CCD-DRIFT SCAN MEASUREMENTS OF THE SOLAR DIAMETER: METHOD AND FIRST RESULTS

A new method of measuring the solar diameter, combining the advantages of both photoelectric and visual drift-timing techniques, has been put into operation at Observatorio del Teide/Tenerife: a CCD camera is placed in the focus of the Gregory–Coudé Telescope, and a number of two-dimensional pictures are quickly read out during the passage of each of the two opposite limbs of the Sun across the CCD. Accurate time marks are stored in each frame, and image motion due to the Earth's atmosphere is compensated by fitting the limb positions in each series of frames with respect to time and by reducing them to a common reference position. The first results are described and compared with those of visual measurements.     

Applying size segregation to relate the surrounding aerosol pollution to its source

Size segregated sampling of aerosol particles at the coal-fired power station Šoštanj, Slovenia was performed by a newly developed system. In addition, simultaneous sampling of particles was performed at two locations, Velenje and Veliki vrh, chosen on the basis of long term monitoring of SO₂ in the influential area of power plant. The signature of the power plant (e.g. characteristic size distributions of some typical trace elements) was identified. For elements, like As, Mo, Cd and Ga, which are typical for coal combustion, the highest concentrations were observed in the size range between 1 and 4 μm. For Se and sometimes for Ga two modes were identified, first between 0.1 and 0.5 μm and second between 1 and 4 μm. Ratios between the average concentrations of selected elements in fine and coarse particles collected at Veliki vrh (the most influenced location) and Velenje (usually not influenced by the thermo power station) were significantly higher than 1 in the case of Mo and Se for coarse and fine size range, while for As the ratio was higher than 1 for the coarse fraction. Consequently, Mo, Se and As were found as the most important tracers for the emissions from the investigated source. On the basis of the ratios between the concentrations of elements measured in particles at low and high SO₂ concentrations at Veliki vrh, Cd was shown to be a typical tracer as well. Our results definitely showed that size segregated measurements of particles at the source and in the influenced area give more precise information on the influence of source to the surrounding region. It was found that patterns of size distributions for typical trace elements observed at the source are found also in the influenced area, i.e. Veliki vrh.     

Accessory mineral U–Th–Pb ages and <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar eruption chronology,and their bearing on rhyolitic magma evolution in the Pleistocene Coso volcanic field,California

We determined Ar/Ar eruption ages of eight extrusions from the Pleistocene Coso volcanic field, a long-lived series of small volume rhyolitic domes in eastern California. Combined with ion-microprobe dating of crystal ages of zircon and allanite from these lavas and from granophyre geothermal well cuttings, we were able to track the range of magma-production rates over the past 650 ka at Coso. In ≤230 ka rhyolites we find no evidence of protracted magma residence or recycled zircon (or allanite) from Pleistocene predecessors. A significant subset of zircon in the ~85 ka rhyolites yielded ages between ~100 and 200 Ma, requiring that generation of at least some rhyolites involves material from Mesozoic basement. Similar zircon xenocrysts are found in an ~200 ka granophyre. The new age constraints imply that magma evolution at Coso can occur rapidly as demonstrated by significant changes in rhyolite composition over short time intervals (≤10’s to 100’s ka). In conjunction with radioisotopic age constraints from other young silicic volcanic fields, dating of Coso rhyolites highlights the fact that at least some (and often the more voluminous) rhyolites are produced relatively rapidly, but that many small-volume rhyolites likely represent separation from long-lived mushy magma bodies.     

Experimental calibration of oxygen isotope fractionation between quartz and zircon

We report the results of an experimental calibration of oxygen isotope fractionation between quartz and zircon. Data were collected from 700 to 1000 °C, 10–20 kbar, and in some experiments the oxygen fugacity was buffered at the fayalite–magnetite–quartz equilibrium. Oxygen isotope fractionation shows no clear dependence on oxygen fugacity or pressure. Unexpectedly, some high-temperature data (900–1000 °C) show evidence for disequilibrium oxygen isotope partitioning. This is based in part on ion microprobe data from these samples that indicate some high-temperature quartz grains may be isotopically zoned. Excluding data that probably represent non-equilibrium conditions, our preferred calibration for oxygen isotope fractionation between quartz and zircon can be described by:

This relationship can be used to calculate fractionation factors between zircon and other minerals. In addition, results have been used to calculate WR/melt–zircon fractionations during magma differentiation. Modeling demonstrates that silicic magmas show relatively small changes in δ¹⁸O values during differentiation, though late-stage mafic residuals capable of zircon saturation contain elevated δ¹⁸O values. However, residuals also have larger predicted melt–zircon fractionations meaning zircons will not record enriched δ¹⁸O values generally attributed to a granitic protolith. These results agree with data from natural samples if the zircon fractionation factor presented here or from natural studies is applied.     

Spontaneous Formation of Magnetic Flux Concentrations in Stratified Turbulence

The negative effective magnetic pressure instability discovered recently in direct numerical simulations (DNSs) may play a crucial role in the formation of sunspots and active regions in the Sun and stars. This instability is caused by a negative contribution of turbulence to the effective mean Lorentz force (the sum of turbulent and non-turbulent contributions) and results in the formation of large-scale inhomogeneous magnetic structures from an initially uniform magnetic field. Earlier investigations of this instability in DNSs of stably stratified, externally forced, isothermal hydromagnetic turbulence in the regime of large plasma ?? are now extended into the regime of larger scale separation ratios where the number of turbulent eddies in the computational domain is about 30. Strong spontaneous formation of large-scale magnetic structures is seen even without performing any spatial averaging. These structures encompass many turbulent eddies. The characteristic time of the instability is comparable to the turbulent diffusion time, L ²/?? _t, where ?? _t is the turbulent diffusivity and L is the scale of the domain. DNSs are used to confirm that the effective magnetic pressure does indeed become negative for magnetic field strengths below the equipartition field. The dependence of the effective magnetic pressure on the field strength is characterized by fit parameters that seem to show convergence for larger values of the magnetic Reynolds number.     

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.     

Simultaneous determination of dissolved organic carbon and total dissolved nitrogen in seawater by high temperature catalytic oxidation: conditions for precise shipboard measurements

Appropriate conditions have been achieved for the accurate, rapid, and highly precise shipboard simultaneous determination of dissolved organic carbon and total dissolved nitrogen in seawater by high temperature catalytic oxidation. A nitrogen-specific Antek 705D chemiluminescence detector and a CO₂-specific LiCor Li6252 IRGA have been coupled in-series with a Shimadzu TOC-5000 organic carbon analyser. Precision of both simultaneous measurements is ≤1.5%, i.e. ±1 μmol C l⁻¹ and ±0.3 μmol N l⁻¹, respectively. Quality of analysis is not compromised by vibrations associated with ocean going research vessels.