Emission curve of growth for Feii in chromospheric limb spectra

The 270 chromospheric emission lines of Feii ranging between 2000 and 3200 Å observed by Skylab at a height of 4 (2900 km) above the limb of the quiet Sun are analyzed by the emission curve of growth method, using newly calculated gf-values. It is derived that the excitation temperature is 7.2 × 10³ K and that the turbulent velocity is consistent with the previous results that the microturbulent velocity is lower than 10 km s^–1 in the cool (<10⁴ K) region of the chromosphere.Contributions from the Kwasan and Hida Observatories, University of Kyoto, No. 270.     

Enhanced chlorophyll associated with island-induced cyclonic eddies in the eastern channel of the Tsushima Straits

The relationship between island-induced cyclonic eddies and chlorophyll a (chl-a) was investigated using field data and satellite images in the eastern channel of the Tsushima Straits. The maximum chl-a concentration around the leeward eddy of the Tsushima Islands was two or three times greater than that of outside the eddy. Two different mechanisms of chl-a enhancement associated with island-induced cyclonic eddies were found in the post-bloom periods. In summer, when nutrients were depleted in the surface layer, eddy pumping increased the nutrient supply in the euphotic zone, resulting in enhanced chl-a around the shallow thermocline near the eddy core. In late autumn, when the mixed layer deepened over the euphotic zone, the mixed layer depth became shallow due to the doming effect of the cyclonic eddy, therefore, the improved irradiance condition led to an increase in the chl-a concentration in the surface mixed layer. Nighttime satellite visible images showed a number of fishing vessels in the lee region of the Tsushima Islands, implying that the enhanced phytoplankton biomass may have resulted in good feeding conditions for fishes and squids in the Tsushima Straits.     

Estimating the impact force generated by granular flow on a rigid obstruction

Flowing sediments such as debris and liquefied soils could exert a tremendous amount of force as they impact objects along their paths. The total impact force generally varies with slope angle, velocity at impact, and thickness of the flowing sediment. Estimation of the impact force of flowing sediments against protective measures such as earth retaining structures is an important factor for risk assessment. In this paper, we conduct small-scale laboratory physical modeling of sand flow at different slopes and measure the impact force exerted by this material on a fixed rigid wall. We also conduct numerical simulations in the Eulerian framework using computational fluid dynamics algorithms to analyze and reproduce the laboratory test results. The numerical simulations take into consideration the overtopping of the wall with sand, which influenced the measured impact force–time history responses. In addition, the numerical simulations are shown to capture accurately the change of the impact force with slope angle. Finally, the modeling approach conducted in this study is used to estimate the quasi-static force generated by the sediment as it comes to rest on the wall following impact.     

Responses of phytoplankton and heterotrophic bacteria in the northwest subarctic Pacific to in situ iron fertilization as estimated by HPLC pigment analysis and flow cytometry

To verify the hypothesis that the growth of phytoplankton in the Western Subarctic Gyre (WSG), which is located in the northwest subarctic Pacific, is suppressed by low iron (Fe) availability, an in situ Fe fertilization experiment was carried out in the summer of 2001. Changes over time in the abundance and community structure of phytoplankton were examined inside and outside an Fe patch using phytoplankton pigment markers analyzed by high-performance liquid chromatography (HPLC) and flow cytometry (FCM). In addition, the abundance of heterotrophic bacteria was also investigated by FCM. The chlorophyll a concentration was initially ca. 0.9 μg l⁻¹ in the surface mixed layer where diatoms and chlorophyll b-containing green algae (prasinophytes and chlorophytes) were predominant in the chlorophyll biomass. After the iron enrichment, the chlorophyll a concentration increased up to 9.1 μg l⁻¹ in the upper 10 m inside the Fe patch on Day 13. At the same time, the concentration of fucoxanthin (a diatom marker) increased 45-fold in the Fe patch, and diatoms accounted for a maximum 69% of the chlorophyll biomass. This result was consistent with a microscopic observation showing that the diatom Chaetoceros debilis had bloomed inside the Fe patch. However, chlorophyllide a concentrations also increased in the Fe patch with time, and reached a maximum of 2.2 μg l⁻¹ at 5 m depth on Day 13, suggesting that a marked abundance of senescent algal cells existed at the end of the experiment. The concentration of peridinin (a dinoflagellate marker) also reached a maximum 24-fold, and dinoflagellates had contributed significantly (>15%) to the chlorophyll biomass inside the Fe patch by the end of the experiment. Concentrations of 19′-hexanoyloxyfucoxanthin (a prymnesiophyte marker), 19′-butanoyloxyfucoxanthin (a pelagophyte marker), and alloxanthin (a cryptophyte marker) were only incremented a few-fold increment inside the Fe patch. On the contrary, chlorophyll b concentration reduced to almost half of the initial level in the upper 10 m water column inside the Fe patch at the end of the experiment. A decrease with time in the abundance of eukaryotic ultraphytoplankton (<ca. 5 μm in size), in which chlorophyll b-containing green algae were possibly included was also observed by FCM. Overall, our results indicate that Fe supply can dramatically alter the abundance and community structure of phytoplankton in the WSG. On the other hand, cell density of heterotrophic bacteria inside the Fe patch was maximum at only ca. 1.5-fold higher than that outside the Fe patch. This indicates that heterotrophic bacteria abundance was little respondent to the Fe enrichment.     

Micro-X-ray fluorescence-based comparison of skeletal structure and P, Mg, Sr, O and Fe in a fossil of the cold-water coral Desmophyllum sp., NW Pacific

Micro-scale distributions of trace and minor elements in, for example, coral skeletons are crucial as geochemical tracers of past environmental conditions, because they have the inherent advantage of accounting for confounding diagenetic and physiological effects. To extract reproducible paleoceanographic records from coral skeletons, a selective measurement of specific ultrastructures at high spatial resolution is required. Compared to warm-water reef-building corals, such data are limited in cold-water corals and, to the best of the authors’ knowledge, the latter have to date not been examined by means of micro-X-ray fluorescence. This technique was used for micrometer-scale imaging of P, Mg, Sr, O, and Fe intensities (counts per unit time) in a fossil specimen (as yet unknown age) of the cold-water coral Desmophyllum sp. from surface sediments of the NW Pacific. Cross plots confirmed that the micro-XRF signals were associated with corresponding trends in elemental concentration (ppm). Two major structural components of the septum—centers of calcification (COCs) and the surrounding fibrous aragonite portion—differed in composition. The COCs were characterized by higher intensities of P and Mg (650 and 220 counts per 5 s, respectively), and lower intensities of Sr (2,800) and O (580; corresponding values for the fibrous aragonite are 370, 180, 3,300 and 620 counts per 5 s, respectively). Oxygen intensity values were mostly homogeneous, but slightly lower in COCs and substantially higher in a well-defined patch in the fibrous aragonite. The mostly homogeneous P signals in the fibrous aragonite confirm the utility of this structural component and of coral septa in general for tracer studies of oceanic P. Nevertheless, spot occurrences of elevated P (>950 counts per 5 s) spanning tens of micrometers in specific parts of the fibrous region of the septum would cause overestimates of oceanic P, and should evidently not be overlooked in future research. The distribution of Fe showed no correlation with P, indicating no significant contamination in the form of P-bearing diagenetic ferromanganese precipitates. Such hotspots plausibly reflect the presence of other mineral phases, such as crystalline hydroxylapatite inclusions or contamination with organic material. The P signal intensity was positively correlated with Mg (r=0.553, p<0.001), and negatively with Sr (r=–0.489, p<0.001) and O (r=–0.311, p<0.001). There was no discernible evidence of control by water temperature in the Sr distribution pattern. These findings establish micro-X-ray fluorescence as a highly suitable pre-screening tool in cold-water coral sclerochronology, which can serve to refine sampling strategies without sample damage, and complement other micrometer-scale spatial distribution analyses of elements (notably, Ca) based on well-known approaches involving micro-milling, electron microprobes, secondary ion mass spectrometry, and laser ablation.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

Reaction-induced grain boundary cracking and anisotropic fluid flow during prograde devolatilization reactions within subduction zones

Devolatilization reactions during prograde metamorphism are a key control on the fluid distribution within subduction zones. Garnets in Mn-rich quartz schist within the Sanbagawa metamorphic belt of Japan are characterized by skeletal structures containing abundant quartz inclusions. Each quartz inclusion was angular-shaped, and showed random crystallographic orientations, suggesting that these quartz inclusions were trapped via grain boundary cracking during garnet growth. Such skeletal garnet within the quartz schist formed related to decarbonation reactions with a positive total volume change (?V _t > 0), whereas the euhedral garnet within the pelitic schists formed as a result of dehydration reaction with negative ?V _t values. Coupled hydrological–chemical–mechanical processes during metamorphic devolatilization reactions were investigated by a distinct element method (DEM) numerical simulation on a foliated rock that contained reactive minerals and non-reactive matrix minerals. Negative ?V _t reactions cause a decrease in fluid pressure and do not produce fractures within the matrix. In contrast, a fluid pressure increase by positive ?V _t reactions results in hydrofracturing of the matrix. This fracturing preferentially occurs along grain boundaries and causes episodic fluid pulses associated with the development of the fracture network. The precipitation of garnet within grain boundary fractures could explain the formation of the skeletal garnet. Our DEM model also suggests a strong influence of reaction-induced fracturing on anisotropic fluid flow, meaning that dominant fluid flow directions could easily change in response to changes in stress configuration and the magnitude of differential stress during prograde metamorphism within a subduction zone.     

Influence of flooding on groundwater flow in central Cambodia

Cambodia is affected by flooding from the Mekong, Tonle Sap and Bassac rivers every year, which harms human populations and damages property, as well as alters the water quality in aquifer systems. The objective of this paper is to highlight the effects of river flooding on groundwater flow using numerical simulation. A two-dimensional groundwater flow model coupled with a groundwater recharge model was applied to the research area in central Cambodia. River level variation was included in model processes, and flood areas and periods were assigned. The results showed that during flooding periods, floodwater from the three rivers played an important role in recharging groundwater. During the dry season, Tonle Sap River received groundwater supply from the northwest, and levels in the Bassac and Mekong River dropped to lower than the groundwater level. This study improves understanding of the surface water and groundwater flow system in the study area.     

The social and political complexities of learning in carbon capture and storage demonstration projects

Demonstration of a fully integrated power plant with carbon capture and storage (CCS) at scale has not yet been achieved, despite growing international political interest in the potential of the technology to contribute to climate change mitigation and calls from multiple constituents for more demonstration projects. Acknowledging the scale of learning that still must occur for the technology to advance towards deployment, multiple CCS demonstration projects of various scales are emerging globally. Current plans for learning and knowledge sharing associated with demonstration projects, however, seem to be limited and narrowly conceived, raising questions about whether the projects will deliver on the expectations raised. Through a comparison of the structure, framing and socio-political context of three very different CCS demonstration projects in different places and contexts, this paper explores the complexity of social learning associated with demonstration projects. Variety in expectations of the demonstration projects’ objectives, learning processes, information sharing mechanisms, public engagement initiatives, financing and collaborative partnerships are highlighted. The comparison shows that multiple factors including the process of building support for the project, the governance context and the framing of the project matter for the learning in demonstration projects. This analysis supports a broader conceptualization of learning than that currently found in CCS demonstration plans - a result with implications for both future research and practice.     

Similarity measurement on human mobility data with spatially weighted structural similarity index (SpSSIM)

Understanding diverse characteristics of human mobility provides profound knowledge of urban dynamics and complexity. Human movements are recorded in a variety of data sources and each describes unique mobility characteristics. Revealing similarity and difference in mobility data sources facilitates grasping comprehensive human mobility patterns. This study introduces a new method to measure similarities on two origin–destination (OD) matrices by spatially extending an image‐assessment tool, the structural similarity index (SSIM). The new measurement, spatially weighted SSIM (SpSSIM), utilizes weight matrices to overcome the SSIM sensitivity issue due to the ordering of OD pairs by explicitly defining spatial adjacency. To evaluate SpSSIM, we compared performances between SSIM and SpSSIM with resampling the orders of OD pairs and conducted bootstrapping to test the statistical significance of SpSSIM. As a case study, we compared OD matrices generated from three data sources in San Diego County, CA: U.S. Census‐based Longitudinal Employer–Household Dynamics Origin–Destination employment statistics, Twitter, and Instagram. The case study demonstrated that SpSSIM was able to capture similarities of mobility patterns between datasets that varied by distance. Some regions showed local dissimilarity while the global index indicated they were similar. The results enhance the understanding of complex mobility patterns from various datasets, including social media.