A measurement of the 362 GHz absorption line of Mars atmospheric H2O2

The 362.156 GHz absorption spectrum of H₂O₂ in the Mars atmosphere was observed on September 4 of 2003, employing the James Clerk Maxwell Telescope (JCMT) sub-millimeter facility on Mauna Kea, Hawaii. Radiative transfer analysis of this line absorption yields an average volume mixing ratio of 18±0.4 ppbv within the lower (0-30 km) Mars atmosphere, in general accordance with standard photochemical models (e.g., Nair et al., 1994, Icarus 111, 124-150). Our derived H₂O₂ abundance is roughly three times greater than the upper limit retrieved by Encrenaz et al. (2002, Astron. Astrophys. 396, 1037-1044) from infrared spectroscopy, although part of this discrepancy may result from the different solar longitudes (L_s) of observation. Aphelion-to-perihelion thermal forcing of the global Mars hygropause generates substantial (>200%) increases in HO_x abundances above ∼10 km altitudes between the L_s=112° period of the Encrenaz et al. upper limit measurement and the current L_s=250° period of detection (Clancy and Nair, 1996, J. Geophys. Res. 101, 12785-12590). The observed H₂O₂ line absorption weakens arguments for non-standard homogeneous (Encrenaz et al., 2002, Astron. Astrophys. 396, 1037-1044) or heterogeneous (Krasnopolsky, 2003a, J. Geophys. Res. 108; 2003b, Icarus 165, 315-325) chemistry, which have been advocated partly on the basis of infrared (8 μm) non-detections for Mars H₂O₂. Observation of Mars H₂O₂ also represents the first measurement of a key catalytic specie in a planetary atmosphere other than our own.     

Modes to replace transitional asymptotic ray fields in a vertically inhomogeneous earth model

Summary. Asymptotic ray theory (ART) fails in transition regions near critically reflected, bottom glancing or caustic-forming rays in a vertically inhomogeneous layered earth. These deficiencies are repaired here by replacing the transitional ray fields with guided modes plus truncation remainders. Exact ray-mode equivalences and their high-frequency asymptotic approximations are formulated, and their validity and efficiency are verified by numerical comparisons for SH motion in a two-layer earth model comprised of an inhomogeneous sediment above an homogeneous semi-infinite bedrock.     

Self-similar solutions for the blast wave problem in radiative gasdynamics,I

Similarity solutions, describing the flow of a perfect gas behind spherical shock waves, are investigated including the radiation heat flux. The shock is assumed to be propagating in a medium at rest. Shock radius varies exponentially with time and density is inversely proportional to fifth power of the shock radius immediately ahead of the shock front.     

Kinematics of stars in Kovalsky-Kapteyn figures. II

Rostov State Pedagogical Institute; All-Union Scientific Research Institute Gradient. Translated from Astrofizika, Vol. 33, No. 3, pp. 379–393, November–December, 1990.     

OTEC cold-water pipe research

Shelf-mounted Ocean Thermal Energy Conversion (OTEC) plants require installation of cold-water pipes (CWP) on slopes of40degto depths of 1000 m. In addition, tower platforms containing OTEC power systems may be located on lesser sloped terrain near shore and exposed to special environmental loading problems affecting foundation design. Shelf-mounted installations require careful attention to site selection and geotechnical considerations for foundation integrity on sloped surfaces. This paper primarily discusses research associated with cold-water pipe and foundation installations on steep slopes, although research continues on tower platforms located on the shelf. At least five nations are in various stages of development of OTEC systems for island applications. Each of their systems is either shelf mounted or land based and requires that a large diameter cold-water pipe be installed on a steep slope to provide cold water from 1000-m depths. In addition to the installation and deployment of the large cold-water pipe, the most significant problem is the design and installation of suitable foundations that will last for several decades. To date there is very little experience in the offshore industry for large installations on steep slopes. A major scale-model research project is underway on the slopes of the island of Hawaii. A section of pipe 2.4 m in diameter and 24 m long was installed using combination concrete foundations and joints. The pipe and foundations are fully instrumented to measure environmental loading forces due principally to currents and waves. Environmental measurements will also be taken in the test area. The measurement data will be used to validate available analytical models for subsequent use in aiding industry in providing more cost-effective designs for OTEC pipes and foundations.     

Three dimensional simulation of fluid flow in X‐ray CT images of porous media

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Range of validity of seismic ray and beam methods in general inhomogeneous media – I. General theory

Summary. The limitations of asymptotic wave theory and its geometrical manifestations are newly formalized and scrutinized. Necessary and sufficient conditions for the existence of acoustic and seismic rays and beams in general inhomogeneous media are expressed in terms of new physical parameters: the threshold frequency ω₀ associated with the P/S decoupling condition, the cut-off frequency ω_c associated with the radiation-zone condition, the total curvature of the wavefront and the Fresnel-zone radius.
The analysis is facilitated with the introduction of a new ancillary functional – the hypereikonal which is capable of representing ordinary as well as evanescent waves. The hypereikonal is the natural extension of the eikonal theory.
With the aid of the above new parameters, simple conditions are obtained for the decoupled far field, the decoupled near field, two point dynamic ray tracing, paraxial wavefields and Gaussian beams.