Breakdown of hydrous ringwoodite to pyroxene and spinelloid at high P and T and oxidizing conditions

To get deeper insight into the phase relations in the end-member system Fe₂SiO₄ and in the system (Fe, Mg)₂SiO₄ experiments were performed in a multi-anvil apparatus at 7 and 13 GPa and 1,000–1,200°C as a function of oxygen fugacity. The oxygen fugacity was varied using the solid oxygen buffer systems Fe/FeO, quartz–fayalite–magnetite, MtW and Ni/NiO. The run products were characterized by electron microprobe, Raman- and FTIR-spectroscopy, X-ray powder diffraction and transmission electron microscopy. At fO₂ corresponding to Ni/NiO Fe-ringwoodite transforms to ferrosilite and spinelloid according to the reaction: 9 Fe₂SiO₄ + O₂ = 6 FeSiO₃ + 5 Fe_2.40Si_0.60O₄. Refinement of site occupancies in combination with stoichiometric Fe³⁺ calculations show that 32% of the total Fe is incorporated as Fe³⁺ according to From the Rietveld refinement we identified spl as spinelloid III (isostructural with wadsleyite) and/or spinelloid V. As we used water in excess in the experiments the run products were also analyzed for structural water incorporation. Adding Mg to the system increases the stability field of ringwoodite to higher oxygen fugacity and the spinel structure seems to accept higher Fe³⁺ but also water concentrations that may be linked. At oxygen fugacity corresponding to MtW conditions similar phase relations in respect to the breakdown reaction in the Fe-end-member system were observed but with a strong fractionation of Fe into spl and Mg into coexisting cpx. Thus, through this strong fractionation it is possible to stabilize very Fe-rich wadsleyite with considerable Fe³⁺ concentrations even at an intermediate Fe–Mg bulk composition: assuming constant K _D independent on composition and a bulk composition of x _Fe = 0.44 this fractionation would stabilize spl with x _Fe = 0.72. Thus, spl could be a potential Fe³⁺ bearing phase at P–T conditions of the transition zone but because of the oxidizing conditions and the Fe-rich bulk composition needed one would expect it more in subduction zone environments than in the transition zone in senso stricto.

Fifteen days of continuous activity survey at Stromboli volcano, Italy, in late September 2000: Doppler radar, seismicity, infrared, soil humidity, and mapping of the crater region

The intention of our study was to gain new insight into the complex interplay between different types of eruption of the Stromboli volcano by combining detailed field observation with different geophysical methods. We recorded more than 600 eruptions by use of continuous Doppler radar measurements. We detected the onset of the seismic precursor and the beginning of the visible eruption by use of seismic and infrared data. Two soil samples per day were used to monitor the effect of humidity on the eruptive style. We mapped the crater region as a reference base for the long-term morphological changes of the active region and for the exact positions of our measurement systems. Two distinct types of eruption were distinguished from each other on the basis of seismic and radar data - short, wide-angle Strombolian explosions and pulsating, sharp angle fountain-like eruptions. Data and visual observations imply that weather conditions significantly effect volcanic activity. We also interpret the intensification of eruptive activity during our field study as replenishment of the reservoir with a new batch of magma in late September 2000.     

Influence of gold mine on groundwater quality (Efemçukuru, Izmir, Turkey)

. Currently, exploration of gold ores is under discussion in Turkey, without considering its adverse affect on the environment. Studying the adverse affect on environment is extremely important because significant civic activities are already taking place on the geological units that contain gold ore bodies in Turkey. Such an area is located at the southeast of Izmir City (Turkey), and approximately 2-km-long gold-bearing ore veins occur close to the Efemçukuru Village. The objective of this study was to describe the characteristics and seasonal variation of the groundwater chemistry and pollution of the aquifer in the ore deposit site, and to determine the impact of ore deposits on groundwater quality. The gold-bearing formation is highly weathered and fractured. The fractures in the geological units control the permeability and the depth of groundwater in the area. The concentrations of Al, Ag, Cu, Cd, Cr, Fe, Pb, Mn, Zn, Ni, and Sb were determined for four well samples and two stream waters for wet and dry seasons. The results showed that the concentrations of most of these elements were below the USA EPA (Environmental Protection Agency) limits; however, Pb and Cd concentrations are slightly above the limits. The results indicate that minerals in gold bodies do not dissolve although the weathering of formations is high. The low concentration of elements in groundwater and streams may be attributed to the high velocity of ground and surface water.     

The south-western Black Forest and the Upper Rhine Graben Main Border Fault: thermal history and hydrothermal fluid flow

The thermal history of the south-westernmost Black Forest (Germany) and the adjacent Upper Rhine Graben were constrained by a combination of apatite and zircon fission-track (FT) and microstructural analyses. After intrusion of Palaeozoic granitic plutons in the Black Forest, the thermal regime of the studied area re-equilibrated during the Late Permian and the Mesozoic, interrupted by enhanced hydrothermal activity during the Jurassic. At the eastern flank of the Upper Rhine Graben along the Main Border Fault the analysed samples show microstructural characteristics related to repeated tectonic and hydrothermal activities. The integration of microstructural observations of the cataclastic fault gouge with the FT data identifies the existence of repeated tectonic-related fluid flow events characterised by different thermal conditions. The older took place during the Variscan and/or Mesozoic time at temperatures lower than 280°C, whereas the younger was probably contemporary with the Cenozoic rifting of the Upper Rhine Graben at temperatures not higher than 150°C.     

Comparison of net primary productivity in karst and non-karst areas: a case study in Guizhou Province,China

Green plants play an important role in energy flows and material cycles. The net primary productivity (NPP) reflects the capability of vegetation to convert solar energy into photosynthate (fixed carbon). Understanding the factors that contribute to variations in NPP is of key importance for improving the rock-desertification environment in karst areas. In this paper, the NPP model (Light Use Efficiency model) is modified on the basis of remote sensing data [moderate resolution imaging spectroradiometer (MODIS)], climate data and observed information. Then the model is employed to estimate the spatial–temporal variations of NPP in the Guizhou Province, China. Finally, the NPP differences between karst area and non-karst area, and the relationships between NPP and climate factors are analyzed. The results show that the NPP estimated using MODIS data are reasonable. The mean NPP of territorial vegetation is 421.46 gC m⁻² year⁻¹; the NPP in the non-karst area is 13.3% higher than that in the karst area; the correlation degree between NPP and precipitation is better in southeastern and western districts.     

Thermal expansion and high-temperature P21/c–C2/c phase transition in clinopyroxene-type LiFeGe2O6 and comparison to NaFe(Si,Ge)2O6

A synthetic clinopyroxene with composition LiFe³⁺Ge₂O₆, monoclinic s.g. P2₁/c, a = 9.8792(7), b = 8.8095(5), c = 5.3754(3) Å, β = 108.844(6)°, V = 442.75(16) ų, has been studied by in situ low- and high-temperature single-crystal X-ray diffraction. The variation of lattice parameters and the intensity of the b-type reflections (h + k = 2n + 1, only present in the P-symmetry) with increasing temperature showed a displacive phase transition from space group P2₁/c to C2/c at a transition temperature T _tr = 789 K, first order in character, with a sudden volume increase of 1.6% and a decrease of β by 1° at the transition. This spontaneous dilatation is reversible, shows a limited hysteresis of ±10°C, and corresponds to the vanishing of the b-type reflections, thus indicating a symmetry increase to space group C2/c. Below T _tr an expansion is observed for all the cell parameters, while the β angle remained almost constant; at T > T _tr the thermal volume expansion is due to dilatation of the structure in the $(\bar{1}\,0\,1) A synthetic clinopyroxene with composition LiFe³⁺Ge₂O₆, monoclinic s.g. P2₁/c, a = 9.8792(7), b = 8.8095(5), c = 5.3754(3) ?, β = 108.844(6)°, V = 442.75(16) ?³, has been studied by in situ low- and high-temperature single-crystal X-ray diffraction. The variation of lattice parameters and the intensity of the b-type reflections (h + k = 2n + 1, only present in the P-symmetry) with increasing temperature showed a displacive phase transition from space group P2₁/c to C2/c at a transition temperature T _tr = 789 K, first order in character, with a sudden volume increase of 1.6% and a decrease of β by 1° at the transition. This spontaneous dilatation is reversible, shows a limited hysteresis of ±10°C, and corresponds to the vanishing of the b-type reflections, thus indicating a symmetry increase to space group C2/c. Below T _tr an expansion is observed for all the cell parameters, while the β angle remained almost constant; at T > T _tr the thermal volume expansion is due to dilatation of the structure in the ([`1] 0 1)(\bar{1}\,0\,1) plane, mostly along [0 1 0], and pure shear in the (0 1 0) plane due to the decrease of β. From comparison with silicate analogues, the germanate clinopyroxenes are more expansible, while the P2₁/c expands more than the C2/c phase. The evolution of Q ² (calculated as the normalized intensity of b-type reflections) with T in the framework of the Landau theory has been done using a standard expression for a first order phase transition. We observe a jump of Q ₀² = 0.538(2) at T _tr, with T _c of 481(7) K, b/a = −2,290 K, and c/a = 3,192 K, and thus far from being tri-critical point. A closely related composition (LiFe³⁺Si₂O₆) shows an equivalent phase transition at 228 K, which is very close to the tri-critical point and 561 K cooler. This result indicates that a change in the composition of tetrahedral sites can have dramatic effects on the P2₁/c ↔ C2/c displacive phase transition in clinopyroxenes. The major changes observed in the evolution of the crystal structure with T are observed in the M2 polyhedron, with a volume decrease by ca. 13.3%, compared to ca. 1.3% observed in the M1 polyhedron. The tetrahedra behave as rigid units with neither a significant change of volume at T > T _tr (<1‰), nor a change of tilting of the basal plane. No change in coordination is observed at T > T _tr in the M2 polyhedron, which remains sixfold coordinated although a strong deformation of this polyhedron is observed. This deformation is related to a strong change by 51.4° at T _tr of the kinking angle (O3–O3–O3 angle) of the B-chain of tetrahedra, which switches from O-rotated to S-rotated [from 143.3(5)° to 194.7(6)°]. The A-chain is S-rotated at T < T _tr [206.8(5)° at 703 K] and extends by 12° at the transition.     

Pseudosection modelling for a selected eclogite body from the Koralpe (Hohl), Eastern Alps

In the Kor-, Saualpe and Pohorje regions of the Eastern Alps eclogite bodies occur within metapelitic gneisses. The bodies are between 1 meter and several hundreds of meters in size and some of them were defined by Haüy (1822) as the type locality for the rock type “eclogite”. A growing body of petrological work has documented the metamorphic evolution of the metapelites surrounding the eclogites. However, few phase diagrams have been constructed for the eclogite bodies themselves. Here we use recently available activity models for amphiboles to present new thermodynamic pseudosections for the Hohl locality of the Koralpe eclogites. We show that this eclogite reached peak conditions in a narrow PT field obliquely oriented in PT space between 16.5 and 20.5 kbar and 620°C to 720°C and that its metamorphic evolution was likely to have occurred under water saturated conditions. We conclude that eclogite and the surrounding metapelites have certainly undergone the same metamorphic peak in Eo-alpine time. Comparison of our results with different PT estimates on the eclogite from Pohorje, suggest that a PT gradient from Koralpe to Pohorje is likely.     

Melt extraction pathways and stagnation depths beneath the Madeira and Desertas rift zones (NE Atlantic) inferred from barometric studies

The Madeira and Desertas Islands (eastern North Atlantic) show well-developed rift zones which intersect near the eastern tip of Madeira (São Lourenço peninsula). We applied fluid inclusion barometry and clinopyroxene-melt thermobarometry to reconstruct levels of magma stagnation beneath the two adjacent rifts and to examine a possible genetic relationship during their evolution. Densities of CO₂-dominated fluid inclusions in basanitic to basaltic samples from São Lourenço yielded frequency maxima at pressures of 0.57–0.87 GPa (23–29 km depth) and 0.25–0.32 GPa (8–10 km), whereas basanites, basalts and xenoliths from the Desertas indicate 0.3–0.72 GPa (10–24 km) and 0.07–0.12 GPa (2–3 km). Clinopyroxene-melt thermobarometry applied to Ti-augite phenocryst rim and glass/groundmass compositions indicates pressures of 0.45–1.06 GPa (15–35 km; São Lourenço) and 0.53–0.89 GPa (17–28 km; Desertas Islands) which partly overlap with pressures indicated by fluid inclusions. We interpret our data to suggest a multi-stage magma ascent beneath the Madeira Archipelago: main fractionation occurs at multiple levels within the mantle (>15 km depth) and is followed by temporary stagnation within the crust prior to eruption. Depths of crustal magma stagnation beneath São Lourenço and the Desertas differ significantly, and there is no evidence for a common shallow magma reservoir feeding both rift arms. We discuss two models to explain the relations between the two adjacent rift systems: Madeira and the Desertas may represent either a two-armed rift system or two volcanic centres with separate magma supply systems. For petrological and volcanological reasons, we favour the second model and suggest that Madeira and the Desertas root in distinct regions of melt extraction. Magma focusing into the Desertas system off the hotspot axis may result from lithospheric bending caused by the load of the Madeira and Porto Santo shields, combined with regional variations in melt production due to an irregularly shaped plume.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial responsibility: J. Hoefs     

A comparison of the GIS based landslide susceptibility assessment methods: multivariate versus bivariate

The purpose of this study is to evaluate and to compare the results of multivariate (logical regression) and bivariate (landslide susceptibility) methods in Geographical Information System (GIS) based landslide susceptibility assessment procedures. In order to achieve this goal the Asarsuyu catchment in NW Turkey was selected as a test zone because of its well-known landslide occurrences interfering with the E-5 highway mountain pass.Two methods were applied to the test zone and two separate susceptibility maps were produced. Following this a two-fold comparison scheme was implemented. Both methods were compared by the Seed Cell Area Indexes (SCAI) and by the spatial locations of the resultant susceptibility pixels.It was found that both of the methods converge in 80% of the area; however, the weighting algorithm in the bivariate technique (landslide susceptibility method) had some severe deficiencies, as the resultant hazard classes in overweighed areas did not converge with the factual landslide inventory map. The result of the multivariate technique (logical regression) was more sensitive to the different local features of the test zone and it resulted in more accurate and homogeneous susceptibility maps.