Effects of water-borne copper on metallothionein and lipid peroxidation in the marine amphipod Gammarus locusta

The aim of the current work was to determine over 10 days the effects of water-borne exposure of the marine amphipod Gammarus locusta to 4 microgCu l(-1) on the metallothionein (MT; measured by differential pulse polarography) protection system and lipid peroxidation (LP: thiobarbituric acid-reactive malondialdehyde equivalents) as a measure of oxidative damage. MT levels in exposed animals increased significantly at day 2 (36% > control; P < 0.001) and remained high at days 6 and 10 (55 and 38%, respectively, P < 0.001). The maximum level of MT at day 6 coincided with the highest Cu body-burden. LP increased within I day of exposure, indicative of Cu as an oxidative stressor. However, in contrast to MT, the highest LP level was seen at day 4 (68% > control, P < 0.001) before returning to control values by day 6, indicating a protective role of MT against the pro-oxidant effects of Cu.     

Abundance of the introduced seastar, Asterias amurensis, and spatial variability in soft sediment assemblages in SE Tasmania: Clear correlations but complex interpretation

The northern Pacific seastar, Asterias amurensis, was first collected in southeast Tasmania in 1986. Mistaken for the endemic asteroid Uniophora granifera, its true identity was not realised until 1992. It is now a conspicuous predator in soft sediment habitats in this region, and is considered a major threat to native assemblages and commercial species. We examined the structure of soft sediment assemblages at different spatial scales in southeast Tasmania, and correlated spatial variation in community composition with seastar abundances. We found that the structure of soft sediment assemblages is highly variable at a range of spatial scales from metres to tens of kilometres. Clear differences in the composition of assemblages and abundances of major taxa were detected between areas with and without seastars and between areas with low and high seastar densities. However, the nature of these patterns suggests that they are more likely due to differences in sediment characteristics than due to impacts of the seastar. Thus, spatial differences in soft sediment assemblages might have been erroneously attributed to seastars without detailed information on important physical factors such as sediment characteristics. A second survey, using larger sampling units (1 m²) but across a more limited spatial extent, targeted bivalves and heart urchins that were identified as important prey of the seastar in observations of feeding and in experimental studies. Large-scale patterns of abundance and size structure were consistent with seastar effects anticipated from small-scale experimental and feeding studies for some, but not all, species. While the field survey ultimately provided evidence about the presence or absence of seastar impacts at large-scales, the identification of key ecological variables in experimental and feeding studies proved crucial to both the design and interpretation of patterns observed in the large-scale surveys. Overall, this work highlighted the necessity to consider multiple lines of evidence rather than relying on a single ‘inferential’ test, in the absence of pre-impact data.     

Habitat characteristics and spatial arrangement affecting the diversity of fish and decapod assemblages of seagrass (Zostera marina) beds around the coast of Jersey (English Channel)

Recent research and management plans for seagrass habitats have called for landscape level approaches. The present study examines the spatial utilisation of subtidal seagrass beds by fish and decapods around the coast of Jersey (49°N 02° W). A hierarchical scale of landscape configuration and the plant characteristics of eight seagrass beds were measured and the contributions of these variables as predictors of the properties of the fish and decapod assemblages were evaluated using multiple linear regression models. The results indicated that total diversity had a negative relationship with transect heterogeneity and total species number had a weak negative association with increasing fragmentation. Both total diversity and total species number showed a positive relationship with depth. In fact, in all models of species number and densities, values were higher in deeper seagrass beds. Total decapod density increased with aggregation of seagrass patches within a landscape. In addition to landscape configuration, smaller-scale structural changes in both canopy height and epiphyte load appeared to influence densities of decapod crustaceans. At night, fewer patterns could be explained by the independent variables in the model.     

Manganese and iron distributions off central California influenced by upwelling and shelf width

In July 2002, a combination of underway mapping and discrete profiles revealed significant along-shore variability in the concentrations of manganese and iron in the vicinity of Monterey Bay, California. Both metals had lower concentrations in surface waters south of Monterey Bay, where the shelf is about 2.5 km wide, than north of Monterey Bay, where the shelf is about 10 km wide. During non-upwelling conditions over the northern broad shelf, dissolvable iron concentrations measured underway in surface waters reached 3.5 nmol L⁻¹ and dissolved manganese reached 25 nmol L⁻¹. In contrast, during non-upwelling conditions over the southern narrow shelf, dissolvable iron concentrations in surface waters were less than 1 nmol L⁻¹ and dissolved manganese concentrations were less than 5 nmol L⁻¹. A pair of vertical profiles at 1000 m water depth collected during an upwelling event showed dissolved manganese concentrations of 10 decreasing to 2 nmol L⁻¹, and dissolvable iron concentrations of 12–20 nmol L⁻¹ in the upper 100 m in the north, compared to 3.5–2 nmol L⁻¹ Mn and 0.6 nmol L⁻¹ Fe in the upper 100 m in the south, suggesting the effect of shelf width influences the chemistry of waters beyond the shelf.These observations are consistent with current understanding of the mechanism of iron supply to coastal upwelling systems: Iron from shelf sediments, predominantly associated with particles greater than 20 μm, is brought to the surface during upwelling conditions. We hypothesize that manganese oxides are brought to the surface with upwelling and are then reduced to dissolved manganese, perhaps by photoreduction, following a lag after upwelling.Greater phytoplankton biomass, primary productivity, and nutrient drawdown were observed over the broad shelf, consistent with the greater supply of iron. Incubation experiments conducted 20 km offshore in both regions, during a period of wind relaxation, confirm the potential of these sites to become limited by iron. There was no additional growth response when copper, manganese or cobalt was added in addition to iron. The growth response of surface water incubated with bottom sediment (4 nmol L⁻¹ dissolvable Fe) was slightly greater than in control incubations, but less than in the presence of 4 nmol L⁻¹ dissolved iron. This may indicate that dissolvable iron is not as bioavailable as dissolved iron, although the influence of additional inhibitory elements in the sediment cannot be ruled out.     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.     

Large-scale vertical hydroacoustic structure of the North Atlantic and its seasonal variability

A classification based on the number and types of large-scale acoustic waveguides is proposed for the mean seasonal profiles of sound speed propagation. A scheme for North Atlantic zoning, using typical curves of the sound speed vertical distribution, is given. The channel axis's position is shown not to depend on the water mass haline properties, being controlled by the temperature field vertical stratification.Translated by Vladimir A. Puchkin.     

Automatic Registration of TOBI Side-Scan Sonar and Multi-Beam Bathymetry Images for Improved Data Fusion

Deep towed side-scan sonar vehicles such as TOBI acquire high quality imagery of the seafloor with very high spatial resolution but poor locational accuracy. Fusion of the side-scan sonar data with bathymetry data from an independent source is often desirable to reduce ambiguity in geological interpretations, to aid in slant-range correction and to enhance seafloor representation. The main obstacle to fusion is accurate registration of the two datasets.The application of hierarchical chamfer matching to the registration of TOBI side-scan sonar images and multi-beam swath bathymetry is described. This matches low level features such as edges in the TOBI image, with corresponding features in a synthetic TOBI image created by simulating the flight of the TOBI vehicle through the bathymetry. The method is completely automatic, relatively fast and robust, and much easier than manual registration. It allows accurate positioning of the TOBI vehicle, enhancing its usefulness as a research tool. The method is illustrated by automatic registration of TOBI and multi-beam bathymetry data from the Mid-Atlantic Ridge.