The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

A comparative mineralogical study of gas-related sediments of the Gulf of Cádiz

The Gulf of Cádiz area has been extensively surveyed in recent years and several gas-related fluid escape seafloor structures have been identified. In this study, gravity cores, collected during the ANASTASYA/00 and ANASTASYA/01 cruises, on mud volcanoes, hemipelagic sediments and dredged material from diapiric structures, have been studied. A comparative mineralogical analysis by XRD and SEM of samples from different areas has been performed in order to determine whether there is a characteristic mineralogy related to these fluid escape structures, and also to determine the origin of the mud matrix and constrain the depth of the parent units. The mineralogical analysis reflects the different origins of the different units described in the cores: hemipelagic material of the slope, clays that underlie the mud volcanoes and are discharged at the sea bottom surface, and authigenic and diagenetic minerals possibly involved in the anaerobic oxidation of methane in the mud volcano sediments.     

Intra-plant differences in seaweed nutritional quality and chemical defenses: Importance for the feeding behavior of the intertidal amphipod Orchestoidea tuberculata

As a result of their morphological complexity, large macroalgae show intra-thallus variations in their nutritional composition and secondary metabolite content, which influences the trophic ecology of herbivorous invertebrates, and ultimately their fitness. In this study, we evaluated for the first time the variability in nutritional quality (protein content, carbohydrates, lipids, and total organic matter), secondary metabolites (phlorotannins), and structure (shape and toughness) between blades and stipes of the macroalgae Durvillaea Antarctica. Specifically, we looked at their effect on feeding preference, rate of consumption, absorption efficiency, and growth rate of the amphipod Orchestoidea tuberculata, one of the most abundant organisms on Chilean sandy beaches. Proteins, carbohydrates, total organic matter and phlorotannin contents were significantly higher in blades than in stipes. Preference experiments revealed that the amphipods preferred blades when fresh pieces of blades and stipes were offered at the same time. Similar results were found when artificial food (in which structures of both parts of the alga were standardized) was offered, suggesting that shape and toughness of the two different parts of the alga did not influence preference patterns of O. tuberculata. Absorption efficiency of O. tuberculata was higher on blades compared to stipes. When the amphipods were kept with each of the algal parts separately (i.e. no choice), they consumed a significantly higher amount of stipe, which suggests that O. tuberculata used food quantity to compensate for the lower nutritional quality of stipes. The higher nutritional values of blades compared to stipes appears to explain observed preference patterns by O. tuberculata. Phlorotannin content did not appear to inhibit blade consumption, suggesting that the nutritional quality of the food could be more important than chemical defense in determining food choice in O. tuberculata. Growth did not differ between the amphipods maintained with either blades or stipes (i.e. no choice), which is consistent with the hypothesis of compensatory feeding. To conclude, O. tuberculata can actively select specific parts of an alga and this selection appears to be based on nutritional quality. The capacity for using different feeding strategies allow O. tuberculata, in some cases, to successfully exploit food types with different nutritional qualities.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.     

Tectonics of an extinct ridge-transform intersection,Drake Passage (Antarctica)

New swath bathymetric, multichannel seismic and magnetic data reveal the complexity of the intersection between the extinct West Scotia Ridge (WSR) and the Shackleton Fracture Zone (SFZ), a first-order NW-SE trending high-relief ridge cutting across the Drake Passage. The SFZ is composed of shallow, ridge segments and depressions, largely parallel to the fracture zone with an `en echelon' pattern in plan view. These features are bounded by tectonic lineaments, interpreted as faults. The axial valley of the spreading center intersects the fracture zone in a complex area of deformation, where N120° E lineaments and E–W faults anastomose on both sides of the intersection. The fracture zone developed within an extensional regime, which facilitated the formation of oceanic transverse ridges parallel to the fracture zone and depressions attributed to pull-apart basins, bounded by normal and strike-slip faults.On the multichannel seismic (MCS) profiles, the igneous crust is well stratified, with numerous discontinuous high-amplitude reflectors and many irregular diffractions at the top, and a thicker layer below. The latter has sparse and weak reflectors, although it locally contains strong, dipping reflections. A bright, slightly undulating reflector observed below the spreading center axial valley at about 0.75 s (twt) depth in the igneous crust is interpreted as an indication of the relict axial magma chamber. Deep, high-amplitude subhorizontal and slightly dipping reflections are observed between 1.8 and 3.2 s (twt) below sea floor, but are preferentially located at about 2.8–3.0 s (twt) depth. Where these reflections are more continuous they may represent the Mohorovicic seismic discontinuity. More locally, short (2–3 km long), very high-amplitude reflections observed at 3.6 and 4.3 s (twt) depth below sea floor are attributed to an interlayered upper mantle transition zone. The MCS profiles also show a pattern of regularly spaced, steep-inclined reflectors, which cut across layers 2 and 3 of the oceanic crust. These reflectors are attributed to deformation under a transpressional regime that developed along the SFZ, shortly after spreading ceased at the WSR. Magnetic anomalies 5 to 5 E may be confidently identified on the flanks of the WSR. Our spreading model assumes slow rates (ca. 10–20 mm/yr), with slight asymmetries favoring the southeastern flank between 5C and 5, and the northwestern flank between 5 and extinction. The spreading rate asymmetry means that accretion was slower during formation of the steeper, shallower, southeastern flank than of the northwestern flank.     

Long-term effects of tributyltin compounds on the baltic amphipod, Gammarus oceanicus

Amphipod larvae, Gammarus oceanicus, were exposed for 8 weeks to bis(tributyltin) oxide (TBTO) or tributyltin fluoride (TBTF), or for 5 weeks to leachates from tributyltin-containing antibiofouling paints. No larvae survived 8 weeks' exposure to 3 μg/litre TBTO or TBTF. Differential larval survival occurred during exposure to 0·3 gmg/litre of these same compounds. Paint leachates were shown to cause similar toxicity responses at comparable aqueous tributyltin concentrations. An examination of sublethal responses showed slight decreases in growth for larvae exposed to TBTO and to paint leachates, although responses at tributyltin levels below 1 μg/litre were not marked. Whole-animal oxygen consumption rates were not affected by low tributyltin exposure levels. While these studies demonstrate low level toxicity of tributyltins, effects on oxygen consumption and growth do not indicate a mode of action for these compounds.     

Miocene extensional detachments in the outcropping basement of the northern Alboran Basin (Betics) and their tectonic implications

Whether or not there are extensional detachment faults in the Alboran basement can be tested directly because a part of the Alboran Basin is now emerged. These detachments, related to crustal thinning beneath the Alboran Basin, occurred from the Aquitanian to Tortonian. The resulting extensional geometries can be described in general terms. During the Serravalian a considerable southwest extension of the basin took place, accompanied by south-southeast extension in the northern Gibraltar Arc. Other detachments affected by Serravalian extension can be found. The spreading of the Alboran was nearly coeval with roughly westward migration of the Gibraltar mountain front.     

The behaviour of a Cu(II) ion selective electrode in seawater; copper consumption capacity and copper determinations

Determinations of copper consumption capacity (CuCs.C) and labile copper concentrations in surface coastal seawater, using a copper ion selective electrode (Cu-ISE) potentiometric method under predominantly diffusive conditions, are reported. For evaluation of the copper concentrations, the points of the endpoint contiguity zone of the CuCs.C titration curve were treated by an ISE multiple standard addition technique. The results were compared with those obtained by means of a Chelex-100 (calcic form) ‘batch’ procedure-potentiometric stripping analysis.The labile copper of the sample was determined at concentrations down to 10.70 nM with an average RSD of 12%, independent of the Cu-ISE employed. For adjacent subsamples, the mean CuCs.C values obtained for El Way seawater were equivalent to 81.05 and 48.00 nM copper, with an RSD of 4 and 7%, and for Isla Santa Maria seawater the value was equivalent to 70.27 nM copper, with an RSD of 7%. The theoretical approach of the electrode diffusive mechanism proposed, which would depend, fundamentally, on the adsorptive, complexing and reducing properties of the dissolved organic matter in the seawater sample, allows simultaneous analytical determination of CuCs.C and labile copper concentration in seawater.     

Reference sediment core and paleogeography of the underwater Slupsk river foredelta in the Baltic Sea

Core Psd-590 (length 947 cm, water depth 124 m) penetrated the entire sequence of marine (Littorina) mud (730 cm) and stopped in gray lacustrine (Ancylus) clays with hydrotroilitic films. The Littorina mud is gray-colored, microlaminated in the interval of 730 to 700 cm, and dark gray with hydrotoilitic films and obscure microlamination higher in the section. According to the diatom data, typical marine sediments begin at the level of 620 cm, while the lithological-geochemical data indicate this change at the level of 730 cm. This level is marked by a considerable increase in the concentrations of SiO_2amorph, CO₂, C_org, and Mn in the sediments. In the interval of 730 to 620 cm, diatoms are represented by both freshwater and brackish-water species. The Littorina transgression began in the form of individual flows of saline North Sea waters into the Baltic Sea, which is evident from the microlamination and sharp peaks in the concentrations of the chemical elements. The transgression exhibits two weakening and one strengthening (core interval of 380 to 220 cm) stages; the latter was marked by the maximal water salinity. The post-Littorina mud contains molluscan shells and fish bones and is enriched in the fraction of 0.05–0.01 mm. The microlaminated Littorina mud was deposited during periods with stagnant conditions in the bottom water layer, while the homogenous sediments accumulated during periods of its aeration.