Generation of greenhouse effect gases from different landfill types

Recently much attention is focussed on the problems of global warming due to greenhouse effect gases, notably carbon dioxide and methane. Because these gases cause important problems to the global environment, their generation from landfill sites containing solid wastes has drawn attention and their environmental impact is causing concern.

Generally, the gases associated with a greenhouse effect include carbon dioxide, methane and nitrous oxide. However, there are no general basic data available concerning gases generated from biodegradation of solid wastes in landfill sites. Specifically, no assessment has been made concerning greenhouse effect gases from different landfill types.

This paper proposes a quantitative model for estimating the gasification rate by different landfill types. The model is based on measurement data for a long-term material balance for an aerobic landfill and an anaerobic landfill, obtained with two types of large-scale lysimeters.

This paper will also give an estimate for the amount of greenhouse effect gases by for different types of landfill and propose countermeasures for their reduction.     

Radiocarbon dates of elevated shorelines,Indonesia and Malaysia. Part 1

Four new radiocarbon dates of elevated strandlines in tectonically active areas of eastern Indonesia and East Malaysia indicate average rates of uplift that range between 4.5 and 9 mm annually during the past 24,000 yr. These values are at least three times higher than former estimates from eastern Indonesia. Another radiocarbon date from the south arm of Sulawesi—also tectonically mobile—indicates a rate of uplift of 1.4–2.5 mm per year which corresponds with earlier determinations. This particular case, however, suggests that the sample was probably located close to a north-south axis about which southern Sulawesi was tilted during the Quaternary.     

Short-range prediction experiments of the Kuroshio path variabilities south of Japan

Assimilation and prediction experiments of the Kuroshio path variability south of Japan were conducted to investigate the predictability of the Kuroshio path. The assimilation and prediction system is composed of an eddy-resolving model and a three-dimensional variational analysis scheme with vertical coupled temperature–salinity empirical orthogonal function modes. The sea surface height (SSH) variability and the variations of the Kuroshio path of the assimilation fields are in good agreement with those observed. The results of the assimilation are then used as the initial conditions for 138 cases of 90-day prediction experiments conducted from 1993 to 2004. The predictive limit of our system is assessed by the SSH anomaly in the assimilation field and is found to be around 40–60 days, which is much longer than that of the persistence. The prediction results show good performance in the transition stage from a straight to a meandering path. For example, a large meandering event that occurred in August 2004 is successfully predicted in a 2-month forecast. Two types of failure cases are investigated. One is a case where the eastward propagation speed of the meander is faster than a real state. The dynamical response of the model to the assimilation revealed that an initial shock, caused by the dynamically unbalanced initial condition, induces the fast eastward propagation of the meander. The other case exhibits an unrealistic meander. In this case, a cold anomaly at an intermediate layer in the initial condition grows rapidly and results in the unrealistic meander. This implies that the Kuroshio path south of Japan has a chaotic nature. These facts revealed by the failure cases give us some insight for improving the predictive skill of the Kuroshio path variability.     

Composition of liquids coexisting with spinel lherzolite at 10 kbar and the genesis of MORBs

Because of the controversy over the nature of the parental magma for MORBs, experiments have been performed at 10 kbar in order to assess the effect of modal variations in the source peridotite and the effect of temperature (degree of partial melting) on the composition of partial melts. A peridotite-basalt sandwich method was used and a run duration of 72 h was found to be necessary to equilibrate basalt and peridotite. A range of melt compositions, coexisting with olivine, orthopyroxene, clinopyroxene and spinel, was produced at 10 kbar, indicating that partial melting of peridotite cannot be regarded as isobarically pseudoinvariant. On projections in the normative tetrahedron OL-PL-CPX-SIL, the liquids obtained in this study define an area, rather than a point or narrow band. The compositions of some liquids in this study are similar to magnesian MORBs (MgO>9.5 wt%), providing evidence in support of the derivation of magnesian MORBs by partial melting of mantle lherzolite at about 10 kbar.     

Nonlinear surface ground analysis via statistical approach

A statistical approach is proposed for nonlinear surface ground analysis. In contrast to the conventional method which deals with only a single ground motion for equivalent linearization of soil properties, a design response spectrum defined at the upper level (bottom of the surface ground) of an engineering bedrock can be handled as the target design earthquake in the present paper. The effective shear strain in each soil layer is evaluated by means of a statistical procedure in which the mean peak shear strain is computed in terms of its standard deviation and the corresponding peak factor. The stiffness and damping ratio of each soil layer are obtained iteratively from the nonlinear relation of stiffness reduction factors and damping ratios with respect to the strain level. After the evaluation of the equivalent stiffness and damping ratio of every soil layer, the ground surface response spectrum is transformed from the design response spectrum defined at the upper level of the engineering bedrock via the one-dimensional wave propagation theory. The reliability and accuracy of the proposed analysis method is examined through the comparison with the results by the conventional method (represented by the program) for many simulated spectrum-compatible ground motions.     

Deformable backstop as seaward end of coseismic slip in the Nankai Trough seismogenic zone

Wide-angle seismic surveys performed in the last decade have clarified the 3-D crustal structure along the Nankai Trough. The geometry and velocity structure of the southwestern Japan subduction zone are now well constrained. Comparing these observations with the rupture distribution of historic great thrust earthquakes, it appears that the coseismic rupture occurred along plate boundaries deeper than the wedge/backstop boundary (the boundary between the Neogene-Quaternary accretionary wedge and the crust forming the backstop). From the view of spatial relationship, both rupture distributions of the last two large events and the crust forming the backstop are considerably retreated from the trough axis in the west and east off the Kii Peninsula. In both areas, seamount or ridge subduction is apparent in seismic results, geomorphological data and geomagnetic data. The landward indentation of the deformable backstop, which corresponds to the crustal block of old accreted sediments, may be formed by seamount subduction according to published results of sandbox modeling. In particular, the subducted seamount may be a structural factor affecting the recession of the crustal block forming the backstop.     

Decreases in turbidity during neap tides initiate late winter blooms of Eucampia zodiacus in a macrotidal embayment

Eucampia zodiacus Ehrenberg is harmful, as it causes reduction in the quality of the aquacultured Porphyra thalli owing to nutrient depletions during dense blooms in the late winter in the macrotidal Ariake Sea, Japan. To understand the mechanism of bloom development, changes in the abundance of E. zodiacus during a bloom were investigated along vessel transects from February to April 2012. In addition, marine environmental variables were continuously monitored by the Ariake Sea Monitoring Tower, which revealed that turbidity periodically decreased during neap tides. During the 16 February neap tide, a high Secchi depth (4.3 m) was recorded at offshore stations and the Z _1% depth, at which the light intensity attenuates to 1 % of that at the sea surface, exceeded the water depth. On 16 February, the abundance of E. zodiacus was 52–732 cells mL^?1, peaking at 7.0 m depth offshore. Subsequently, abundance increased at all stations. During the 22 February spring tide, abundance became vertically uniform. On 19 March, abundance at the tower reached 3758 cells mL^?1 at the surface. We conclude that an improvement in light conditions in the deeper layer triggered the bloom, although the size and the duration of the bloom were determined by nutrient availability. Thus, decreases in turbidity during neap tides and subsequent strong vertical mixing during spring tides may be instrumental in the population dynamics of the large diatom E. zodiacus in macrotidal environments.     

The 15 September 1991 pyroclastic flows at Unzen Volcano (Japan): a flow model for associated ash-cloud surges

Large-scale collapse of a dacite dome in the late afternoon of 15 September 1991 generated a series of pyroclastic-flow events at Unzen Volcano. Pyroclastic flows with a volume of 1×10⁶ m³ (as DRE) descended the northeastern slope of the volcano, changing their courses to the southeast due to topographic control. After they exited a narrow gorge, an ash-cloud surge rushed straight ahead, detaching the main body of the flow that turned and followed the topographic lows to the east. The surge swept the Kita-Kamikoba area, which had been devastated by the previous pyroclastic-flow events, and transported a car as far as 120 m. Following detachment, the surge lost its force after it moved several hundred meters, but maintained a high temperature. The deposits consist of a bottom layer of better-sorted ash (unit 1), a thick layer of block and ash (unit 2), and a thin top layer of fall-out ash (unit 3). Unit 2 overlies unit 1 with an erosional contact. The upper part of unit 2 grades into better-sorted ash. At distal block-and-ash flow deposits, the bottom part of unit 2 also consists of better-sorted ash, and the contact with the unit 1 deposits becomes ambiguous. Video footage of cascading pyroclastic flows during the 1991–1995 eruption, traveling over surfaces without any topographic barriers, revealed that lobes of ash cloud protruded intermittently from the moving head and sides, and that these lobes surged ahead on the ground surface. This fact, together with the inspection by helicopter shortly after the events, suggests that the protruded lobes consisted of better-sorted ash, and resulted in the deposits of unit 1. The highest ash-cloud plume at the Oshigadani valley exit, and the thickest deposition of fall-out ash over Kita-Kamikoba and Ohnokoba, indicate that abundant ash was also produced when the flow passed through a narrow gorge. In the model presented here, the ash clouds from the pyroclastic flows were composed of a basal turbulent current of high concentration (main body), an overriding and intermediate fluidization zone, and an overlying dilute cloud. Release of pressurized gas in lava block pores, due to collisions among blocks and the resulting upward current, caused a zone of fluidization just above the main body. The mixture of gas and ash sorted in the fluidization zone moved ahead and to the side of the main body as a gravitational current, where the ash was deposited as surge deposits. The main body, which had high internal friction and shear near its base, then overran the surge deposits, partially eroding them. When the upward current of gas (fluidization) waned, better-sorted ash suspended in the fluidization zone was deposited on block-and-ash deposits. In the distal places of block-and-ash deposits, unit 2 probably was deposited in non-turbulent fashion without any erosion of the underlying layer (unit 1).     

Groundmass pargasite in the 1991–1995 dacite of Unzen volcano: phase stability experiments and volcanological implications

Pargasite commonly occurs in the dacitic groundmass of the 1991–1995 eruption products of Unzen volcano. We described the occurrence and chemical compositions of amphibole in the dacite, and also carried out melting experiments to determine the low-pressure stability limit of amphibole in the dacite. The 1991–1995 ejecta of the Unzen volcano show petrographic evidence of magma mixing, such as reverse compositional zoning of plagioclase and amphibole phenocrysts, and we used a groundmass separate as a starting material for the experiments. Reversed experiments show that the maximum temperature for the crystallization of amphibole is 930°C at 196 MPa, 900°C at 98 MPa, and 820°C at 49 MPa. Compared with the experimental results on the Mount St. Helens dacite, present experiments on the Unzen dacitic groundmass show that amphibole is stable to pressures ca. 50 MPa lower at 850°C. Available Fe–Ti oxide thermometry indicates the crystallization temperature of the groundmass of the Unzen dacite to be 880±30°C, suggesting that the groundmass pargasite crystallized at >70 MPa, corresponding to a depth of more than 3 km in the conduit. The chlorine content of the groundmass pargasite is much lower than that of phenocrystic magnesiohornblende in the 1991–1995 dacite of Unzen volcano, indicating that vesiculation/degassing of magma took place before the crystallization of the groundmass pargasite. The present study shows that the magma was water oversaturated and that the degassing of magma along with magma mixing caused crystallization of the groundmass amphibole at depths of more than 3 km in the conduit.