Geotechnical properties of deep oceanic sediments recovered from the hydrate occurrence regions in the Ulleung Basin, East Sea, offshore Korea

This study presents comprehensive geotechnical data of the natural marine sediments cored from the hydrate occurrence regions during the Ulleung Basin Gas Hydrate Expedition 1 (UBGH1), East Sea, offshore Korea in 2007. Geotechnical soil index properties of the Ulleung Basin sediments, including grain size distribution, porosity, water content, Atterberg limits, specific gravity, and specific surface area, were experimentally determined. These soil index properties were correlated to geotechnical engineering parameters (e.g., shear strength and friction angle) by using well-known empirical relationships. By performing standard consolidation tests on both undisturbed specimens (as recovered from the original core liner after hydrate dissociation) and remolded specimens, stress-dependent mechanical and hydraulic properties (e.g., compressibility and hydraulic conductivity) were measured. The experimental results provide important engineering parameters, and demonstrate the effect of hydrate presence and consequential dissociation to index properties, engineering parameters, and innate sediment structures.     

Dissolved organic phosphorus utilization and alkaline phosphatase activity of the dinoflagellate <Emphasis Type="Italic">Gymnodinium impudicum</Emphasis> isolated from the South Sea of Korea

This study investigated alkaline phosphatase (APase) activity and dissolved organic and inorganic phosphorus utilization by the harmful dinoflagellate Gymnodinium impudicum (Fraga et Bravo) Hansen et Moestrup isolated from the South Sea of Korea. Under conditions of limited phosphorus, observation of growth kinetics in batch culture yielded a maximum growth rate (μ_max) of 0.41 /day and a half saturation constant (Ks) of 0.71 μM. In time-course experiments, APase was induced as dissolved inorganic phosphorus (DIP) concentrations fell below 0.83 μM, a threshold near the estimated Ks; APase activity increased with further DIP depletion to a maximum of 0.70 pmol/cell/h in the senescent phase. Thus, Ks may be an important index of the threshold DIP concentration for APase induction. G. impudicum utilizes a wide variety of dissolved organic phosphorus compounds in addition to DIP. These results suggest that DIP limitation in the Southern Sea of Korea may have led to the spread of G. impudicum along with the harmful dinoflagellate Cochlodinium polykrikoides in recent years.     

Development of the AUV ‘ISiMI’ and a free running test in an Ocean Engineering Basin

The Korea Ocean Research and Development Institute (KORDI) has developed a small AUV named ISiMI. The mission of ISiMI is to work as a test-bed AUV for the development and validation of various algorithms and instruments required to enhance the AUV's functions. The design concept of ISiMI is that of a vehicle small enough to cruise the Ocean Engineering Basin (OEB) of KORDI and to be handled by one or two people. The downsized design and the cruising ability in its tank enable fast experimental feedback on AUV technologies and a shorter development period for new technologies. This paper presents a review of our research work on the development of ISiMI, with a performance evaluation by simulation and an experimental test. After the design and implementation of ISiMI, including its positioning system in the OEB, are presented, a series of test results in the OEB and discussions of the results are presented, with comparisons of the simulation and experimental outputs.     

Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: Part I—Unstiffened plates

The present paper is Part I of a series of three papers prepared by the authors on the methods useful for ultimate limit state assessment of marine structures, that have been developed in the literature during the last few decades. It is considered that such methods are now mature enough to enter day-by-day design and strength assessment practice. The aims of the three papers are to conduct some benchmark studies of such methods on ultimate limit state assessment of (unstiffened) plates, stiffened panels, and hull girders of ships and ship-shaped offshore structures, using some candidate methods such as ANSYS nonlinear finite element analysis (FEA), DNV PULS, ALPS/ULSAP, ALPS/HULL, and IACS common structural rules (CSR) methods. As an illustrative example, an AFRAMAX-class hypothetical double hull oil tanker structure designed by CSR method is studied. In the present paper (Part I), the ultimate limit state assessment of unstiffened plates under combined biaxial compression and lateral pressure loads is emphasized using ANSYS, DNV PULS, and ALPS/ULSAP methods, and their resulting computations are compared. Part II will deal with methods for the ultimate limit state assessment of stiffened panels under combined biaxial compression and lateral pressure using ANSYS, DNV PULS, and ALPS/ULSAP methods, and Part III will treat methods for the progressive collapse analysis of the hull structure using ANSYS, ALPS/HULL, and IACS CSR methods.     

M2 Tidal Current Estimation from One-day Observation Data off the Western and Southern Coasts of Korea

Ocean Science Journal - A practical method to estimate the M2 tidal current is proposed based on one-day current observations. In this method, the semi-diurnal constituent, composed of several...     

Fusion of multispectral and panchromatic Satellite images using the curvelet transform

A useful technique in various applications of remote sensing involves the fusion of different types of satellite images, namely multispectral (MS) satellite images with a high spectral and low spatial resolution and panchromatic (Pan) satellite image with a low spectral and high spatial resolution. Recent studies show that wavelet-based image fusion provides high-quality spectral content in fused images. However, the results of most wavelet-based methods of image fusion have a spatial resolution that is less than that obtained via the Brovey, intensity-hue-saturation, and principal components analysis methods of image fusion. We introduce an improved method of image fusion which is based on the amelioration de la resolution spatiale par injection de structures (ARSIS) concept using the curvelet transform, because the curvelet transform represents edges better than wavelets. Because edges are fundamental in image representation, enhancing the edges is an effective means of enhancing spatial resolution. Curvelet-based image fusion has been used to merge a Landsat Enhanced Thematic Mapper Plus Pan and MS image. The proposed method simultaneously provides richer information in the spatial and spectral domains.     

Geochemical and Sr–Nd–Pb isotopic investigation of Triassic granitoids and basement rocks in the northern Gyeongsang Basin, Korea: Implications for the young basement in the East Asian continental margin

Abstract We present chemical and Sr–Nd–Pb isotopic compositions of three Triassic (226–241 Ma) calc‐alkaline granitoids (the Yeongdeok granite, Yeonghae diorite and Cheongsong granodiorite) and basement rocks in the northern Gyeongsang basin, south‐eastern Korea. These plutons exhibit typical geochemical characteristics of I‐type granitoids generated in a continental magmatic arc. The Yeongdeok and Yeonghae plutons have similar initial Sr, Nd and Pb isotope ratios (⁸⁷Sr/⁸⁶Sr_initial = 0.7041 ~ 0.7050, ?_Nd(t) = 2.3 ~ 4.0, ²⁰⁶Pb/²⁰⁴Pb_feldspar = 18.22 ~ 18.34), but distinct rare earth element patterns, suggesting that the two plutons formed from partial melting of a similar source material at different depths. The Cheongsong pluton has slightly more enriched Sr–Nd–Pb isotopic compositions (⁸⁷Sr/⁸⁶Sr_initial = 0.7047 ~ 0.7065, ?_Nd(t) = 3.9 ~ 2.8, ²⁰⁶Pb/²⁰⁴Pb_feldspar = 18.24 ~ 18.37) than the other two plutons. The Nd model ages of the basement rocks (1.1 ~ 1.4 Ga) are slightly older than those of the plutons (0.6 ~ 1.0 Ga). The initial Sr and Nd isotopic ratios of the plutons can be modeled by the mixing between the mid‐oceanic ridge basalt‐like depleted mantle component and the crustal component represented by basement rocks, which is also supported by Pb isotope data. The Sr and Nd isotope data from granitoids and basement rocks suggest that the Gyeongsang basin, the Hida belt and the inner zone of south‐western Japan share relatively young basement histories (middle Proterozoic), compared with those (early Proterozoic to Archean) of the Gyeonggi and Yeongnam massifs and the Okcheon belt. The Nd isotope data of basement rocks suggest that the Hida belt might be better correlated with the basement of the Gyeongsang basin than the Gyeonggi massif, the Okcheon belt or the Yeongnam massif, although it may represent an older continental margin of East Asia than the Gyeongsang basin considering its slightly older Nd model ages.     

Macrobenthos habitat mapping in a tidal flat using remotely sensed data and a GIS-based probabilistic model

This paper proposes and tests a method of producing macrofauna habitat potential maps based on a weights-of-evidence model (a probabilistic approach) for the Hwangdo tidal flat, Korea. Samples of macrobenthos were collected during field work, and we considered five mollusca species for habitat mapping. A weights-of-evidence model was used to calculate the relative weights of 10 control factors that affect the macrobenthos habitat. The control factors were compiled as a spatial database from remotely sensed data combined with GIS analysis. The relative weight of each factor was integrated as a species potential index (SPI), which produced habitat potential maps. The maps were compared with the surveyed habitat locations, revealing a strong correlation between the potential maps and species locations. The combination of a GIS-based weights-of-evidence model and remote sensing techniques is an effective method in determining areas of macrobenthos habitat potential in a tidal flat setting.     

Runoff characteristics of non-point pollutants caused by different land uses and a spatial overlay analysis with spatial distribution of industrial cluster: a case study of the Lake Sihwa watershed

To characterize a runoff pattern of non-point pollutants in relation with different land uses in a watershed, a monitoring activity and field measurements were carried out and data points were recorded during the rainfall events for 2 years. The study area includes industrial, urban, and rural sectors, which can represent a model case for the runoff study. Each sector was monitored with methodology and parameters including partial event mean concentration, first flush effect, mass first flush ratios, and correlation analysis. The Banwol Industrial Outfall No. 4 (4TG), an industrial area, showed a strong first flush effect, indicating that pollutants such as suspended solids, chemical oxygen demand, total nitrogen, and total phosphorus, were discharged at the early stage of a storm. An MFF₃₀ analysis of the runoff revealed a mean pollutant load was over 50 %. In the Ansan Stream, an urban area, a strong first flush effect did not appear; however, the concentrations of pollutants reached a peak some time later during a storm event. Then, the concentrations of pollutants quickly reduced. On the other hand, Jangjunbo and Munsan Stream, rural areas, did not exhibit the first flush effects, and when considering the value of MFF₃₀, 30 % or fewer pollutants on average were discharged at the initial stage of a storm. This means most of pollutants were streamed out at the later time of a storm event. The monitoring results found that the runoff characteristics of non-point pollutants in industrial, urban, and rural areas were distinctly different and site-specific. Therefore, each watershed management plan should be prepared to meet its own characteristics. Also, this kind of data can be an important base in designing and sizing a regional wastewater treatment facility to treat pollutants from a contaminated watershed.