BaP-derived radioactivity in liver and bile was present primary (85–99%) as metabolites, whereas PCB-derived radioactivity was present equally as parent compounds and metabolites in bile and primarily (98 %) as parent compounds in liver. Hydrolysis of bile from PCB/BaP-exposed sole with β-glucuronidase/arylsulfatase released 35 % of the BaP-derived radioactivity and 32 % of the PCB-derived radioactivity as primary metabolites. A much higher proportion of the BaP-derived radioactivity (64 %) than the PCB-derived radioactivity (13 %) in bile was unaffected by the enzyme treatment, indicating differences in the conjugation of the primary metabolites of PCBs and BaP. The results suggest that in contaminated environments the tissue to sediment concentration ratios for PCBs would exceed that for BaP and its metabolites; however, BaP would be continually absorbed and metabolized by sole to potentially carcinogenic and mutagenic compounds. In addition, the tissue levels of these toxic compounds may be increased by simultaneous exposure to PCBs.