Sedimentology of cherts in the Early Proterozoic Wishart Formation, Quebec-Newfoundland, Canada

The siliciclastic Wishart Formation of the Early Proterozoic Labrador trough is a high-energy shelf deposit. Wishart sandstones contain both interstitial chert with textures of void-filling cement and thin chert intercalations contaminated with siliciclastic mud. Although volumetrically minor, these cherts occur in several thin, areally extensive stratigraphic intervals. The Wishart contains intraclasts of both the chert-cemented sandstone and the impure chert layers (as well as several other types of chert sand and gravel). This suggests the cherts formed penecontemporaneously, which is consistent with the absence of any signs of replacement in all but one of the chert types and the clear-cut distinctions between chert types, even where they are side by side in a single thin section. The origin which appears to be most compatible with available evidence is that the cherts represent silica precipitated from thermal waters that rose through the sediments of the Wishart shelf and discharged into suprajacent seawater. A biogenic origin is unlikely in view of the lack of appropriate organisms during the Early Proterozoic and the rapidity with which the cements formed. A volcanogenic origin is unlikely because volcaniclastic textures are plentiful in associated formations but absent from the Wishart. Precipitation induced by evaporative concentration is unlikely in view of the widespread evidence of tidal currents and the lack of evidence of desiccation in the Wishart. Finally, the cherts are not restricted to the lowest-energy facies, and therefore they presumably did not accumulate as a background sediment. Deposition of silica above the sediment/water interface was probably made possible by ambient concentrations of silica that were significantly higher than those of Phanerozoic seawater. Cherts with similar textures occur in other Early Proterozoic sediments, most notably arenitic or granular iron-formations.     

Multiple flow and support mechanisms and the development of inverse grading in a subaquatic glacigenic debris flow

Subaquatic glacigenic debris flows of Late Wisconsinan age occur as lobes within an ice-marginal glaciomarine lithofacies at Victoria, British Columbia. Flow was initiated by release of supraglacial debris during an interval of glacial ablation prior to advance and deposition of lodgement till. Many of the lobes developed a common morphology during deposition, consisting of an outer layer surrounding an inner core of rafted material. In the largest lobe reworking of the sediment during flow produced improved sorting, a coarsening of mean grain size, and a shift in skewness toward the negative. This occurred simultaneously within the core and outer layer as a result of different transformations in mechanisms of flow and support. Normal grading, produced in the outer layer, was conveyed around the nose and buried in an inverse position along the base of the flow. These data enable us to present a model that may be applicable to similar flows elsewhere. The flow studied demonstrates that transformations between flow types and sediment support mechanisms can occur simultaneously and serially in subaquatic debris flows.     

Assimilation of Crustal Material by Basaltic Magma: Strontium Isotopic and Trace Element Data from the Edgecumbe Volcanic Field, SE Alaska

The Edgecumbe volcanics, which range from basalt through rhyodacite,have Sr contents between 125 and 370 p.p.m., Rb contents of1 to 70 p.p.m., Ba ranging from 50–550 p.p.m. and initial⁸⁷Sr/⁸⁶Sr ratios between 0.70291 and 0.70404. No simple correlationexists between these components and silica. The highest ⁸⁷Sr/⁸⁶Srvalues occur in a group of intermediate lavas (55–60 wt.per cent SiO₂) while the rhyodacites have initial ratios between0.7035 and 0.7038. With increasing silica, Sr increases to amaximum in the andesites and then steadily decreases; Ba andRb increase over the same compositional range. The highest ⁸⁷Sr/⁸⁶Srlavas have major and trace element concentrations which departfrom trends defined by most of the lavas. The variation in strontiumisotopic compositions suggests interaction between parentalbasaltic magma and crustal material. Attempts to model the assimilationprocess using fixed end-member assimilation and assimilation-fractionalcrystallization models have failed to produce the observed chemicaltrends. Because the parental basaltic liquid underwent littlefractionation, the variability in hybrid lavas is attributedto variation in contaminant composition. Initial melts werelow in CaO, A1₂O₃, MgO and Sr and enriched in SiO₂. K₂O, Na₂O,Rb and Ba. As melting progressed, melts became enriched in themore refractory components. Because hybrid strontium isotopiccomposition is a function of Sr concentration as well as isotopiccompositions, the Sr content of the assimilant strongly influencesresultant isotopic systematics. The development of the assimilantssuggests plagioclase was a residual phase during early melting.This model of crustal assimilation represents one end-memberin the spectrum of processes responsible for the generationof continental volcanic suites.     

A TEST OF THREE FITTING CRITERIA FOR MULTIRESPONSE NON-LINEAR MODELING

This work evaluates objective functions for multiresponse non-linear modeling using computersimulations.Tests are performed under a variety of signal-to-noise ratios and noise variance-covariancestructures.The standard error of prediction for the model parameters,computed from 50 trials,is usedfor performance comparisons.The full rank and rank-deficient problems are considered.For the fullrank problem one model was investigated,a first-order two-step consecutive reaction model,and twoobjective functions were considered,the total sum of squares and the determinant criterion.Nodistinction could be made between the two objective functions for this model.For the rank-deficient case two models were investigated,a first-order two-step consecutive reactionas in the full rank case,and a pH titration model described by the Henderson-Hasselbalch equation.Three objective functions were investigated for the rank-deficient case,the total sum of squares,aweighted total sum of squares and the determinant criterion.The total sum of squares was found toperform poorly under all conditions tested compared to the weighted total sum of squares and thedeterminant criterion.The determinant criterion was found to perform much better than the other twocriteria when the data have a combination of a low signal-to-noise ratio and high variance-covariancenoise structure.     

TENSORIAL RESOLUTION:A DIRECT TRILINEAR DECOMPOSITION

Modern instrumentation in chemistry routinely generates two-dimensional(second-order)arrays of data.Considering that most analyses need to compare several samples,the analyst ends up with a three-dimensional(third-order)array which is difficult to visualize or interpret with the conventional statisticaltools.Some of these data arrays follow the so-called trilinear model,(?)These trilinear arrays of data are known to have unique factor analysis decompositions which correspondto the true physical factors that form the data,i.e.given the array (?),a unique solution can be found inmany cases for each order X,Y and Z.This is in contrast to the well-known second-order bilinear datafactor analysis,where the abstract solutions obtained are not unique and at best cannot be easilycompared with the underlying physical factors owing to a rotational ambiguity.Trilinear decompositions have had the disadvantage,however,that a non-linear optimization withmany parameters is necessary to reach a least-squares solution.This paper will introduce a method forreducing the problem to a rectangular generalized eigenvalue-eigenvector equation where the eigenbectorsare the contravariant form(pseudo-inverse)of the actual factors.It is shown that the method works wellwhen the factors are linearly independent in at least two orders(e.g.X_(jr),and Y_(jr) are full rank matrices).Finally,it is shown how trilinear decompositions relate to multicomponent calibration,curve resolutionand chemical analysis.     

The Effects of GPS Carrier Phase Ambiguity Resolution on Jason-1

We have used GPS carrier phase integer ambiguity resolution to investigate improvements in the orbit determination for the Jason-1 satellite altimeter mission. The technique has been implemented in the GIPSY orbit determination software developed by JPL. The radial accuracy of the Jason-1 orbits is already near 1 cm, and thus it is difficult to detect the improvements gained when the carrier phase ambiguities are resolved. Nevertheless, each of the metrics we use to evaluate the orbit accuracy (orbit overlaps, orbit comparisons, satellite laser ranging residuals, altimeter crossover residuals, orbit centering) show modest improvement when the ambiguities are resolved. We conservatively estimate the improvement in the radial orbit accuracy is at the 10–20% level.     

Dehydration Melting of Metabasalt at 8-32 kbar: Implications for Continental Growth and Crust-Mantle Recycling

We report the results of partial melting experiments between8 and 32 kbar, on four natural amphibolites representative ofmetamorphosed Archean tholeiite (greenstone), high-alumina basalt,low-potassium tholeiite and alkali-rich basalt. For each rock,we monitor changes in the relative proportions and compositionof partial melt and coexisting residual (crystalline) phasesfrom 1000 to 1150C, within and beyond the amphibole dehydrationreaction interval. Low percentage melts coexisting with an amphiboliteor garnet amphibolite residue at 1000–1025C and 8–16kbar are highly silicic (high-K₂O granitic at 5%; melting, low-Al₂O₃trondhjemitic at 5–10%). Greater than 20% melting is onlyachieved beyond the amphibole-out phase boundary. Silicic tointermediate composition liquids (high-Al₂O₃ trondhjemitic-tonalitic,granodioritic, quartz dioritic, dioritic) result from 20–40%melting between 1050 and 1100C, leaving a granulite (plagioclase+ clinopyroxene orthopyroxene olivine) residue at 8 kbarand garnet granulite to eclogite (garnet + clinopyroxene) residuesat 12–32 kbar. Still higher degrees of melting ( 40–60%)result in mafic liquids corresponding to low-MgO, high-Al₂O₃basaltic and basaltic andesite compositions, which coexist withgranulitic residues at 8 kbar and edogitic or garnet granulitic(garnet + clinopyroxene + plagioclase orthopyroxene) residuesat higher pressures (12–28 kbar). As much as 40% by volumehigh-Al₂O₃ trondhjemitic-tonalitic liquid coexists with an eclogiticresidue at 1100–1150C and 32 kbar. The experimental datasuggest that the Archean tonalite-trondhjemite-granodiorite(TTG) suite of rocks, and their Phanerozoic equivalents, thetonalite-trondhjemite-dacite suite (including ‘adakites’and other Na-rich granitoids), can be generated by 10–40%melting of partially hydrated metabasalt at pressures abovethe garnet-in phase boundary (12 kbar) and temperatures between1000 and 1100C. Anomalously hot and/or thick metabasaltic crustis implied. Although a rare occurrence along modern convergentplate margins, subductionrelated melting of young, hot oceaniccrust (e.g. ocean ridges) may have been an important (essential)element in the growth of the continental crust in the Archean,if plate tectonic processes were operative. Coupled silicicmelt generation-segregation and mafic restite disposal may alsooccur at the base of continental or primitive (sub-arc?) crust,where crustal overthickening is a consequence of underplatingand overaccretion of mafic magmas. In either setting, net growthof continental crust and crustmantle recycling may be facilitatedby relatively high degrees of melting and extreme density contrastsbetween trondhjemitictonalitic liquids and garnet-rich residues.Continuous chemical trends are apparent between the experimentalcrystalline residues, and mafic migmatites and garnet granulitexenoliths from the lower crust, although lower-crustal xenolithsin general record lower temperatures (600–900C) and pressures(5–13 kbar) than corresponding residual assemblages fromthe experiments. However, geo-thermobarometry on eclogite xenolithsin kimberlites from the subcontinental mantle indicates conditionsappropriate for melting through and beyond the amphibole reactioninterval and the granulite-eclogite transition. If these samplesrepresent ancient (eclogitized) remnants of subducted or otherwisefoundered basaltic crust, then the intervening history of theirprotoliths may in some cases include partial melting. KEY WORDS: dehydration melting; metabasalt; continental growth; crust–mantle recycling ^*Corresponding author. Present address: Mineral Physics Institute and Center for High Pressure Research, Department of Earth and Space Sciences, State University of New York at Stony Brook, Stony Brook, NY 11794, USA