A time-space model for the distribution of shoreline archaeological sites in the lake superior basin

Archaeological site interpretation can be enhanced by consideration of related geological and geomorphological processes. Lake Superior has a history of glaciation, isostatic recovery, and water-level change. Two examples are given of shoreline sites at which interpretation is enhanced by an understanding of local geologic factors. The archaeologic history of the Lake Superior basin is reviewed, and three cultural traditions are recognized; (1) Paleoindian, (2) Archaic, and (3) Woodland. Three significant factors of geologic history are then discussed: (1) ice margin oscillation, (2) differential isostatic uplift, and (3) lake-level fluctuations. The factors reducing or improving shoreline archaeological site preservation are examined, and a summary model of shoreline site distribution for the Lake Superior basin is offered. It is concluded that the north shore provides the best potential for a complete archaeological record. © 1993 John Wiley & Sons, Inc.     

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.     

A GIS data model for public gardens

An enterprise GIS data model was developed for use in public gardens, which includes botanical gardens, arboreta, and zoos. The data model defines the representation of geographical phenomena, the attributes of each feature, and the relationships between them in order to support information management and analysis within public gardens. The data model was developed using a three‐stage process consisting of conceptual, logical, and physical design, each guided by stakeholder workshops and software testing. The data model includes the attributes of features necessary to create collection maps and perform collection analysis, and is designed to link to existing plant and animal records management systems (BG‐BASE and ZIMS) through a common key. The Public Garden Data Model consists of three modules (Base Map, Facilities and Infrastructure, and Basic Plant Records), unified into one comprehensive spatial data model for public gardens, and contains 59 feature classes and tables connected by 49 relationship classes.     

The circulation of the Indian Ocean at 32°S

Using inverse methods a circulation for a new section along 32°S in the Indian Ocean is derived with a maximum in the overturning stream function (or deep overturning) of 10.3 Sv at 3310 m. Shipboard and Lowered Acoustic Doppler Current Profiler (ADCP) data are used to inform the choice of reference level velocity for the initial geostrophic field. Our preferred solution includes a silicate constraint (−312 ± 380 kmol s⁻¹) consistent with an Indonesian throughflow of 12 Sv. The overturning changes from 12.3 Sv at 3270 m when the silicate constraint is omitted to 10.3 Sv when it is included. The deep overturning varies by only ±0.7 Sv as the silicate constraint varies from +68 to −692 kmol s⁻¹, and by ±0.3 Sv as the net flux across the section, driven by the Indonesian throughflow, varies from −7 to −17 Sv with an appropriately scaled silicate flux constraint. Thus, the overturning is insensitive to the size of the Indonesian throughflow and silicate constraint within their apriori uncertainties. We find that the use of the ADCP data adds significant detail to the horizontal circulation. These resolved circulations include the Agulhas Undercurrent, deep cyclonic gyres and deep fronts, features evidenced by long term integrators of the flow such as current meter and float measurements as well as water properties.     

Unsteady hydromechanics of a steering podded propeller unit

Unsteady forces, torques and bending moments were predicted for a model podded propulsor unit at various azimuth angles. Predictions in time history include propeller shaft thrust, propulsor unit thrust, normal forces to the propeller shaft bearing, total forces acting on the propulsor unit, propeller shaft torque, blade spindle torque, in-plane and out-of-plane bending moments, and propulsor unit stock shaft torque and bending moments. Analysis was performed for averaged forces and their fluctuations as well. A time-domain unsteady multi-body panel method code, PROPELLA, was further developed for this prediction work. Predictions were compared with a set of time averaged in-house experimental data for a puller-type podded propulsor configuration in the first quadrant operation. Unsteady fluctuations of forces were predicted numerically. Analysis was made for the bending moment on propeller blades, shaft and the propulsor unit stock shaft for azimuth angles from 0° to 45°. It indicates that the magnitude and fluctuation of the forces are significant and they are essential for structural strength and design optimization. The predicted bending moment and global forces on the propulsor unit provide some useful data for ship maneuvering motion and simulation in off-design conditions.     

Measuring impact crater depth throughout the solar system

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data-gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.     

Revised recommended methods for analyzing crater size-frequency distributions

Impact crater populations help us to understand solar system dynamics, planetary surface histories, and surface modification processes. A single previous effort to standardize how crater data are displayed in graphs, tables, and archives was in a 1978 NASA report by the Crater Analysis Techniques Working Group, published in 1979 in Icarus. The report had a significant lasting effect, but later decades brought major advances in statistical and computer sciences while the crater field has remained fairly stagnant. In this new work, we revisit the fundamental techniques for displaying and analyzing crater population data and demonstrate better statistical methods that can be used. Specifically, we address (1) how crater size-frequency distributions (SFDs) are constructed, (2) how error bars are assigned to SFDs, and (3) how SFDs are fit to power-laws and other models. We show how the new methods yield results similar to those of previous techniques in that the SFDs have familiar shapes but better account for multiple sources of uncertainty. We also recommend graphic, display, and archiving methods that reflect computers’ capabilities and fulfill NASA's current requirements for Data Management Plans.     

Hypervelocity impacts into ice‐topped layered targets: Investigating the effects of ice crust thickness and subsurface density on crater morphology

Many bodies in the outer solar system are theorized to have an ice shell with a different subsurface material below, be it chondritic, regolith, or a subsurface ocean. This layering can have a significant influence on the morphology of impact craters. Accordingly, we have undertaken laboratory hypervelocity impact experiments on a range of multilayered targets, with interiors of water, sand, and basalt. Impact experiments were undertaken using impact speeds in the range of 0.8–5.3 km s^?1, a 1.5 mm Al ball bearing projectile, and an impact incidence of 45°. The surface ice crust had a thickness between 5 and 50 mm, i.e., some 3–30 times the projectile diameter. The thickness of the ice crust as well as the nature of the subsurface layer (liquid, well consolidated, etc.) have a marked effect on the morphology of the resulting impact crater, with thicker ice producing a larger crater diameter (at a given impact velocity), and the crater diameter scaling with impact speed to the power 0.72 for semi‐infinite ice, but with 0.37 for thin ice. The density of the subsurface material changes the structure of the crater, with flat crater floors if there is a dense, well‐consolidated subsurface layer (basalt) or steep, narrow craters if there is a less cohesive subsurface (sand). The associated faulting in the ice surface is also dependent on ice thickness and the substrate material. We find that the ice layer (in impacts at 5 km s^?1) is effectively semi‐infinite if its thickness is more than 15.5 times the projectile diameter. Below this, the crater diameter is reduced by 4% for each reduction in ice layer thickness equal to the impactor diameter. Crater depth is also affected. In the ice thickness region, 7–15.5 times the projectile diameter, the crater shape in the ice is modified even when the subsurface layer is not penetrated. For ice thicknesses, <7 times the projectile diameter, the ice layer is breached, but the nature of the resulting crater depends heavily on the subsurface material. If the subsurface is noncohesive (loose) material, a crater forms in it. If it is dense, well‐consolidated basalt, no crater forms in the exposed subsurface layer.