Wave diffraction and near-trapping by a multi-column gravity-based structure

This paper is concerned with the diffraction of water waves by offshore structures, with the ultimate aim of proposing tools for guiding airgap design. The diffraction of monochromatic waves by an array of four bottom mounted cylinders and a gravity-based structure is studied in detail using linear and second order theory. The phenomenon of near-trapping is investigated, allowing guidelines for airgap design to be established. When contemplating airgap design, however, it is crucially important that consideration is given to the largest waves in a sea state. Therefore, in this study a design wave, called NewWave, is proposed as a realistic model for large ocean waves and is used as the incident wave field in the wave-structure diffraction analysis.     

The circulation of the Indian Ocean at 32°S

Using inverse methods a circulation for a new section along 32°S in the Indian Ocean is derived with a maximum in the overturning stream function (or deep overturning) of 10.3 Sv at 3310 m. Shipboard and Lowered Acoustic Doppler Current Profiler (ADCP) data are used to inform the choice of reference level velocity for the initial geostrophic field. Our preferred solution includes a silicate constraint (−312 ± 380 kmol s⁻¹) consistent with an Indonesian throughflow of 12 Sv. The overturning changes from 12.3 Sv at 3270 m when the silicate constraint is omitted to 10.3 Sv when it is included. The deep overturning varies by only ±0.7 Sv as the silicate constraint varies from +68 to −692 kmol s⁻¹, and by ±0.3 Sv as the net flux across the section, driven by the Indonesian throughflow, varies from −7 to −17 Sv with an appropriately scaled silicate flux constraint. Thus, the overturning is insensitive to the size of the Indonesian throughflow and silicate constraint within their apriori uncertainties. We find that the use of the ADCP data adds significant detail to the horizontal circulation. These resolved circulations include the Agulhas Undercurrent, deep cyclonic gyres and deep fronts, features evidenced by long term integrators of the flow such as current meter and float measurements as well as water properties.     

Trophic modeling of the Northern Humboldt Current Ecosystem, Part II: Elucidating ecosystem dynamics from 1995 to 2004 with a focus on the impact of ENSO

The Northern Humboldt Current Ecosystem is one of the most productive in the world in terms of fish production. Its location near to the equator permits strong upwelling under relatively low winds, thus creating optimal conditions for the development of plankton communities. These communities ultimately support abundant populations of grazing fish such as the Peruvian anchoveta, Engraulis ringens. The ecosystem is also subject to strong inter-annual environmental variability associated with the El Niño Southern Oscillation (ENSO), which has major effects on nutrient structure, primary production, and higher trophic levels. Here our objective is to model the contributions of several external drivers (i.e. reconstructed phytoplankton changes, fish immigration, and fishing rate) and internal control mechanisms (i.e. predator-prey) to ecosystem dynamics over an ENSO cycle. Steady-state models and time-series data from the Instituto del Mar del Perú (IMARPE) from 1995 to 2004 provide the base data for simulations conducted with the program Ecopath with Ecosim. In simulations all three external drivers contribute to ecosystem dynamics. Changes in phytoplankton quantity and composition (i.e. contribution of diatoms and dino- and silicoflagellates), as affected by upwelling intensity, were important in dynamics of the El Niño of 1997–98 and the subsequent 3 years. The expansion and immigration of mesopelagic fish populations during El Niño was important for dynamics in following years. Fishing rate changes were the most important of the three external drivers tested, helping to explain observed dynamics throughout the modeled period, and particularly during the post-El Niño period. Internal control settings show a mix of predator–prey control settings; however a “wasp-waist” control of the ecosystem by small pelagic fish is not supported.     

Modelling population retention in Australia’s Northern Territory – how do current forms of migration contribute to population turnover and retention?

ABSTRACT

In the past, population growth in Australia's Northern Territory, as in other peripheral parts of high-income countries, has been driven by internal labour migration and migration from outside of Australia. These have been contributing to the high population turnover experienced in peripheral areas. Since 2010, the Northern Territory has experienced low (and even negative) population growth, and public policy is currently focused on migration as a lever to reverse this trend. However, the extent to which the characteristics of migrants influence the potential for longer-term population growth is poorly understood. This paper uses a new method to analyse the contributions of various types of migrants to both population turnover and retention. Two major sets of findings emerge: First, the significance of separating newer in-migrants from longer-term residents when analysing migration patterns; and secondly, the contribution of age, gender, Indigenous status, international origin, wages and industry of employment to the Northern Territory's population turnover. The research suggests that current forms of migration favour people who are likely to stay for only short periods, and have high wage demands. The main policy inference is that long-term population growth will likely not eventuate unless new forms of migration can be stimulated.     

Time to talk knowledge

As part of the secondary school qualification repackaging, the Ministry of Education has requested the geography education community define what constitutes their “critical body of knowledge.” In this article, I discuss three knowledge‐oriented themes focused on: (a) recent assessment trends in geography; (b) the predictive value of NCEA Level 3 geography with 100‐level success and (c) the nature of knowledge as expressed by the New Zealand Curriculum and assessment. Taken together, these themes suggest a need for a serious conversation about knowledge in school geography, as a pre‐cursor to the re‐design of the geography standards matrix.     

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.     

A GIS data model for public gardens

An enterprise GIS data model was developed for use in public gardens, which includes botanical gardens, arboreta, and zoos. The data model defines the representation of geographical phenomena, the attributes of each feature, and the relationships between them in order to support information management and analysis within public gardens. The data model was developed using a three‐stage process consisting of conceptual, logical, and physical design, each guided by stakeholder workshops and software testing. The data model includes the attributes of features necessary to create collection maps and perform collection analysis, and is designed to link to existing plant and animal records management systems (BG‐BASE and ZIMS) through a common key. The Public Garden Data Model consists of three modules (Base Map, Facilities and Infrastructure, and Basic Plant Records), unified into one comprehensive spatial data model for public gardens, and contains 59 feature classes and tables connected by 49 relationship classes.     

Measuring impact crater depth throughout the solar system

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data-gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.     

Revised recommended methods for analyzing crater size-frequency distributions

Impact crater populations help us to understand solar system dynamics, planetary surface histories, and surface modification processes. A single previous effort to standardize how crater data are displayed in graphs, tables, and archives was in a 1978 NASA report by the Crater Analysis Techniques Working Group, published in 1979 in Icarus. The report had a significant lasting effect, but later decades brought major advances in statistical and computer sciences while the crater field has remained fairly stagnant. In this new work, we revisit the fundamental techniques for displaying and analyzing crater population data and demonstrate better statistical methods that can be used. Specifically, we address (1) how crater size-frequency distributions (SFDs) are constructed, (2) how error bars are assigned to SFDs, and (3) how SFDs are fit to power-laws and other models. We show how the new methods yield results similar to those of previous techniques in that the SFDs have familiar shapes but better account for multiple sources of uncertainty. We also recommend graphic, display, and archiving methods that reflect computers’ capabilities and fulfill NASA's current requirements for Data Management Plans.     

A time-space model for the distribution of shoreline archaeological sites in the lake superior basin

Archaeological site interpretation can be enhanced by consideration of related geological and geomorphological processes. Lake Superior has a history of glaciation, isostatic recovery, and water-level change. Two examples are given of shoreline sites at which interpretation is enhanced by an understanding of local geologic factors. The archaeologic history of the Lake Superior basin is reviewed, and three cultural traditions are recognized; (1) Paleoindian, (2) Archaic, and (3) Woodland. Three significant factors of geologic history are then discussed: (1) ice margin oscillation, (2) differential isostatic uplift, and (3) lake-level fluctuations. The factors reducing or improving shoreline archaeological site preservation are examined, and a summary model of shoreline site distribution for the Lake Superior basin is offered. It is concluded that the north shore provides the best potential for a complete archaeological record. © 1993 John Wiley & Sons, Inc.