Connections between whistlers and pulsation activity

Simultaneous whistler records of one station and geomagnetic pulsation (Pc3) records at three stations were compared. In a previous study correlation was found between occurrence and L value of propagation/excitation for the two phenomena. The recently investigated simultaneous records have shown that the correlation is better on longer time scales (days) than on shorter ones (minutes), but the L values of the propagation of whistlers/excitation of pulsations are correlated, i.e. if whistlers propagate in higher latitude ducts, pulsations have periods longer than in the case when whistlers propagate in lower latitude ducts.     

Estimation of SPOT P-mode point spread function and derivation of a deconvolution filter

The integrating effect of the point spread function of a satellite remote sensing system significantly affects the signature from a single cover class if the surrounding cover is dissimilar and also reduces the spatial resolution of the output data. Digital SPOT P-Mode data acquired over linear ground edge and impulse features were analysed to determined the SPOT system's line spread function. This was integrated to give the normalised point spread function, and then inverted to derive an equation to estimate the true ground response by deconvolution of the observed response. The paper describes the procedures used in determining the point spread function, and applies the result to a number of urban features. A significant improvement in the image quality resulted.     

Three-dimensional structure of flow at a confluence of river channels with discordant beds

This paper presents three-dimensional data of the mean and turbulent structure of flow collected at a natural confluence of rivers with discordant beds to (1) describe the three-dimensional flow field of a natural junction of channels; (2) assess the role of changes in bed morphology occurring during transport-effective events on the structure of flow at a confluence; and (3) examine how the three-dimensional structure of flow varies with changes in the ratio of momentum flux between the two confluent streams. Three-dimensional measurements of velocity were reconstructed from the measurements obtained with an array of four, two-component electromagnetic current meters. Six detailed velocity profiles were taken at five cross-sections in a wide range of flow conditions. The mean field of flow is characterised by (1) the acceleration of flow in the downstream portion of the post-confluence channel, but by lower velocities upstream in the mixing layer area; (2) a stagnation zone at the apex of the junction; (3) a zone of flow deviation, and strong fluid upwelling, close to the avalanche face and at the margin of the tributary mouth bar; and (4) reduced velocities over the depositional bar at the downstream junction corner. The position and extent of these zones vary with changes in the ratio of momentum flux. Very high intensity of turbulence (peaks up to 50%) and turbulent kinetic energy were observed in the mixing layer region. Distortion of the mixing layer, characteristic of flow where bed discordance is present between the two tributary channels, was evident from mean and turbulent flow data. This field study suggests that the effects of bed discordance on flow, sediment transport, and the resultant bed morphology must be incorporated into conceptual and numeric models of these sites of complex flow.     

The influence of flow discharge variations on the morphodynamics of a diffluence–confluence unit on a large river

Bifurcations are key geomorphological nodes in anabranching and braided fluvial channels, controlling local bed morphology, the routing of sediment and water, and ultimately defining the stability of their associated diffluence–confluence unit. Recently, numerical modelling of bifurcations has focused on the relationship between flow conditions and the partitioning of sediment between the bifurcate channels. Herein, we report on field observations spanning September 2013 to July 2014 of the three‐dimensional flow structure, bed morphological change and partitioning of both flow discharge and suspended sediment through a large diffluence–confluence unit on the Mekong River, Cambodia, across a range of flow stages (from 13 500 to 27 000 m³ s^?1). Analysis of discharge and sediment load throughout the diffluence–confluence unit reveals that during the highest flows (Q = 27 000 m³ s^?1), the downstream island complex is a net sink of sediment (losing 2600 ± 2000 kg s^?1 between the diffluence and confluence), whereas during the rising limb (Q = 19 500 m³ s^?1) and falling limb flows (Q = 13 500 m³ s^?1) the sediment balance is in quasi‐equilibrium. We show that the discharge asymmetry of the bifurcation varies with discharge and highlight that the influence of upstream curvature‐induced water surface slope and bed morphological change may be first‐order controls on bifurcation configuration. Comparison of our field data to existing bifurcation stability diagrams reveals that during lower (rising and falling limb) flow the bifurcation may be classified as unstable, yet transitions to a stable condition at high flows. However, over the long term (1959–2013) aerial imagery reveals the diffluence–confluence unit to be fairly stable. We propose, therefore, that the long‐term stability of the bifurcation, as well as the larger channel planform and morphology of the diffluence–confluence unit, may be controlled by the dominant sediment transport regime of the system. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Length scales and statistical characteristics of outer bank roughness for large elongate meander bends: The influence of bank material properties,floodplain vegetation and flow inundation

This article explores the length scales and statistical characteristics of form roughness along the outer banks of two elongate bends on a large meandering river through investigation of topographic variability of the bank face. The analysis also examines how roughness varies over the vertical height of the banks and when the banks are exposed subaerially and inundated during flood stage. Detailed data on the topography of the outer banks were obtained subaerially using terrestrial LiDAR during low flow conditions and subaqueously using multibeam echo sounding (MBES) during near‐bankfull conditions. The contributions of various length scales of topographic irregularity to roughness for subaerial conditions were evaluated for different elevation contours on the bank faces using Hilbert–Huang Transform (HHT) spectral analysis. Statistical characteristics for discrete areas on the bank faces were determined by calculating the root‐mean‐square of normal distances from a triangulated irregular network (TIN) surface. Results of the HHT analysis show that the characteristics of roughness along bank faces composed primarily of non‐cohesive sediment, and eroding into cropland, vary with bank elevation and exhibit a dominant range of roughness length scales (~15–50 m). However, bank faces composed predominantly of cohesive material and carved into a forested floodplain have relatively uniform topographic roughness characteristics over the vertical extent of the bank face and do not exhibit a dominant roughness length scale or range of length scales. Additionally, comparison between local surface roughness for subaerial versus subaqueous conditions shows that roughness decreases considerably when the banks are submerged, most likely because of the removal of vegetation and eradication of small‐scale erosional features in non‐cohesive bank materials by flow along the bank face. Thus, roughness appears to be linked to the hydraulic conditions affecting the bank, at least relative to conditions that develop when banks are exposed subaerially. Copyright © 2017 John Wiley & Sons, Ltd.     

The sedimentology of river confluences

Channel confluences are key nodes within large river networks, and yet surprisingly little is known about their spatial and temporal evolution. Moreover, because confluences are associated with vertical scour that typically extends to several times the mean channel depth, the deposits associated with such scours should have a high preservation potential within the rock record. Paradoxically, such scours are rarely observed, and their preservation and sedimentological interpretation are poorly understood. The present study details results from a physically‐based morphodynamic model that is applied to simulate the evolution and alluvial architecture of large river junctions. Boundary conditions within the model were defined to approximate the junction of the Ganges and Jamuna rivers, Bangladesh, with the model output being supplemented by geophysical datasets collected at this junction. The numerical simulations reveal several distinct styles of sedimentary fill that are related to the morphodynamic behaviour of bars, confluence scour downstream of braid bars, bend scour and major junction scour. Comparison with existing, largely qualitative, conceptual models reveals that none of these can be applied simply, although elements of each are evident in the deposits generated by the numerical simulation and observed in the geophysical data. The characteristics of the simulated scour deposits are found to vary according to the degree of reworking caused by channel migration, a factor not considered adequately in current conceptual models of confluence sedimentology. The alluvial architecture of major junction scours is thus characterized by the prevalence of erosion surfaces in conjunction with the thickest depositional sets. Confluence scour downstream of braid bar and bend scour sites may preserve some large individual sets, but these locations are typically characterized by lower average set thickness compared to major junction scour and by a lack of large‐scale erosional surfaces. Areas of deposition not related to any of the specific scour types highlighted above record the thinnest depositional sets. This variety in the alluvial architecture of scours may go some way towards explaining the paradox of ancient junction scours, that while abundant large scours are likely in the rock record, they have been reported rarely. The present results outline the likely range of confluence sedimentology and will serve as a new tool for recognizing and interpreting these deposits in the ancient fluvial record.     

Anomalous electrical resistivity anisotropy in clean reservoir sandstones

We report novel laboratory measurements of the full electrical resistivity tensor in reservoir analogue quartzose sandstones with clay contents less than 1.5%. We show that clean, homogeneous, visually uniform sandstone samples typically display between 15% and 25% resistivity anisotropy with minimum resistivity normal to the bedding plane. Thin‐section petrography, analysis of fabric anisotropy, and comparison to finite‐element simulations of grain pack compaction show that the observed anisotropy symmetries and magnitudes can be explained by syn‐depositional and post‐depositional compaction processes. Our findings suggest that: electrical resistivity anisotropy is likely to be present in most clastic rocks as a consequence of ballistic deposition and compaction; compaction may be deduced from measurements of electrical anisotropy; and the anisotropy observed at larger scales in well logging and controlled‐source electromagnetic data, with maximum resistivity normal to bedding, is most likely the result of meso‐scale (10^?1 m–10¹ m) periodic layering of electrically dissimilar lithologies.     

Alluvial architecture of mid-channel fluvial–tidal barforms: The mesotidal Lower Columbia River,Oregon/Washington,USA

Barforms of mesotidal to macrotidal fluvial–tidal transitions, regardless of fluvial-discharge, are currently thought to display a sedimentary architecture dominated by tidal signatures. Due to the scarcity of observations from modern mesotidal fluvial–tidal transitions, especially those of multi-channelled large-rivers (mean annual discharge ≥7000 m³ s⁻¹ and peak discharges ≥15 000 m³ s⁻¹) with mid-channel bars, this concept remains unproven. The present study analyses data produced by a combination of high-resolution ground penetrating radar and coupled shallow vibracores (<5 m depth), collected from modern fluvial–tidal mid-channel bars of the mesotidal multi-channelled Lower Columbia River, Washington/Oregon, USA, which can experience peak discharges ≥18 000 m³ s⁻¹. These data were used alongside time-sequenced aerial imagery to characterize the spatio-temporal sedimentological evolution of these barforms in singular flows or combined flows consisting of river, tidal and/or wind-wave oscillatory, current components operating in unique fluvial–tidal transition regimes. Results indicate that ca 75% of the Lower Columbia River fluvial–tidal transition produces braid-bars with basal to bar-top sedimentological architectures that are indistinguishable from fluvial-only braid-bars recorded in the literature. Barform stratal characteristics within the fluvial–tidal transitions of mesotidal large-rivers are therefore more likely to be dominated by downstream-oriented currents. Furthermore, a new style of low-angle (<5°) inclined heterolithic stratification found in bar-top accretion-sets within upper-mixed tidal–fluvial regime braid-bars is observed. This common stratification is created by combined-flows characterized by intrabasinal wind-wave oscillatory-currents and bidirectional tidal-currents. This inclined heterolithic stratification marks the initial downstream fluvial–tidal crossover point from Lower Columbia River up-dip fully-fluvial braid-bar architectures, to those possessing bar-top facies produced by the hydraulic-sedimentation response of combined intrabasinal wind-wave and tidal influence. When preserved, this form of mid-channel bar inclined heterolithic stratification provides a unique sedimentological signature of multi-channelled fluvial–tidal transitions that possess an open-water lower basin with intrabasinal wind-waves.     

Quantification of bedform dynamics and bedload sediment flux in sandy braided rivers from airborne and satellite imagery

Images from specially-commissioned aeroplane sorties (manned aerial vehicle, MAV), repeat unmanned aerial vehicle (UAV) surveys, and Planet CubeSat satellites are used to quantify dune and bar dynamics in the sandy braided South Saskatchewan River, Canada. Structure-from-Motion (SfM) techniques and application of a depth-brightness model are used to produce a series of Digital Surface Models (DSMs) at low and near-bankfull flows. A number of technical and image processing challenges are described that arise from the application of SfM in dry and submerged environments. A model for best practice is presented and analysis suggests a depth-brightness model approach can represent the different scales of bedforms present in sandy braided rivers with low-turbidity and shallow (< 2 m deep) water. The aerial imagery is used to quantify the spatial distribution of unit bar and dune migration rate in an 18 km reach and three ~1 km long reaches respectively. Dune and unit bar migration rates are highly variable in response to local variations in planform morphology. Sediment transport rates for dunes and unit bars, obtained by integrating migration rates (from UAV) with the volume of sediment moved (from DSMs using MAV imagery) show near-equivalence in sediment flux. Hence, reach-based sediment transport rate estimates can be derived from unit bar data alone. Moreover, it is shown that reasonable estimates of sediment transport rate can be made using just unit bar migration rates as measured from 2D imagery, including from satellite images, so long as informed assumptions are made regarding average bar shape and height. With recent availability of frequent, repeat satellite imagery, and the ease of undertaking repeat MAV and UAV surveys, for the first time, it may be possible to provide global estimates of bedload sediment flux for large or inaccessible low-turbidity rivers that currently have sparse information on bedload sediment transport rates. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.