EARLY INTELLECTUAL INFLUENCES ON D. W. MEINIG: A FORMER STUDENT'S FOND MEMORIES*

ABSTRACT. As an undergraduate and graduate student in the 1940s and a young professor at the University of Utah in the 1950s, D. W. Meinig was influenced by a number of scholars. They included six historians, three geographers, two anthropologists, and two philosophers. I identify the influence of the thirteen scholars on Meinig's major achievements: the culture area model, geography as an art, the historical imperative for geography, cultures and civilizations, and geopolitics and imperialism.     

SPECTRAL ANALYSIS OF GEOMORPHIC TIME SERIES: AUTO-SPECTRUM

The collection of time series data is an essential component in the investigation of earth surface processes. Spectral analysis of these time series can provide an invaluable insight into the behaviour of geophysical processes. Spectral analysis of a single time series produces an auto-spectrum which provides a representation of the amount variance of the time series as a function of frequency. Prior to spectral analysis, the time series should be plotted to identify the presence of any trends in the mean or the variance of the series, and to identify anomalies in the data which should be corrected. To satisfy the assumption of stationarity, any trend (in either the mean or variance) should be removed from the time series. Consequently, the probability density function of the time series should be plotted and compared with the Gaussian distribution. The final stage in preparing the time series for spectral analysis is to apply a taper to reduce spectral leakage and distortion of the auto-spectrum. Following the calculation of the periodogram, spectral estimates should be combined to reduce the variability associated with the estimates and thereby ensure that the autospectrum is more representative. Finally, confidence limits should be constructed around the spectral density function so that statistically significant spectral peaks (or troughs) can be identified.     

The meaning of oscillations in unit hydrograph S-curves

ABSTRACT

The Duhamel superposition integral is used to obtain some exact solutions for unit hydrograph applications. These equations and numerical examples are used to show that oscillations will occur in an S-curve when the time step is less than the excess rainfall duration if the measured hydrograph differs from a hydrograph that would be obtained by solving a linear differential equation with time-independent coefficients. The implications of this result with regard to the calculation of the instantaneous unit hydrograph (IUH) are discussed.     

Active synsedimentary tectonism on a mixed carbonate–siliciclastic continental margin: third‐order sequence stratigraphy of a ramp to basin transition,lower Sekwi Formation,Selwyn Basin,Northwest Territories,Canada

The lower part of the Early Cambrian Sekwi Formation in the Selwyn Basin of the Northwest Territories, Canada, is composed of two regional, unconformity‐bounded sequences, S0 and S1, which record the first widespread carbonate deposition during the initial Palaeozoic transgression onto the western margin of Laurentia. These Early Cambrian sequences are unique to the western North American Cordillera, representing the only record of primarily deep‐water deposition on a tectonically active, mixed carbonate–siliciclastic ramp during this period. More specifically, the geometry of the Sekwi ramp changed during deposition of S0 and S1, from a shallowly dipping homoclinal ramp during the S0 transgressive systems tract to a steeply dipping tectonically modified ramp during the early highstand systems tract of S0. The steeply dipping ramp profile of S0 was preserved into the early transgressive systems tract of S1. The Sekwi ramp returned to a gently sloping ramp during the late highstand systems tract of S1 and remained so throughout the remainder of Sekwi deposition. The evolving shape of the Sekwi ramp is attributed to syndepositional ‘down to the basin’ faulting during deposition of both S0 and S1 and is recorded by: (i) the westward thickening, irregular geometries of S0 and S1; (ii) geographical restriction of deep‐water facies (including sediment gravity flow deposits); (iii) the presence of large allochthonous blocks; and (iv) the clast composition of sediment gravity flow deposits. Sediment gravity flow deposits play an unusually important role in the sequence stratigraphic interpretation of the lower Sekwi Formation, as they delineate depositional packages, including the maximum flooding zone, the transitions between portions of systems tracts, and the inferred locations of syntectonic extensional faults. Syntectonic faults increased accommodation basinward of an extensive ooid‐shoal complex that developed along the Sekwi ramp crest, greatly influencing sequence geometry and initiating the downslope motion of sediment gravity flows. The syndepositional faulting probably was a continuation of extension that began during the latest Neoproterozoic rifting of western Laurentia. The composition of sediment gravity flow deposits track changing accommodation space on the lower Sekwi ramp and can be used to differentiate systems tracts that probably were related more to tectonism than eustasy.     

Mapping Submerged Aquatic Vegetation with GIS in the Caloosahatchee Estuary: Evaluation of Different Interpolation Methods

This article evaluates different spatial interpolation methods for mapping submerged aquatic vegetation (SAV) in the Caloosahatchee Estuary, Florida. Data used for interpolation were collected by the Submersed Aquatic Vegetation Early Warning System (SAVEWS). The system consists of hydro-acoustic equipment, which operates from a slow-moving boat and records bottom depth, seagrass height, and seagrass density. This information is coupled with geographic location coordinates from a Global Positioning System (GPS) and stored together in digital files, representing SAV status at points along transect lines. Adequate spatial interpolation is needed to present the SAV information, including density, height, and water depth, as spatially continuous data for mapping and for comparison between seasons and years. Interpolation methods examined in this study include ordinary kriging with five different semivariance models combined with a variable number of neighboring points, the inverse distance weighted (IDW) method with different parameters, and the triangulated irregular network (TIN) method with linear and quintic options. Interpolation results were compared with survey data at selected calibration transects to examine the suitability of different interpolation methods. Suitability was quantified by the determination coefficient (R2) and the root-mean-square error (RMSE) between interpolated and observed values. The most suitable interpolation method was identified as the one yielding the highest R2 value and/or the lowest RMSE value. For different geographic conditions, seasons, and SAV parameters, different interpolation methods were recommended. This study identified that kriging was more suitable than the IDW or TIN method for spatial interpolation of all SAV parameters measured. It also suggested that transect data with irregular spatial distribution patterns such as SAV parameters are sensitive to interpolation methods. An inappropriate interpolation method such as TIN can lead to erroneous spatial representation of the SAV status. With a functional geographic system and adequate computing power, the evaluation and selection of interpolation methods can be automated and quantitative, leading to a more efficient and accurate decision.     

The Bearing of Lead Isotopes on the Source of Granitic Magma

The isotopic composition of lead was measured in Mesozoic andCenozoic igneous rocks (including volcanic glasses, olivinebasalts, and potassium feldspars from granitic rocks) of thecoastal region (California, Oregon, and Washington)-where meltingis possible at the bottom of a Phanerozoic sedimentary pilel—landin similar rocks of the continental interior region (Rocky Mountainprovinces, southwestern New Mexico, South Dakota, and Texas)—where Precambrian rocks are shallow or surround the Mesozoicand Cenozoic igneous rocks at the surface. The coastal region is typified by a narrow range in lead isotopiccomposition and by isotope ratios more radiogenic than expectedfrom closed system models (J type). The continental interiorregion is typified by a broad range in lead isotopic composition,even within an individual magmatic complex such as the Boulderbatholith, and by at least one isotope ratio that is less radiogenicthan expected from closed system models (B type) and than foundin the coastal region. If, as suggested by available data in the literature, most Precambrianand Paleozoic granitic rocks have leads more radiogenic thanclosed system models predict by the time of the Cenozoic Era,granitic rocks, in the continental interior region at least,cannot form by complete melting of older granitic rocks. Therocks may have been formed by one of the following mechanisms(in the order of the author‘s preference): (1) Differentiationfrom or partial melting of a basaltic-gabbroic parent coupledwith crustal assimilation. (2) Differentiation or partial meltingfrom a basaltic-gabbroic parent having U/Pb and Th/Pb characteristicsin the continental interior different from those of the coastalregions and ocean basins. (3) Partial melting of upper crustalrocks. It is difficult to choose between mechanisms 1 and 2;mechanism 3 appears to be in disagreement with results of workon Rb-Sr and therefore appears to be less likely than the othertwo. The differences in isotopic characteristics of the igneousrocks in the coastal and continental interior regions can beexplained (1) if the predominant crustal assimilation takesplace in the upper crust through partial assimilation of Phanerozoicor Preqambrian rocks, whichever happen to be present near thesurface in the area or, (2) if some other mechanism occurred,such as partial melting of the mantle in coastal regions andpartial melting of the lower crust in the interior regi     

Evidence of across-shelf transport of fine-grained sediments: turbidite-filled shelf channels in the Campanian Aberdeen Member, Book Cliffs, Utah, USA

The shore‐normal transport of fine‐grained sediments by shelf turbidity currents has been the focus of intense debate over the last 20 years. Many have argued that turbidity currents are unlikely to be a major depositional agent on the shelf. However, sedimentological, architectural, stratigraphic and palaeogeographic data from the Campanian Aberdeen Member, Book Cliffs, eastern Utah suggests otherwise and clearly demonstrates that storm‐generated and river flood‐generated underflows can transport a significant volume of fine‐grained sediments across the shelf. These across‐shelf flowing turbidity currents cut large subaqueous channel complexes up to 7 m deep, tens of kilometres basinward of their time‐equivalent shoreface. The shelf channels were filled with organic‐rich siltstones, mudstones and very fine‐ to fine‐grained Bouma‐like sandstone beds, including wave‐modified turbidites, hyperpycnites and classical turbidites. Deposition was above storm wave base. Palaeocurrent data reveal an overwhelmingly dominant across‐shelf (east–south‐east), offshore‐directed transport trend. Tectonic activity and/or concomitant palaeogeographic reorganization of the basin may favour the generation of these turbidite‐rich shelf deposits by altering the relative balance of wave versus fluvial energy. Increased erosion and sediment supply rates, because of tectonic uplift of the hinterland, may have increased the probability of fluvial dominance along the coastline and, hence, the possibility of submarine channelization in front of the river mouths. Additionally, the coastline may have become more sheltered from direct wave energy, thus allowing the fluvial processes to dominate. Seasonal increases in rainfall and storm activity may also favour the generation of across‐shelf underflows. On wave‐dominated shorelines, isolated shelf channels and lobes are most likely to be found down‐dip of fluvial‐feeder systems in relatively high sediment supply settings. These features are also most likely to occur in systems tracts that straddle a sequence boundary, especially those which are tectonically generated, as these would enhance the potential for altering basin morphology and, hence, the balance of fluvial and wave energy. Isolated shelf channels are recognized in older and younger strata in the Book Cliffs region, implying that wave‐supported gravity flows were a recurrent phenomena in the Campanian of Utah. It is probable that isolated shelf bodies are preserved in other stratigraphic intervals in the Cretaceous Western Interior of North America, and other basins worldwide, and are currently being overlooked or misidentified. Shoreface‐to‐shelf facies models should be revised to incorporate turbidite‐rich shelf deposits in some shelf settings.     

Magma Genesis and Mantle Heterogeneity in the Manus Back-Arc Basin, Papua New Guinea

Geochemical data from back-arc volcanic zones in the Manus Basinare used to define five magma types. Closest to the New Britainarc are medium-K lavas of the island arc association and back-arcbasin basalts (BABB). Mid-ocean ridge basalts (MORB), BABB andmildly enriched T-MORB (transitional MORB) occur along the ManusSpreading Center (MSC) and Extensional Transform Zone (ETZ).The MSC also erupted extreme back-arc basin basalts (XBABB),enriched in light rare earth elements, P, and Zr. Compared withnormal MORB, Manus MORB are even more depleted in high fieldstrength elements and slightly enriched in fluid-mobile elements,indicating slight, prior enrichment of their source with subduction-relatedcomponents. Chemical variations and modeling suggest systematic,coupled relationships between extent of mantle melting, priordepletion of the mantle source, and enrichment in subduction-relatedcomponents. Closest to the arc, the greatest addition of subduction-relatedcomponents has occurred in the mantle with the greatest amountof prior depletion, which has melted the most. Variations inK₂O/H₂O indicate that the subduction-related component is bestdescribed as a phlogopite and/or K-amphibole-bearing hybridizedperidotite. Magmas from the East Manus Rifts are enriched inNa and Zr with radiogenic ⁸⁷Sr/⁸⁶Sr, possibly indicating crustalinteraction in a zone of incipient rifting. The source for XBABBand lavas from the Witu Islands requires a mantle componentsimilar to carbonatite melt. KEY WORDS: Manus back-arc basin, mantle metasomatism, magma generation     

Geochemical Constraints on the Role of Oceanic Lithosphere in Intra-Volcano Heterogeneity at West Maui, Hawaii

Stratigraphically well-constrained sequences of late shield-buildingstage lavas from West Maui volcano, Hawaii, show age-dependentcompositional variability distinct from that seen in shield-stagelavas from any other Hawaiian volcano. These distinctions aredefined by ²⁰⁶Pb/²⁰⁴Pb–²⁰⁸Pb/²⁰⁴Pb variation as well as⁸⁷Sr/⁸⁶Sr correlation with ²⁰⁶Pb/²⁰⁴Pb and trace element compositions.The West Maui lavas from stratigraphically higher in the sequencehave major and trace element and Sr–Pb–Hf–Ndisotopic compositions similar to Kea-type lavas sampled at theyounger Mauna Kea and Kilauea volcanoes, indicating that theKea compositional end-member of Hawaiian lavas has remainedhomogeneous over