Geochemistry of suspended matter from the Baltic Sea 2. Results of bulk trace metal analysis by AAS

In 1984, on a transect covering the whole Baltic Sea and parts of the adjacent North Sea, 160 water samples were taken and analysed for their concentrations of particulate and dissolved metals. In addition, the suspended materials were investigated for their elemental bulk composition.The particulate fractions represented from about 5% (Cd, Cu and Ni) to 50% (Fe and Pb) of the total (particulate plus dissolved) concentrations. For some elements (Ba, Cd, Cu, Pb and Zn), the particulate matter from the surface microlayer was enriched with respect to those suspended materials taken from 0.2 m depth. This could reflect the atmospheric input of metal-rich aerosols. In anoxic deep waters, maximum contents of Zn (6400 μg g⁻¹), Cu (1330 μg g⁻¹) and Cd (12 μg g⁻¹) were observed in the particulate matter, indicating sulphidic forms. On the other hand, under oxic conditions the distribution coefficients (K_d) decreased with the water depth (Cd, Fe and Pb).Relative to global background levels, the particulate matter contained metal “excesses” amounting to more than 90% of the total contents (Cd, Mn, Pb and Zn). Automated electron probe X-ray microanalysis (EPXMA) revealed that the elemental composition of sediments is mainly governed by post-depositional processes of early diagenesis and is only weakly related to the composition of suspended matter in the overlying water body. For instance, in relation to surface mud sediments of the central Baltic net-sedimentation basins, Zn, Cd, Cu and Mn had 30–100% higher levels in the suspended materials. The general pattern of metal contents of particulate matter taken from 10 m depth on a transect between the Bothnian Bay and the North Sea were—possibly as a result of anthropogenic inputs—rather similar for Pb, Zn and Cu. For Fe and Mn, the distribution patterns along the transect were probably governed by the natural loading characteristics and by the biogeochemistry of those elements.     

Effect of dispersion on impulsive waves

The generation and propagation of surface waves resulting from suddenly created disturbances over water surfaces is investigated. The initial boundary conditions defining the disturbance are given either by a velocity of the free surface, an initial elevation of the free surface or a pressure impulsively applied on the free surface. It is shown that the corresponding three forms of solutions are related by a simple time derivative. Linear solutions are obtained in the cases where the wave motion is assumed to be nondispersive, mildly dispersive and fully dispersive, as well as in the case where the motion is given by the method of stationary phase. Criteria are established to indicate the limit of validity of each method.     

埕岛油田海上石油平台基础冲刷研究

海洋石油平台的建立会改变平台周围的水动力条件，其中平台的基础及与之连接的海底管缆(输油管道、注水管道、海底电缆等)附近产生冲刷现象，对平台和海底管缆的安全造成威胁。根据对研究区典型平台的4次实洲水深并结合以往资料，分析了埕岛油田海上石油平台基础冲刷的过程及其规律。     

南海北缘东部盆地油气资源研究

南海北缘东部的珠江口盆地及台西南盆地蕴藏着十分丰富的油气资源，根据区域构造背景、盆地发育分布的特点及中、新生代的油气地质条件，结合含油气构造、油气田、油气井的分布规律，利用油气资源评价的理论、方法，对区内的油气资源进行了综合研究，并按照油气资源状况划分出油气富集区、油气潜力区、油气远景区，在此基础上，再进一步划分出4条油气富集带、11条油气潜力带、8条油气远景带，充分显示了该区石油、天然气的分布规律和油气地质特点，为商业性的勘探开发和理论研究奠定了基础。     

REE distribution in water-sediment interface system at deep ocean floor

ＲＥＥｄｉｓｔｒｉｂｕｔｉｏｎｉｎｗａｔｅｒ－ｓｅｄｉｍｅｎｔｉｎｔｅｒｆａｃｅｓｙｓｔｅｍａｔｄｅｅｐｏｃｅａｎｆｌｏｏｒ￥ＺｈａｎｇＬｉｊｉｅ；ＬｉｕＪｉｈｕａａｎｄＹａｏＤｅ（ＲｅｃｅｉｖｅｄＦｅｂｒｕａｒｙ１，１９９４；ａｃｃｅｐｔｅｄＭａｙ...     

东太平洋沉积物U的地球化学

本文对地矿部“海洋四号”科学考察船１９８７－１９８９年在东赤道太平洋ＣＣ区所取得的２７个深海表层沉积样品进行Ｕ的地球化学分析，探讨了Ｕ在深海沉积中的地球化学行为，结果表明，不同类型沉积的Ｕ含量不同，平均值由大至小的次序的含沸石粘土（２．１６×１０＾－６），硅质粘土（１．９５×１０＾－６），硅质软泥（１．６５×１０＾－６），钙质硅质粘土（１．５９×１０＾－６），在同类型沉积中Ｕ的分散性较大；Ｕ在区域     

The European coastal zone: characterization and first assessment of ecosystem metabolism

The geomorphic, oceanographic, terrestrial and anthropogenic attributes of the European coastal zone are described and published data on ecosystem function (primary production and respiration) are reviewed. Four regions are considered: the Baltic Sea, Mediterranean Sea, Black Sea and the European Atlantic coast including the North Sea. The metabolic database (194 papers) suffers from a non-homogeneous geographical coverage with no usable data for the Black Sea which was therefore excluded from this part of our study. Pelagic gross primary production in European open shelves is, by far, the most documented parameter with an estimated mean of 41 mmol C m⁻² d⁻¹, the lowest value is reported in the Mediterranean Sea (21 mmol C m⁻² d⁻¹) and the highest one in the Atlantic/North Sea area (51 mmol C m⁻² d⁻¹). Microphytobenthic primary production, mostly measured in shallow areas, is extrapolated to the entire 0–200 m depth range. Its contribution to total primary production is low in all regions (mean: 1.5 mmol C m⁻² d⁻¹). Although macrophyte beds are very productive, a regional production estimate is not provided in this study because their geographical distribution along the European coastline remains unknown. Measurements of pelagic community respiration are clearly too sparse, especially below the euphotic zone, to yield an accurate picture of the fate of organic matter produced in the water column. With a mean value of 17 mmol C m⁻² d⁻¹, benthic community respiration consumes approximately 40% of the pelagic organic matter production. Estuaries generally exhibit high metabolic rates and a large range of variation in all parameters, except microphytobenthic primary production. Finally, the problem of eutrophication in Europe is discussed and the metabolic data obtained in the framework of the Land–Ocean Interactions in the Coastal Zone (LOICZ) project are compared with available direct measurements of net ecosystem production.     

Some controversial issues in theories of the solar differential rotation and dynamo

The following points are discussed:

Evaluation of gas production rates in some comets

Emission fluxes of CN, C₂ and C₃ carbon-bearing molecular species observed in the coma of comets Bennett (1969i 1970II), West (1975n 1976VI), P Halley (1982i), Hartley-Good (19851) and Bradfield (1987s) are analysed in the framework of Haser model. CN, C₂ and C₃ production rates are determined using recently derived fluorescence efficiencies. The dependence of CN, C₂ and C₃ production rates on the heliocentric distance and the possible correlations among these radicals is studied and briefly discussed.     

Mesozoic-Cenozoic tectonics and geodynamics of Altai, Tien Shan, and Northern Kazakhstan, from apatite fission-track data

Apatite fission-track (AFT) thermochronological modeling as a diagnostic tool for periods of stability (peneplanation) and tectonic activity (orogeny) has been broadly used in tectonic studies of Central Asia in recent years. We discuss more than 100 AFT ages of samples from the Kyrgyz Tien Shan and Altai and compare them with AFT data from northern Kazakhstan. Geological, geomorphological, and AFT data indicate intense activity in the Late Cenozoic Eurasian continental interior. The impact from the India-Eurasia collision on the northern Tien Shan, Altai, and northern Kazakhstan regions showed up at 11, 5, and 3 Ma, respectively, as a result of stress propagation into the continent, with the ensuing reactivation and mountain growth. We hypothesize that a distant effect of the Late Cenozoic India-Eurasia collision was to rejuvenate Paleozoic fault zones and to deform the Mesozoic sedimentary cover north of the collision front as far as the West Siberian Plate. The reactivation facilitated formation of tectonic oil and gas traps. The activity in northern Central Asia under the effect of the Indian indentation into Eurasia appears to continue and may evolve to include uplift of southern West Siberian plate with uplift.